[Slackbuilds-users] Installing gnucash 2.4.5----

Mon Aug 8 11:54:51 UTC 2011

2011/8/8 Ozan Türkyılmaz <ozan.turkyilmaz at gmail.com>

> remove old version and re try the build. It's a known problem without
> a real solution.
>

Yes, that's certainly good advice. I think this is inherent in the extremely
complex method used to build gnucash from source. I ran into similar
problems trying to build one of the 2.4 series from source with 2.2.9
installed. The advice I got from Derek Atkins, one of the gnucash gurus, was
to either remove the old version or configure with a --prefix != /usr/local.
The former would seem to apply in this case.

>
> 2011/8/8 jamesgilmour <jh-gilmour at bigpond.com>:
> >  Hi,
> >        I'm trying to install gnucash but it doesn't get past the
> >        bottom of this page.
> >        I had no problem with gnucash 2.2.9 and then tried the upgrade.
> >        I followed the dependency compilation instructions without
> >        apparent difficulty and elected to include 'webkit' and libdb,
> >        also ok.
> >
> >        Here is the last screen of the 'gnucash'build process before it
> >        stops.
> >        Can you help?
> >
> >  after-statement -O2 -march=i486 -mtune=i686 -Wall -Wunused
> >  -Wmissing-prototypes -Wmissing-declarations  -Wno-unused   -o gnucash
> >  gnucash-bin.o  ../../src/libqof/qof/libgnc-qof.la ../../src/core-utils/
> libgnc-core-utils.la ../../src/engine/libgncmod-engine.la ../../src/gnome/
> libgnc-gnome.la ../../src/gnome-utils/libgncmod-gnome-utils.la../../src/app-utils/
> libgncmod-app-utils.la ../../src/gnc-module/libgnc-module.la
> >  -pthread  -lguile -lltdl -lgmp -lcrypt -lm -lltdl -pthread
> >  -Wl,--export-dynamic -lgobject-2.0 -lgthread-2.0 -lgmodule-2.0 -lrt
> >  -lglib-2.0   -pthread -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2
> >  -lgnomecanvas-2 -lgnome-2 -lpopt -lbonobo-2 -lbonobo-activation
> >  -lORBit-2 -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0
> >  -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo
> >  -lpango-1.0 -lfreetype -lfontconfig -lgconf-2 -lgmodule-2.0
> >  -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0   -pthread -lgtk-x11-2.0
> >  -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0
> >  -lgdk_pixbuf-2.0 -lm -lcairo -lpango-1.0 -lfreetype -lfontconfig
> >  -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0   -lm  -lm
> >  libtool: link: gcc -Wdeclaration-after-statement -O2 -march=i486
> >  -mtune=i686 -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations
> >  -Wno-unused -o .libs/gnucash gnucash-bin.o -pthread -pthread
> >  -Wl,--export-dynamic -pthread
> >  -pthread  ../../src/libqof/qof/.libs/libgnc-qof.so
> ../../src/core-utils/.libs/libgnc-core-utils.so
> ../../src/engine/.libs/libgncmod-engine.so
> ../../src/gnome/.libs/libgnc-gnome.so
> ../../src/gnome-utils/.libs/libgncmod-gnome-utils.so
> ../../src/app-utils/.libs/libgncmod-app-utils.so
> ../../src/gnc-module/.libs/libgnc-module.so /usr/lib/libguile.so
> /usr/lib/libgmp.so
> >  -lcrypt /usr/lib/libltdl.so /usr/lib/libgnomeui-2.so /usr/lib/libSM.so
> /usr/lib/libICE.so /usr/lib/libbonoboui-2.so /usr/lib/libgnomevfs-2.so
> /usr/lib/libgnomecanvas-2.so /usr/lib/libgnome-2.so /usr/lib/libpopt.so
> /usr/lib/libbonobo-2.so /usr/lib/libbonobo-activation.so
> /usr/lib/libORBit-2.so /usr/lib/libart_lgpl_2.so /usr/lib/libgconf-2.so
> /usr/lib/libgtk-x11-2.0.so /usr/lib/libgdk-x11-2.0.so /usr/lib/
> libatk-1.0.so /usr/lib/libgio-2.0.so /usr/lib/libpangoft2-1.0.so /usr/lib/
> libpangocairo-1.0.so /usr/lib/libgdk_pixbuf-2.0.so /usr/lib/libcairo.so
> /usr/lib/libpango-1.0.so /usr/lib/libfreetype.so /usr/lib/libfontconfig.so
> /usr/lib/libgobject-2.0.so /usr/lib/libgmodule-2.0.so /usr/lib/
> libgthread-2.0.so
> >  -lrt /usr/lib/libglib-2.0.so -lm -pthread -Wl,-rpath
> >  -Wl,/usr/lib/gnucash /usr/lib/gnucash/libgncmod-report-gnome.so:
> >  undefined reference to
> >  `gnc_html_export' /usr/lib/gnucash/libgncmod-report-gnome.so:
> >  undefined reference to
> >  `gnc_html_copy' /usr/lib/gnucash/libgncmod-report-gnome.so: undefined
> >  reference to `gnc_html_new' collect2: ld returned 1 exit status
> >  make[4]: *** [gnucash] Error 1 make[4]: Leaving directory
> >  `/tmp/SBo/gnucash-2.4.5/src/bin' make[3]: *** [all-recursive] Error 1
> >  make[3]: Leaving directory `/tmp/SBo/gnucash-2.4.5/src/bin' make[2]:
> >  *** [all-recursive] Error 1 make[2]: Leaving directory
> >  `/tmp/SBo/gnucash-2.4.5/src' make[1]: *** [all-recursive] Error 1
> >  make[1]: Leaving directory `/tmp/SBo/gnucash-2.4.5' make: *** [all]
> >
> >
> >
> >
> >  Error 2 gnucash: Would you like to continue processing the rest of the
> >  build queue or would you like to abort?  If this failed package is a
> >  dependency of another package in the queue then it may not make sense
> >  to continue. (Y)es to continue, (N)o to abort, (R)etry the build?:
> >  README                     gnucash-2.4.5.tar.bz2
> >  gnucash.SlackBuild.build   gnucash.info
> >  gnucash.info.sbopkg doinst.sh
> >  gnucash.SlackBuild         gnucash.SlackBuild.sbopkg
> >  gnucash.info.build         slack-desc
> >
> >
> >  James Gilmour.
> > _______________________________________________
> > SlackBuilds-users mailing list
> > SlackBuilds-users at slackbuilds.org
> > http://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> > Archives - http://lists.slackbuilds.org/pipermail/slackbuilds-users/
> > FAQ - http://slackbuilds.org/faq/
> >
> >
>
>
>
> --
> Ozan, BSc, BEng
> _______________________________________________
> SlackBuilds-users mailing list
> SlackBuilds-users at slackbuilds.org
> http://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> Archives - http://lists.slackbuilds.org/pipermail/slackbuilds-users/
> FAQ - http://slackbuilds.org/faq/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.slackbuilds.org/pipermail/slackbuilds-users/attachments/20110808/a605f3b6/attachment.html>