From duncan_roe at optusnet.com.au Tue Jan 1 20:31:09 2019 From: duncan_roe at optusnet.com.au (Duncan Roe) Date: Wed, 2 Jan 2019 07:31:09 +1100 Subject: [Slackbuilds-users] Type1_to_OTF and afdko slackbuilds In-Reply-To: <20190101175309.73ea182c@bigboy.example.net> References: <20190101175309.73ea182c@bigboy.example.net> Message-ID: <20190101203109.GA2255@dimstar.local.net> Hi Hazel, On Tue, Jan 01, 2019 at 05:53:09PM +0000, Hazel Russman wrote: > Dear Mr Roe > > I find that I cannot run your Type1_to_OTF slackbuild as is, because it > fails to find the makeotf command from afdko, since this is in /opt and off > the usual command path. > > If I reset the path with PATH=/opt/afdko/Tools/linux:$PATH as a new > environmental variable for the slackbuild, then it works. Like many SlackBuilds, afdko creates .sh and .csh files in /etc/profile.d to add /opt/afdko/Tools/linux to $PATH. The usual advice is to reboot, but it's fine to only log out and in again, or source the new file which would update the PATH much as you did. Some SlackBuilds put a symbolic link in /usr/bin instead. Perhaps that is a better approach: I'm copying the List for any feedback someone might have. > > I'm attaching two build logs. The first is without the path adjustment and > the second with it. Your second log is a complete mystery to me. The first file, 'c0648bt_.pfb' is provided by the Slackware 14.2 package 'font-bitstream-type1-1.0.3-noarch-1'. Did you install that? The file should be at '/usr/share/fonts/Type1/c0648bt_.pfb'. Similarly, 'courb.pfa' is in package 'font-bitstream-type1-1.0.3-noarch-1'. Are these packages in your /var/log/packages? May be worth a re-install if so, install if not. Let me know if you still have a problem, Cheers ... Duncan. > > -- > Hazel Russman > ./makeotf.sh: line 2: makeotf: command not found > ./makeotf.sh: line 3: makeotf: command not found > ./makeotf.sh: line 4: makeotf: command not found > ./makeotf.sh: line 5: makeotf: command not found > ./makeotf.sh: line 6: makeotf: command not found > ./makeotf.sh: line 7: makeotf: command not found > ./makeotf.sh: line 8: makeotf: command not found > ./makeotf.sh: line 9: makeotf: command not found > ./makeotf.sh: line 10: makeotf: command not found > ./makeotf.sh: line 11: makeotf: command not found > ./makeotf.sh: line 12: makeotf: command not found > ./makeotf.sh: line 13: makeotf: command not found > ./makeotf.sh: line 14: makeotf: command not found > ./makeotf.sh: line 15: makeotf: command not found > ./makeotf.sh: line 16: makeotf: command not found > ./makeotf.sh: line 17: makeotf: command not found > ./makeotf.sh: line 18: makeotf: command not found > ./makeotf.sh: line 19: makeotf: command not found > ./makeotf.sh: line 20: makeotf: command not found > ./makeotf.sh: line 21: makeotf: command not found > ./makeotf.sh: line 22: makeotf: command not found > ./makeotf.sh: line 23: makeotf: command not found > ./makeotf.sh: line 24: makeotf: command not found > ./makeotf.sh: line 25: makeotf: command not found > ./makeotf.sh: line 26: makeotf: command not found > ./makeotf.sh: line 27: makeotf: command not found > ./makeotf.sh: line 28: makeotf: command not found > ./makeotf.sh: line 29: makeotf: command not found > ./makeotf.sh: line 30: makeotf: command not found > ./makeotf.sh: line 31: makeotf: command not found > ./makeotf.sh: line 32: makeotf: command not found > ./makeotf.sh: line 33: makeotf: command not found > ./makeotf.sh: line 34: makeotf: command not found > ./makeotf.sh: line 35: makeotf: command not found > ./makeotf.sh: line 36: makeotf: command not found > ./makeotf.sh: line 37: makeotf: command not found > ./makeotf.sh: line 38: makeotf: command not found > ./makeotf.sh: line 39: makeotf: command not found > ./makeotf.sh: line 40: makeotf: command not found > ./makeotf.sh: line 41: makeotf: command not found > > makeotf [Error] Could not find the input font file at 'c0648bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'c0632bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'c0633bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'c0649bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'cour.pfa'. > > makeotf [Error] Could not find the input font file at 'courb.pfa'. > > makeotf [Error] Could not find the input font file at 'courbi.pfa'. > > makeotf [Error] Could not find the input font file at 'couri.pfa'. > > makeotf [Error] Could not find the input font file at 'c0419bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'c0583bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'c0611bt_.pfb'. > > makeotf [Error] Could not find the input font file at 'c0582bt_.pfb'. > > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "UTRG____.pfa" "-o" "Utopia-Regular.otf" -mf "FontMenuNameDB" -shw > makeotfexe [NOTE] Wrote new font file 'Utopia-Regular.otf'. > > Built development mode font 'Utopia-Regular.otf'. > Done. > > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "UTB_____.pfa" "-o" "Utopia-Bold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [NOTE] Wrote new font file 'Utopia-Bold.otf'. > > Built development mode font 'Utopia-Bold.otf'. > Done. > > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "UTBI____.pfa" "-o" "Utopia-BoldItalic.otf" -i -b -mf "FontMenuNameDB" -shw > makeotfexe [NOTE] Wrote new font file 'Utopia-BoldItalic.otf'. > > Built development mode font 'Utopia-BoldItalic.otf'. > Done. > > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "UTI_____.pfa" "-o" "Utopia-Italic.otf" -i -mf "FontMenuNameDB" -shw > makeotfexe [NOTE] Wrote new font file 'Utopia-Italic.otf'. > > Built development mode font 'Utopia-Italic.otf'. > Done. > > makeotf [Warning] Font at 'c059013l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'c059013l.pfb' to temporary Unix Type1 font file 'c059013l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "c059013l.pfb.tmp" "-o" "CenturySchL-Roma.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'CenturySchL-Roma.otf'. > > Built development mode font 'CenturySchL-Roma.otf'. > Done. > > makeotf [Warning] Font at 'c059016l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'c059016l.pfb' to temporary Unix Type1 font file 'c059016l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "c059016l.pfb.tmp" "-o" "CenturySchL-Bold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'CenturySchL-Bold.otf'. > > Built development mode font 'CenturySchL-Bold.otf'. > Done. > > makeotf [Warning] Font at 'c059036l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'c059036l.pfb' to temporary Unix Type1 font file 'c059036l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "c059036l.pfb.tmp" "-o" "CenturySchL-BoldItal.otf" -i -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'CenturySchL-BoldItal.otf'. > > Built development mode font 'CenturySchL-BoldItal.otf'. > Done. > > makeotf [Warning] Font at 'c059033l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'c059033l.pfb' to temporary Unix Type1 font file 'c059033l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "c059033l.pfb.tmp" "-o" "CenturySchL-Ital.otf" -i -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'CenturySchL-Ital.otf'. > > Built development mode font 'CenturySchL-Ital.otf'. > Done. > > makeotf [Warning] Font at 'a010013l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10022, uni0400, uni04D0, uni04D2, uni04D6, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'a010013l.pfb' to temporary Unix Type1 font file 'a010013l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "a010013l.pfb.tmp" "-o" "URWGothicL-Book.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWGothicL-Book.otf'. > > Built development mode font 'URWGothicL-Book.otf'. > Done. > > makeotf [Warning] Font at 'a010015l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'a010015l.pfb' to temporary Unix Type1 font file 'a010015l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "a010015l.pfb.tmp" "-o" "URWGothicL-Demi.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWGothicL-Demi.otf'. > > Built development mode font 'URWGothicL-Demi.otf'. > Done. > > makeotf [Warning] Font at 'c059013l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'c059013l.pfb' to temporary Unix Type1 font file 'c059013l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "c059013l.pfb.tmp" "-o" "CenturySchL-Roma.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'CenturySchL-Roma.otf'. > > Built development mode font 'CenturySchL-Roma.otf'. > Done. > > makeotf [Warning] Font at 'c059016l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'c059016l.pfb' to temporary Unix Type1 font file 'c059016l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "c059016l.pfb.tmp" "-o" "CenturySchL-Bold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'CenturySchL-Bold.otf'. > > Built development mode font 'CenturySchL-Bold.otf'. > Done. > > makeotf [Warning] Font at 'b018012l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10022, afii10023, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10070, afii10071, afii10080, afii10083, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni04A8, uni04A9, uni04AA, uni04AB, uni04AE, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D4, uni04D5, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'b018012l.pfb' to temporary Unix Type1 font file 'b018012l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "b018012l.pfb.tmp" "-o" "URWBookmanL-Ligh.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWBookmanL-Ligh.otf'. > > Built development mode font 'URWBookmanL-Ligh.otf'. > Done. > > makeotf [Warning] Font at 'b018015l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10022, afii10023, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10082, afii10083, afii10087, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni04A2, uni04A4, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04AE, uni04B2, uni04B3, uni04BD, uni04BF, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D4, uni04D5, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'b018015l.pfb' to temporary Unix Type1 font file 'b018015l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "b018015l.pfb.tmp" "-o" "URWBookmanL-DemiBold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWBookmanL-DemiBold.otf'. > > Built development mode font 'URWBookmanL-DemiBold.otf'. > Done. > > makeotf [Warning] Font at 'n019003l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10032, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10083, afii10085, afii10087, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04AE, uni04B0, uni04B2, uni04B3, uni04BD, uni04BF, uni04C0, uni04D0, uni04D1, uni04D2, uni04D3, uni04D4, uni04D5, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n019003l.pfb' to temporary Unix Type1 font file 'n019003l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n019003l.pfb.tmp" "-o" "NimbusSanL-Regu.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusSanL-Regu.otf'. > > Built development mode font 'NimbusSanL-Regu.otf'. > Done. > > makeotf [Warning] Font at 'n019004l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10032, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10083, afii10085, afii10087, uni0400, afii10055, afii10056, afii10057, uni0450, afii10103, afii10104, afii10105, afii10110, uni04A2, uni04A4, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04AE, uni04B0, uni04B2, uni04B3, uni04BC, uni04BD, uni04BE, uni04BF, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n019004l.pfb' to temporary Unix Type1 font file 'n019004l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n019004l.pfb.tmp" "-o" "NimbusSanL-Bold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusSanL-Bold.otf'. > > Built development mode font 'NimbusSanL-Bold.otf'. > Done. > > makeotf [Warning] Font at 'n019024l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, IJ, ij, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n019024l.pfb' to temporary Unix Type1 font file 'n019024l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n019024l.pfb.tmp" "-o" "NimbusSanL-BoldItal.otf" -i -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusSanL-BoldItal.otf'. > > Built development mode font 'NimbusSanL-BoldItal.otf'. > Done. > > makeotf [Warning] Font at 'n019023l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10022, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10065, afii10070, afii10080, afii10082, afii10083, afii10085, afii10087, uni0400, afii10055, afii10057, uni0450, afii10103, afii10105, uni04C0, uni04D0, uni04D1, uni04D2, uni04D3, uni04D4, uni04D5, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n019023l.pfb' to temporary Unix Type1 font file 'n019023l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n019023l.pfb.tmp" "-o" "NimbusSanL-ReguItal.otf" -i -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusSanL-ReguItal.otf'. > > Built development mode font 'NimbusSanL-ReguItal.otf'. > Done. > > makeotf [Warning] Font at 'n019043l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n019043l.pfb' to temporary Unix Type1 font file 'n019043l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n019043l.pfb.tmp" "-o" "NimbusSanL-ReguCond.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusSanL-ReguCond.otf'. > > Built development mode font 'NimbusSanL-ReguCond.otf'. > Done. > > makeotf [Warning] Font at 'n019044l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04AE, uni04AF, uni04B0, uni04B1, uni04B2, uni04B3, uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n019044l.pfb' to temporary Unix Type1 font file 'n019044l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n019044l.pfb.tmp" "-o" "NimbusSanL-BoldCond.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusSanL-BoldCond.otf'. > > Built development mode font 'NimbusSanL-BoldCond.otf'. > Done. > > makeotf [Warning] Font at 'n021003l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10022, afii10023, uni0400, afii10054, afii10057, afii10102, afii10103, afii10104, afii10105, uni04AE, uni04D0, uni04D2, uni04D4, uni04D5, uni04D6, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, hcircumflex, itilde, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n021003l.pfb' to temporary Unix Type1 font file 'n021003l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n021003l.pfb.tmp" "-o" "NimbusRomNo9L-Regu.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusRomNo9L-Regu.otf'. > > Built development mode font 'NimbusRomNo9L-Regu.otf'. > Done. > > makeotf [Warning] Font at 'n022003l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > Aacute, Agrave, Acircumflex, Abreve, Atilde, Aring, Ecaron, Edotaccent, Odieresis, Ohungarumlaut, Uhungarumlaut, Amacron, adieresis, aacute, agrave, acircumflex, abreve, atilde, aring, ecaron, edotaccent, ohungarumlaut, uhungarumlaut, amacron, afii10017, afii10019, afii10022, afii10023, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10082, afii10083, afii10085, afii10087, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni04A2, uni04A4, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04B2, uni04B3, uni04BC, uni04BD, uni04BE, uni04BF, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D4, uni04D5, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n022003l.pfb' to temporary Unix Type1 font file 'n022003l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n022003l.pfb.tmp" "-o" "NimbusMonL-Regu.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusMonL-Regu.otf'. > > Built development mode font 'NimbusMonL-Regu.otf'. > Done. > > makeotf [Warning] Font at 'n022004l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10022, afii10023, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10082, afii10083, afii10085, afii10087, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni048E, uni04A2, uni04A4, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04B2, uni04B3, uni04BC, uni04BD, uni04BE, uni04BF, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n022004l.pfb' to temporary Unix Type1 font file 'n022004l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n022004l.pfb.tmp" "-o" "NimbusMonL-Bold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusMonL-Bold.otf'. > > Built development mode font 'NimbusMonL-Bold.otf'. > Done. > > makeotf [Warning] Font at 'n022024l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10022, afii10023, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10082, afii10083, afii10085, afii10087, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni048E, uni048F, uni04A2, uni04A4, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04AE, uni04AF, uni04B0, uni04B1, uni04B2, uni04B3, uni04BC, uni04BD, uni04BE, uni04BF, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D4, uni04D5, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Hbar, hbar, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Tbar, tbar, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n022024l.pfb' to temporary Unix Type1 font file 'n022024l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n022024l.pfb.tmp" "-o" "NimbusMonL-BoldObli.otf" -i -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusMonL-BoldObli.otf'. > > Built development mode font 'NimbusMonL-BoldObli.otf'. > Done. > > makeotf [Warning] Font at 'n022023l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > afii10017, afii10019, afii10022, afii10023, afii10030, afii10031, afii10032, afii10034, afii10035, afii10036, afii10039, afii10065, afii10070, afii10071, afii10080, afii10082, afii10083, afii10085, afii10087, uni0400, afii10054, afii10055, afii10056, afii10057, uni0450, afii10102, afii10103, afii10104, afii10105, afii10110, uni04A2, uni04A4, uni04A8, uni04A9, uni04AA, uni04AB, uni04AC, uni04AE, uni04AF, uni04B1, uni04B2, uni04B3, uni04BC, uni04BD, uni04BE, uni04BF, uni04C0, uni04C7, uni04D0, uni04D1, uni04D2, uni04D3, uni04D6, uni04D7, uni04E6, uni04E7, uni04EF, uni04F1, uni04F3, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, napostrophe, Eng, eng, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'n022023l.pfb' to temporary Unix Type1 font file 'n022023l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "n022023l.pfb.tmp" "-o" "NimbusMonL-ReguObli.otf" -i -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'NimbusMonL-ReguObli.otf'. > > Built development mode font 'NimbusMonL-ReguObli.otf'. > Done. > > makeotf [Warning] Font at 'p052003l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'p052003l.pfb' to temporary Unix Type1 font file 'p052003l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "p052003l.pfb.tmp" "-o" "URWPalladioL-Roma.otf" -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWPalladioL-Roma.otf'. > > Built development mode font 'URWPalladioL-Roma.otf'. > Done. > > makeotf [Warning] Font at 'p052004l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04C0, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'p052004l.pfb' to temporary Unix Type1 font file 'p052004l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "p052004l.pfb.tmp" "-o" "URWPalladioL-Bold.otf" -b -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWPalladioL-Bold.otf'. > > Built development mode font 'URWPalladioL-Bold.otf'. > Done. > > makeotf [Warning] Font at 'z003034l.pfb' contains deprecated SEAC operator. These composite glyphs will be decomposed by makeOTF: > uni04D4, uni04D5, Ccircumflex, ccircumflex, Cdotaccent, cdotaccent, Ebreve, ebreve, Gcircumflex, gcircumflex, Gdotaccent, gdotaccent, Hcircumflex, hcircumflex, Itilde, itilde, Ibreve, ibreve, Jcircumflex, Ldot, Obreve, obreve, Scircumflex, scircumflex, uni0162, uni0163, Utilde, utilde, Ubreve, ubreve, Wcircumflex, wcircumflex, Ycircumflex, ycircumflex > makeotf [Note] Converting source font 'z003034l.pfb' to temporary Unix Type1 font file 'z003034l.pfb.tmp'. > makeotf [Warning] Could not find default features file at 'None'. Font will be built without any layout features. > makeotf [Note] Writing options file ./current.fpr > makeotf [Note] Running makeotfexe with commands: > cd "/tmp/SBo/Type1_to_OTF-1.0" > makeotfexe "-f" "z003034l.pfb.tmp" "-o" "URWChanceryL-MediItal.otf" -i -mf "FontMenuNameDB" -shw > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [WARNING] glyph not encoded in Unicode cmap: overridden by uni glyph(s) > makeotfexe [NOTE] Wrote new font file 'URWChanceryL-MediItal.otf'. > > Built development mode font 'URWChanceryL-MediItal.otf'. > Done. > > Slackware package maker, version 3.141593. > > Searching for symbolic links: > > No symbolic links were found, so we won't make an installation script. > You can make your own later in ./install/doinst.sh and rebuild the > package if you like. > > This next step is optional - you can set the directories in your package > to some sane permissions. If any of the directories in your package have > special permissions, then DO NOT reset them here! > > Would you like to reset all directory permissions to 755 (drwxr-xr-x) and > directory ownerships to root.root ([y]es, [n]o)? n > > Creating Slackware package: /tmp/Type1_to_OTF-1.0-noarch-1_SBo.tgz > > ./ > usr/ > usr/doc/ > usr/doc/Type1_to_OTF-1.0/ > usr/doc/Type1_to_OTF-1.0/README.md > usr/doc/Type1_to_OTF-1.0/LICENSE > usr/doc/Type1_to_OTF-1.0/Type1_to_OTF.SlackBuild > usr/share/ > usr/share/fonts/ > usr/share/fonts/OTF/ > usr/share/fonts/OTF/NimbusSanL-Regu.otf > usr/share/fonts/OTF/URWBookmanL-DemiBold.otf > usr/share/fonts/OTF/CenturySchL-Ital.otf > usr/share/fonts/OTF/URWGothicL-Book.otf > usr/share/fonts/OTF/NimbusSanL-BoldCond.otf > usr/share/fonts/OTF/URWBookmanL-Ligh.otf > usr/share/fonts/OTF/NimbusMonL-ReguObli.otf > usr/share/fonts/OTF/URWPalladioL-Roma.otf > usr/share/fonts/OTF/NimbusMonL-Regu.otf > usr/share/fonts/OTF/URWPalladioL-Bold.otf > usr/share/fonts/OTF/NimbusSanL-BoldItal.otf > usr/share/fonts/OTF/Utopia-Regular.otf > usr/share/fonts/OTF/NimbusMonL-Bold.otf > usr/share/fonts/OTF/CenturySchL-Bold.otf > usr/share/fonts/OTF/CenturySchL-BoldItal.otf > usr/share/fonts/OTF/NimbusRomNo9L-Regu.otf > usr/share/fonts/OTF/Utopia-Bold.otf > usr/share/fonts/OTF/URWGothicL-Demi.otf > usr/share/fonts/OTF/NimbusSanL-Bold.otf > usr/share/fonts/OTF/URWChanceryL-MediItal.otf > usr/share/fonts/OTF/Utopia-BoldItalic.otf > usr/share/fonts/OTF/NimbusSanL-ReguItal.otf > usr/share/fonts/OTF/Utopia-Italic.otf > usr/share/fonts/OTF/NimbusSanL-ReguCond.otf > usr/share/fonts/OTF/NimbusMonL-BoldObli.otf > usr/share/fonts/OTF/CenturySchL-Roma.otf > install/ > install/doinst.sh > install/slack-desc > > Slackware package /tmp/Type1_to_OTF-1.0-noarch-1_SBo.tgz created. > -- Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html From slackbuilds at jaxartes.net Wed Jan 2 04:24:04 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Tue, 01 Jan 2019 20:24:04 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat Message-ID: <1987281.807BjAPioq@wintermute.sprawl.net> Hello users of Newsbeuter, the first half of this email is for your eyes only. Everyone else may skip to the third paragraph. If you are using Newsbeuter, I strongly recommend that you migrate over to the Newsboat fork (https://newsboat.org) as soon as possible. Newsbeuter is unmaintained and there is at least one remote execution vulnerability, which was fixed in Newsboat. I will be having Newsbeuter removed from the SBo repository soon so now you have two reasons to migrate. For Newsboat users, there is a new version out 2.14 that introduces a Rust dependency, but there's probably not going to be a SlackBuild update for a while yet because some fairly major reworking is needed to ensure that it builds without an internet connection. There are 20-odd new source files that will need downloading and integrating into the script so it's a non-trivial amount of work. Which leads me to my question: does anyone want to take over as the Newsboat maintainer? Apply only if you are actually planning to version bump the script to the latest release with full Rust support. Simply making yourself maintainer of the existing 2.13 won't cut it; you become maintainer with 2.14 or not at all :) Ben From chytraeu at sdf.org Wed Jan 2 05:04:04 2019 From: chytraeu at sdf.org (Donald Cooley) Date: Tue, 1 Jan 2019 23:04:04 -0600 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <1987281.807BjAPioq@wintermute.sprawl.net> References: <1987281.807BjAPioq@wintermute.sprawl.net> Message-ID: On 1/1/19 10:24 PM, Benjamin Trigona-Harany wrote: > Hello users of Newsbeuter, the first half of this email is for your eyes only. > Everyone else may skip to the third paragraph. > > If you are using Newsbeuter, I strongly recommend that you migrate over to the > Newsboat fork (https://newsboat.org) as soon as possible. Newsbeuter is > unmaintained and there is at least one remote execution vulnerability, which > was fixed in Newsboat. I will be having Newsbeuter removed from the SBo > repository soon so now you have two reasons to migrate. > > For Newsboat users, there is a new version out 2.14 that introduces a Rust > dependency, but there's probably not going to be a SlackBuild update for a > while yet because some fairly major reworking is needed to ensure that it > builds without an internet connection. There are 20-odd new source files that > will need downloading and integrating into the script so it's a non-trivial > amount of work. > > Which leads me to my question: does anyone want to take over as the Newsboat > maintainer? Apply only if you are actually planning to version bump the script > to the latest release with full Rust support. Simply making yourself > maintainer of the existing 2.13 won't cut it; you become maintainer with 2.14 > or not at all :) > > Ben > > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > I'll take it over if that's alright -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: OpenPGP digital signature URL: From slackbuilds at jaxartes.net Wed Jan 2 18:01:06 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Wed, 2 Jan 2019 10:01:06 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: References: <1987281.807BjAPioq@wintermute.sprawl.net> Message-ID: <7ff51950-d3bb-29e5-ccbd-e55808e5664e@jaxartes.net> On 2019-01-01 9:04 p.m., Donald Cooley wrote: > On 1/1/19 10:24 PM, Benjamin Trigona-Harany wrote: >> Which leads me to my question: does anyone want to take over as the Newsboat >> maintainer? Apply only if you are actually planning to version bump the script >> to the latest release with full Rust support. Simply making yourself >> maintainer of the existing 2.13 won't cut it; you become maintainer with 2.14 >> or not at all :) >> > > I'll take it over if that's alright It's yours with the update to 2.14! From chytraeu at sdf.org Thu Jan 3 01:42:06 2019 From: chytraeu at sdf.org (Donald Cooley) Date: Wed, 2 Jan 2019 19:42:06 -0600 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <7ff51950-d3bb-29e5-ccbd-e55808e5664e@jaxartes.net> References: <1987281.807BjAPioq@wintermute.sprawl.net> <7ff51950-d3bb-29e5-ccbd-e55808e5664e@jaxartes.net> Message-ID: On 1/2/19 12:01 PM, Benjamin Trigona-Harany wrote: > On 2019-01-01 9:04 p.m., Donald Cooley wrote: >> On 1/1/19 10:24 PM, Benjamin Trigona-Harany wrote: >>> Which leads me to my question: does anyone want to take over as the >>> Newsboat >>> maintainer? Apply only if you are actually planning to version bump >>> the script >>> to the latest release with full Rust support. Simply making yourself >>> maintainer of the existing 2.13 won't cut it; you become maintainer >>> with 2.14 >>> or not at all :) >>> >> >> I'll take it over if that's alright > > It's yours with the update to 2.14! > Sorry, after taking a hard look at this I'm not that much of a masochist. Someone else can have this. From dave at tty1.uk Thu Jan 3 02:09:01 2019 From: dave at tty1.uk (Dave Woodfall) Date: Thu, 3 Jan 2019 02:09:01 +0000 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <1987281.807BjAPioq@wintermute.sprawl.net> References: <1987281.807BjAPioq@wintermute.sprawl.net> Message-ID: <20190103020901.GU13219@blackswan.r0t.uk> On Tuesday 1 January 2019 20:24, Benjamin Trigona-Harany put forth the proposition: > Hello users of Newsbeuter, the first half of this email is for your eyes only. > Everyone else may skip to the third paragraph. > I use newsbuter and found that debian have 23 patches in all for version 2.9.5: https://packages.debian.org/source/stable/newsbeuter 2.9.8 has 25: https://packages.debian.org/source/testing/newsbeuter Couldn't we use these rather than mess about with rust? > If you are using Newsbeuter, I strongly recommend that you migrate over to the > Newsboat fork (https://newsboat.org) as soon as possible. Newsbeuter is > unmaintained and there is at least one remote execution vulnerability, which > was fixed in Newsboat. I will be having Newsbeuter removed from the SBo > repository soon so now you have two reasons to migrate. > > For Newsboat users, there is a new version out 2.14 that introduces a Rust > dependency, but there's probably not going to be a SlackBuild update for a > while yet because some fairly major reworking is needed to ensure that it > builds without an internet connection. There are 20-odd new source files that > will need downloading and integrating into the script so it's a non-trivial > amount of work. > > Which leads me to my question: does anyone want to take over as the Newsboat > maintainer? Apply only if you are actually planning to version bump the script > to the latest release with full Rust support. Simply making yourself > maintainer of the existing 2.13 won't cut it; you become maintainer with 2.14 > or not at all :) > > Ben -- There are three kinds of lies: Lies, Damn Lies, and Statistics. -- Disraeli -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From slackbuilds at jaxartes.net Thu Jan 3 02:52:35 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Wed, 02 Jan 2019 18:52:35 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103020901.GU13219@blackswan.r0t.uk> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> Message-ID: <3056569.6QcBKmMV9D@wintermute.sprawl.net> On Wednesday, 2 January 2019 18:09:01 PST Dave Woodfall wrote: > On Tuesday 1 January 2019 20:24, > > Benjamin Trigona-Harany put forth the proposition: > > Hello users of Newsbeuter, the first half of this email is for your eyes > > only. Everyone else may skip to the third paragraph. > > I use newsbuter and found that debian have 23 patches in all for > version 2.9.5: > > https://packages.debian.org/source/stable/newsbeuter > > 2.9.8 has 25: > > https://packages.debian.org/source/testing/newsbeuter > > Couldn't we use these rather than mess about with rust? My existing Newsbeuter SlackBuild should have all the same security patches as Debian. Those patches were all contributed by Alexander, the current maintainer of Newsboat, back when he was working on Newsbeuter. Unfortunately, he was not given the required permissions to properly release a new version with his fixes and made the decision to fork the project instead (it was all on the Newsbeuter maillist a couple of years ago). I doubt that you'll see any further security patches for Newsbeuter from him or anyone else; the community has moved on to Newsboat, whose only flaw seems to be its objectively worse name. Incidentally, there's also no pressing need to move to Newsboat 2.14 and its new Rust dependency. I'm just opening the door a crack in case there's someone who wants to make it happen sooner than later. Ben From dave at tty1.uk Thu Jan 3 03:06:05 2019 From: dave at tty1.uk (Dave Woodfall) Date: Thu, 3 Jan 2019 03:06:05 +0000 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <3056569.6QcBKmMV9D@wintermute.sprawl.net> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> Message-ID: <20190103030605.GV13219@blackswan.r0t.uk> On Wednesday 2 January 2019 18:52, Benjamin Trigona-Harany put forth the proposition: > On Wednesday, 2 January 2019 18:09:01 PST Dave Woodfall wrote: > > On Tuesday 1 January 2019 20:24, > > > > Benjamin Trigona-Harany put forth the > proposition: > > > Hello users of Newsbeuter, the first half of this email is for your eyes > > > only. Everyone else may skip to the third paragraph. > > > > I use newsbuter and found that debian have 23 patches in all for > > version 2.9.5: > > > > https://packages.debian.org/source/stable/newsbeuter > > > > 2.9.8 has 25: > > > > https://packages.debian.org/source/testing/newsbeuter > > > > Couldn't we use these rather than mess about with rust? > > My existing Newsbeuter SlackBuild should have all the same security patches as > Debian. Those patches were all contributed by Alexander, the current > maintainer of Newsboat, back when he was working on Newsbeuter. Unfortunately, > he was not given the required permissions to properly release a new version > with his fixes and made the decision to fork the project instead (it was all > on the Newsbeuter maillist a couple of years ago). > > I doubt that you'll see any further security patches for Newsbeuter from him > or anyone else; the community has moved on to Newsboat, whose only flaw seems > to be its objectively worse name. > > Incidentally, there's also no pressing need to move to Newsboat 2.14 and its > new Rust dependency. I'm just opening the door a crack in case there's someone > who wants to make it happen sooner than later. > > Ben I'll take it over then and see what I can do with it. Cheers -- Real programmers don't draw flowcharts. Flowcharts are, after all, the illiterate's form of documentation. Cavemen drew flowcharts; look how much good it did them. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From dickson.tim at googlemail.com Thu Jan 3 16:31:55 2019 From: dickson.tim at googlemail.com (Tim Dickson) Date: Thu, 3 Jan 2019 16:31:55 +0000 Subject: [Slackbuilds-users] OpenBLAS issue Message-ID: openBLAS slackbuild is failing to complete. it bombs out with the following message. ar: sgemm_kernel.o: No such file or directory ../Makefile.tail:40: recipe for target 'libs' failed make[1]: *** [libs] Error 1 make[1]: Leaving directory '/tmp/SBo/OpenBLAS-0.3.3/kernel' Makefile:145: recipe for target 'libs' failed make: *** [libs] Error 1 Any ideas.? it has no deps, and I'm running on fully a patched slackware64 14.2 vm thanks, Tim On a side note, how do folks handle the dependency recursion of ffmpeg which has an optional dependency of frie0r which has an optional dependency of opencv which has an optional dependency of ffmpeg ? From slackbuilds at jaxartes.net Thu Jan 3 18:04:41 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Thu, 3 Jan 2019 10:04:41 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103030605.GV13219@blackswan.r0t.uk> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> Message-ID: <9f744d51-2037-ff66-1b82-cd13af4adffd@jaxartes.net> On 2019-01-02 7:06 p.m., Dave Woodfall wrote: >> Incidentally, there's also no pressing need to move to Newsboat 2.14 and its >> new Rust dependency. I'm just opening the door a crack in case there's someone >> who wants to make it happen sooner than later. >> >> Ben > > I'll take it over then and see what I can do with it. Looking forward to the new Rustified SlackBuild then! From dave at tty1.uk Thu Jan 3 18:12:28 2019 From: dave at tty1.uk (Dave Woodfall) Date: Thu, 3 Jan 2019 18:12:28 +0000 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <9f744d51-2037-ff66-1b82-cd13af4adffd@jaxartes.net> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <9f744d51-2037-ff66-1b82-cd13af4adffd@jaxartes.net> Message-ID: <20190103181228.GA2840@blackswan.r0t.uk> On Thursday 3 January 2019 10:04, Benjamin Trigona-Harany put forth the proposition: > On 2019-01-02 7:06 p.m., Dave Woodfall wrote: > > > Incidentally, there's also no pressing need to move to Newsboat 2.14 and its > > > new Rust dependency. I'm just opening the door a crack in case there's someone > > > who wants to make it happen sooner than later. > > > > > > Ben > > > > I'll take it over then and see what I can do with it. > > Looking forward to the new Rustified SlackBuild then! I'm wondering about newsbeuter though - if the Debian patches work and there are no other vulnerabilities at the moment I'd rather see that continue, at least for as long as Debian keep it alive. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From slackbuilds at jaxartes.net Thu Jan 3 18:33:25 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Thu, 3 Jan 2019 10:33:25 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103181228.GA2840@blackswan.r0t.uk> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <9f744d51-2037-ff66-1b82-cd13af4adffd@jaxartes.net> <20190103181228.GA2840@blackswan.r0t.uk> Message-ID: On 2019-01-03 10:12 a.m., Dave Woodfall wrote: > On Thursday 3 January 2019 10:04, > Benjamin Trigona-Harany put forth the proposition: >> On 2019-01-02 7:06 p.m., Dave Woodfall wrote: >>>> Incidentally, there's also no pressing need to move to Newsboat 2.14 and its >>>> new Rust dependency. I'm just opening the door a crack in case there's someone >>>> who wants to make it happen sooner than later. >>>> >>>> Ben >>> >>> I'll take it over then and see what I can do with it. >> >> Looking forward to the new Rustified SlackBuild then! > > I'm wondering about newsbeuter though - if the Debian patches work > and there are no other vulnerabilities at the moment I'd rather see > that continue, at least for as long as Debian keep it alive. I think the better way of framing it is that there are no *known* vulnerabilities in since no developers are looking at it any more. There are no Debian patches incidentally; they - like my SlackBuild - are using old upstream patches to Newsbeuter master, but those contributions ceased as soon as the project was forked. Finally, Newsbeuter will not build on current and therefore 15.0 when that is released because the code base is not compatible with json-c 0.13 (resolved in Newsboat). I continue to encourage migrating to the active project. Ben From aclemons at runbox.no Thu Jan 3 18:38:10 2019 From: aclemons at runbox.no (Andrew Clemons) Date: Fri, 4 Jan 2019 07:38:10 +1300 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103030605.GV13219@blackswan.r0t.uk> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> Message-ID: <20190103183805.GA16108@runbox.no> On 2019-01-03 03:06:05 +0000, dave at tty1.uk wrote: > [...] > > Incidentally, there's also no pressing need to move to Newsboat 2.14 and its > > new Rust dependency. I'm just opening the door a crack in case there's someone > > who wants to make it happen sooner than later. > > > > Ben > > I'll take it over then and see what I can do with it. I have it working here, so this might help. See attached. I'm also happy to maintain otherwise. Cheers, Andrew -------------- next part -------------- #!/bin/sh # Slackware build script for newsboat # Copyright 2017-2018 Benjamin Trigona-Harany # Copyright 2019 Andrew Clemons, Wellington New Zealand # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=newsboat VERSION=${VERSION:-2.14} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) ARCH=i586 ;; arm*) ARCH=arm ;; *) ARCH=$( uname -m ) ;; esac if [ "$ARCH" = "i586" ]; then if rustc -Vv | grep host | grep i686 > /dev/null ; then ARCH=i686 fi fi fi CWD=$(pwd) TMP=${TMP:-/tmp/SBo} PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} if [ "$ARCH" = "i586" ]; then SLKCFLAGS="-O2 -march=i586 -mtune=i686" LIBDIRSUFFIX="" CARGOTARGET="--target i586-unknown-linux-gnu" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" LIBDIRSUFFIX="" CARGOTARGET="--target i686-unknown-linux-gnu" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" CARGOTARGET="--target x86_64-unknown-linux-gnu" else SLKCFLAGS="-O2" LIBDIRSUFFIX="" CARGOTARGET="" fi set -e rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP rm -rf $PRGNAM-$VERSION tar xvf $CWD/$PRGNAM-$VERSION.tar.xz cd $PRGNAM-$VERSION # build offline # configuration tells cargo to use the configured directory # for dependencies intead of downloading from crates.io mkdir .cargo cat << EOF >> .cargo/config [source.crates-io] registry = 'https://github.com/rust-lang/crates.io-index' replace-with = 'vendored-sources' [source.vendored-sources] directory = '$(pwd)/vendor' EOF # deps and versions come from Cargo.lock mkdir vendor ( cd vendor grep -h -A 3 "\[\[package\]\]" $(find ../ -maxdepth 1 -mindepth 1 -name Cargo.lock | tr '\n' ' ') | \ sed 's/[[:space:]]*=[[:space:]]*/=/g;s/^--//;s/^\[\[/--\n[[/' | \ awk 'BEGIN { RS = "--\n" ; FS="\n" } { print $2, $3, $4 }' | sed 's/"//g;s/name=//;s/ version=/=/' | \ grep crates\.io-index | sed 's/ source=.*$//' | sort -u | while read -r dep ; do ver="$(printf "%s\n" "$dep" | cut -d= -f2)" dep="$(printf "%s\n" "$dep" | cut -d= -f1)" tar xvf $CWD/$dep-$ver.crate touch $dep-$ver/.cargo-ok # generate checksum { printf "{\n" printf ' "files": {\n' ( cd $dep-$ver find . -type f -print0 | xargs -0 sha256sum | sed -n '/\.cargo-checksum\.json/!p' | sed 's/\.\///;s/^\([^ ]*\)[[:space:]][[:space:]]*\(.*\)$/"\2":"\1",/' ) | sed '$ s/,$//' printf " },\n" printf ' "package": "' sha256sum "$CWD/$dep-$ver.crate" | cut -f1 -d' ' | sed 's/$/"/' printf "}\n" } | python -c "import sys, json; data = sys.stdin.read(); print json.dumps(json.loads(data), sort_keys=True, indent=4, separators=(',', ' : '))" > $dep-$ver/.cargo-checksum.json done ) chown -R root:root . find -L . \ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ -o -perm 511 \) -exec chmod 755 {} \; -o \ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; if [ "$CARGOTARGET" != "" ] ; then RELEASEDIR="$(echo "$CARGOTARGET" | cut -d' ' -f2)" sed -i "s|target/release|target/$RELEASEDIR/release|" Makefile fi CXXFLAGS="$SLKCFLAGS" \ CARGO_FLAGS="$CARGOTARGET" \ make -j1 prefix=/usr make doc make install \ prefix=/usr \ docdir=/usr/doc/$PRGNAM-$VERSION \ mandir=/usr/man \ DESTDIR=$PKG find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true find $PKG/usr/man -type f -exec gzip -9 {} \; cp -a \ CHANGELOG.md LICENSE README.md TODO \ $PKG/usr/doc/$PRGNAM-$VERSION cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} -------------- next part -------------- PRGNAM="newsboat" VERSION="2.14" HOMEPAGE="https://www.newsboat.org/" DOWNLOAD="https://newsboat.org/releases/2.14/newsboat-2.14.tar.xz \ https://crates-io.s3-us-west-1.amazonaws.com/crates/aho-corasick/aho-corasick-0.6.9.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/argon2rs/argon2rs-0.2.5.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/arrayvec/arrayvec-0.4.9.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/autocfg/autocfg-0.1.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/backtrace-sys/backtrace-sys-0.1.26.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/backtrace/backtrace-0.3.13.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/bitflags/bitflags-1.0.4.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/blake2-rfc/blake2-rfc-0.2.18.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/cc/cc-1.0.26.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/cfg-if/cfg-if-0.1.6.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/chrono/chrono-0.4.6.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/cloudabi/cloudabi-0.0.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/constant_time_eq/constant_time_eq-0.1.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/dirs/dirs-1.0.4.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/failure/failure-0.1.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/failure_derive/failure_derive-0.1.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/fuchsia-zircon-sys/fuchsia-zircon-sys-0.3.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/fuchsia-zircon/fuchsia-zircon-0.3.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/idna/idna-0.1.5.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/lazy_static/lazy_static-1.2.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/libc/libc-0.2.45.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/lock_api/lock_api-0.1.5.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/matches/matches-0.1.8.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/memchr/memchr-2.1.2.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/nodrop/nodrop-0.1.13.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/num-integer/num-integer-0.1.39.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/num-traits/num-traits-0.2.6.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/once_cell/once_cell-0.1.6.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/parking_lot/parking_lot-0.6.4.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/parking_lot_core/parking_lot_core-0.3.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/percent-encoding/percent-encoding-1.0.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/proc-macro2/proc-macro2-0.4.24.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/quote/quote-0.6.10.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand/rand-0.4.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand/rand-0.5.5.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand/rand-0.6.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_chacha/rand_chacha-0.1.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_core/rand_core-0.2.2.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_core/rand_core-0.3.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_hc/rand_hc-0.1.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_isaac/rand_isaac-0.1.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_pcg/rand_pcg-0.1.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rand_xorshift/rand_xorshift-0.1.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/redox_syscall/redox_syscall-0.1.44.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/redox_users/redox_users-0.2.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/regex-syntax/regex-syntax-0.6.4.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/regex/regex-1.1.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/remove_dir_all/remove_dir_all-0.5.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rustc-demangle/rustc-demangle-0.1.11.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/rustc_version/rustc_version-0.2.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/scoped_threadpool/scoped_threadpool-0.1.9.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/scopeguard/scopeguard-0.3.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/semver-parser/semver-parser-0.7.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/semver/semver-0.9.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/smallvec/smallvec-0.6.7.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/syn/syn-0.15.23.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/synstructure/synstructure-0.10.1.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/tempfile/tempfile-3.0.5.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/thread_local/thread_local-0.3.6.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/time/time-0.1.41.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/ucd-util/ucd-util-0.1.3.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/unicode-bidi/unicode-bidi-0.3.4.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/unicode-normalization/unicode-normalization-0.1.7.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/unicode-xid/unicode-xid-0.1.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/unreachable/unreachable-1.0.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/url/url-1.7.2.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/utf8-ranges/utf8-ranges-1.0.2.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/version_check/version_check-0.1.5.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/void/void-1.0.2.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/winapi-i686-pc-windows-gnu/winapi-i686-pc-windows-gnu-0.4.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/winapi-x86_64-pc-windows-gnu/winapi-x86_64-pc-windows-gnu-0.4.0.crate \ https://crates-io.s3-us-west-1.amazonaws.com/crates/winapi/winapi-0.3.6.crate" MD5SUM="2c686365e97cb04195cf5ce979c90369 \ d26d000426208c255a95368923467618 \ e1efb9a37395a38bd80ccfc911d4a6e8 \ e59ff1a6bce94fb1013cbd54b8675de8 \ fd61c62ff949208f15ae02a4b475a1ef \ 548d43f797aa1fea23a728662bb58a2e \ d38ff4b8e1d15e7488420ea9c428e8a2 \ e5767560aad375059c975285c07022c0 \ 027635e453eccbfd0a2b02a440e334a6 \ 0e2df986078bc2376ea0c027c10d6aae \ daa64e5a0e1b6d710877be51f27ccd3c \ ed2b1c5fd000f926c2aedb0c3bd1d199 \ 1c8b50f8528dd37df7d984e0e4b61bd5 \ 701334c674b3fc3ace74045e3a2fae50 \ 701d24caea00efef86966950d11900da \ aea67af76e8072168f5346f166f9f573 \ 3af6cdff911dc3d76b9a5b3c2443d91f \ 54cfab480b7a5f7302eadf44129d3f4b \ dd7c80c2d04d2e9ceba82826cf69764d \ 89cabfcb37602a7b200b1a9cd660ee2e \ 330c760718d1130f318457fe4725b0dd \ 63a8bbe691a876ff0ece9893f242093a \ ac6a4d0d3c5cd5718800d285c2da55c5 \ 7916dcd738a8fa6a2798754c20d6e146 \ 1dd071d2d9c3aeb5cfc40951111476d4 \ 8a39d8bd95f15af0840d2049f0e78a37 \ 4092ed5c67c6ff1c6a7bcf463bc40a53 \ cbdebc326641fcab42bc92a113548740 \ eb990419bab44aa031d841e5e53dc5cc \ cfc2fa00b6829d7e27c3c81c669e5fed \ 27363360c544fc6f398567e759821bca \ 8a5fc6ba84f3ac8a7e43ecb99322866c \ 956a07fa5991333acd1a222c68950194 \ cff6d0d12e74ebe26535ee9c6668d1cc \ b8e402de21805717cdaa0c2f122a2a26 \ 47bbc871bdfc0b6c2213c1b60890fe92 \ bf6d57361c2f4106b3ac5e53c59406ae \ c7248b52f92354afd8f2e3960cdcb558 \ 58ce576e12cf7111693210bca7edbe76 \ 1ffaad533e741d447655a83a40fe0b66 \ 28b1e6d15e1ba8cf3a2e953ce7fcd3de \ 74b15f1928431937f14ed91fdc12b542 \ 3f5b37c228efbd014e7bb617f2abedf1 \ 8cf8f1914a173dfc73c2964b8e9b5358 \ f441e95e551ddb330e317d9c7fb85639 \ f91e69d935946bdc258a0ed22dceeaad \ e41c7199212700ca4124d26224208ccd \ 9f099c64e6db617887ba150c117baf13 \ 09422dcb1cd6e3c30598296d2d3d4798 \ 47b948a5bbabb203f9dcab1bb96956c8 \ 4d101ab24d14c54937c5f45ece8fad5f \ b492e0a70603c3903a44ec5cabd3ba21 \ 500e5bb7d9b5a8882e2e961012391a58 \ 8b4d8c7b6e3a060d365bc1ad650929fa \ 64111c20b69aa1532fb66b70c4660b55 \ c310f2e9b9edf41625ea905bfd5a67b4 \ 093ca6cb955bc1504c532add04e9ad90 \ d155c08de6c18bd55639ffed629894b9 \ b30d6b23bce6480f07df5b2056b8f937 \ baaa166f66e90e94b76b7418afd5df90 \ 879a10bf78b566c3baf4cdd22c2ec8d5 \ d34a9f507f3ecf7d93c07deb74f1cd7c \ f403bbb812ce1a2d9270d9159cf9e8d3 \ f9c3f9df08be27f5d7cc8c0a06a71d81 \ 5aaf04f9a94a6450e3e4963ddd62b92d \ b390278bbea483da591b1bc026be5fa2 \ 32f0ced8a8881d2c0572b879bf15b91e \ 9c27232c12abb96c68e10e21f2012639 \ f48add3d6234e8b9829fa5364509f425 \ 689203efc084fc0f1d1f74f5d354ae75 \ db96b50050277bf05a3c68534bbb9586 \ 09de9d01e7331ff3da11f58be8bef0df \ 40909511b3d0e2dba891f438715808d0" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="stfl" MAINTAINER="Andrew Clemons" EMAIL="andrew.clemons at gmail.com" -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From slackbuilds at jaxartes.net Thu Jan 3 18:47:21 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Thu, 3 Jan 2019 10:47:21 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103183805.GA16108@runbox.no> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <20190103183805.GA16108@runbox.no> Message-ID: On 2019-01-03 10:38 a.m., Andrew Clemons wrote: > On 2019-01-03 03:06:05 +0000, dave at tty1.uk wrote: >> [...] >>> Incidentally, there's also no pressing need to move to Newsboat 2.14 and its >>> new Rust dependency. I'm just opening the door a crack in case there's someone >>> who wants to make it happen sooner than later. >>> >>> Ben >> >> I'll take it over then and see what I can do with it. > > I have it working here, so this might help. See attached. I'm also happy > to maintain otherwise. Awesome, thanks Andrew. Since you are "the Rust guy" for SlackBuilds, what are your thoughts about adding individual crates as SlackBuilds to make script writing easier? I see a lot of the same dependencies showing up in many Rust-based scripts, but I'm not familiar enough with the Rust ecosystem to know whether this is a good idea (e.g. would the requirements for specific crate versions be an issue across different SlackBuilds?). Ben From dave at tty1.uk Thu Jan 3 18:51:24 2019 From: dave at tty1.uk (Dave Woodfall) Date: Thu, 3 Jan 2019 18:51:24 +0000 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <9f744d51-2037-ff66-1b82-cd13af4adffd@jaxartes.net> <20190103181228.GA2840@blackswan.r0t.uk> Message-ID: <20190103185124.GB2840@blackswan.r0t.uk> On Thursday 3 January 2019 10:33, Benjamin Trigona-Harany put forth the proposition: > On 2019-01-03 10:12 a.m., Dave Woodfall wrote: > > On Thursday 3 January 2019 10:04, > > Benjamin Trigona-Harany put forth the proposition: > > > On 2019-01-02 7:06 p.m., Dave Woodfall wrote: > > > > > Incidentally, there's also no pressing need to move to Newsboat 2.14 and its > > > > > new Rust dependency. I'm just opening the door a crack in case there's someone > > > > > who wants to make it happen sooner than later. > > > > > > > > > > Ben > > > > > > > > I'll take it over then and see what I can do with it. > > > > > > Looking forward to the new Rustified SlackBuild then! > > > > I'm wondering about newsbeuter though - if the Debian patches work > > and there are no other vulnerabilities at the moment I'd rather see > > that continue, at least for as long as Debian keep it alive. > > I think the better way of framing it is that there are no *known* > vulnerabilities in since no developers are looking at it any more. There are > no Debian patches incidentally; they - like my SlackBuild - are using old > upstream patches to Newsbeuter master, but those contributions ceased as > soon as the project was forked. > > Finally, Newsbeuter will not build on current and therefore 15.0 when that > is released because the code base is not compatible with json-c 0.13 > (resolved in Newsboat). I continue to encourage migrating to the active > project. > > Ben I shall continue then. It will take me some time for me to get a full dependency list together and see what's what. Dave -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From dave at tty1.uk Thu Jan 3 18:54:45 2019 From: dave at tty1.uk (Dave Woodfall) Date: Thu, 3 Jan 2019 18:54:45 +0000 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103183805.GA16108@runbox.no> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <20190103183805.GA16108@runbox.no> Message-ID: <20190103185445.GC2840@blackswan.r0t.uk> On Friday 4 January 2019 07:38, Andrew Clemons put forth the proposition: > On 2019-01-03 03:06:05 +0000, dave at tty1.uk wrote: > > [...] > > > Incidentally, there's also no pressing need to move to Newsboat 2.14 and its > > > new Rust dependency. I'm just opening the door a crack in case there's someone > > > who wants to make it happen sooner than later. > > > > > > Ben > > > > I'll take it over then and see what I can do with it. > > I have it working here, so this might help. See attached. I'm also happy > to maintain otherwise. > > Cheers, > Andrew Andrew, please feel free. I am a complete novice at rust. Dave -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From aclemons at runbox.no Thu Jan 3 19:11:52 2019 From: aclemons at runbox.no (Andrew Clemons) Date: Fri, 4 Jan 2019 08:11:52 +1300 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <20190103183805.GA16108@runbox.no> Message-ID: <20190103191151.GA9300@runbox.no> On 2019-01-03 10:47:21 -0800, slackbuilds at jaxartes.net wrote: > Awesome, thanks Andrew. > > Since you are "the Rust guy" for SlackBuilds, what are your thoughts about > adding individual crates as SlackBuilds to make script writing easier? I see > a lot of the same dependencies showing up in many Rust-based scripts, but > I'm not familiar enough with the Rust ecosystem to know whether this is a > good idea (e.g. would the requirements for specific crate versions be an > issue across different SlackBuilds?). I'm no rust expert, but as far as I can tell, this will not work because of the way rust binaries are built. I don't know of a way to actually build a crate and then link to it instead of just building it into the binary cargo is currently building. I'm fairly certain the rust devs have talked about this, but I don't think anything has been implemented yet. Other builds (debian, fedora, arch, bsds, etc) all seem to be building against the crate sources too. The "best" solution is probably to use cargo-vendor which is also on slackbuilds.org to create a tarball of all exploded crates needed to build a package and use this instead of having all the individual crates listed in the info file and messing about with manually generating the checksums. I have not done this with any of my slackbuilds for a couple of reasons. One because I would then have to worry about hosting them somewhere and adding new ones for each new version. Secondly, there is no need for a user building the slackbuilds to implicitly trust that I have done the right thing if the crates are downloaded directly from crates.io and the slackbuild itself does everything. It does mean a huge list of files to download, but this isn't something most people would manually do anyway. The build times here also do not differ. Cheers, Andrew -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From slackbuilds at jaxartes.net Thu Jan 3 21:25:08 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Thu, 3 Jan 2019 13:25:08 -0800 Subject: [Slackbuilds-users] Newsbeuter and Newsboat In-Reply-To: <20190103191151.GA9300@runbox.no> References: <1987281.807BjAPioq@wintermute.sprawl.net> <20190103020901.GU13219@blackswan.r0t.uk> <3056569.6QcBKmMV9D@wintermute.sprawl.net> <20190103030605.GV13219@blackswan.r0t.uk> <20190103183805.GA16108@runbox.no> <20190103191151.GA9300@runbox.no> Message-ID: <0bb4d361-1410-2d5c-3eed-10269bc5f31e@jaxartes.net> On 2019-01-03 11:11 a.m., Andrew Clemons wrote: > On 2019-01-03 10:47:21 -0800, slackbuilds at jaxartes.net wrote: > > I'm no rust expert, but as far as I can tell, this will not work because > of the way rust binaries are built. I don't know of a way to actually > build a crate and then link to it instead of just building it into the > binary cargo is currently building. I'm fairly certain the rust devs > have talked about this, but I don't think anything has been implemented > yet. Other builds (debian, fedora, arch, bsds, etc) all seem to be > building against the crate sources too. Thanks for that info. The closest other alternative in that case would be if the SlackBuild installed the crate sources for use by other SlackBuilds. Definitely not clear to me it's worth it though just to have cleaner .info and .SlackBuild files. Ben From gen-bch at useyouresp.org.uk Fri Jan 4 13:47:34 2019 From: gen-bch at useyouresp.org.uk (Habs) Date: Fri, 4 Jan 2019 13:47:34 +0000 (GMT) Subject: [Slackbuilds-users] (no subject) Message-ID: Good day rsamurti (cc: slackbuild-users) I am struggling to download the "Lyx" source code - there is no access and it seems as if the source location has moved/changed. Even going to the Lyx website and trying from there is causing issues...it seems upstream have changed things...or is it just me ! Regards Habs --- Sent using Alpine/Pine, a text based MUA --- From gen-bch at useyouresp.org.uk Fri Jan 4 13:49:32 2019 From: gen-bch at useyouresp.org.uk (Habs) Date: Fri, 4 Jan 2019 13:49:32 +0000 (GMT) Subject: [Slackbuilds-users] Download Lyx source code issues Message-ID: Good day rsamurti (cc: slackbuild-users) I am struggling to download the "Lyx" source code - there is no access and it seems as if the source location has moved/changed. Even going to the Lyx website and trying from there is causing issues...it seems upstream have changed things...or is it just me ! Regards Habs PS: reposted this original as missing 'subject' on previous - apologies. --- Sent using Alpine/Pine, a text based MUA --- From willysr at slackbuilds.org Sat Jan 5 01:09:28 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 5 Jan 2019 08:09:28 +0700 Subject: [Slackbuilds-users] Updates - 20190105.1 Message-ID: <08e7073a-a5e1-abd0-1ca1-4c63b4dd5cb5@slackbuilds.org> Welcome to the first update in 2019. It's a fresh start, but we do have more than 80 changes in this batch, including some new scripts. As meson is now updated to 0.49.0, there might be some glitch for some scripts. Let us know if there's a regression with some scripts that depends on meson. Sat Jan 5 00:50:43 UTC 2019 academic/amd: Updated for SuiteSparse 5.4.0. academic/arpack-ng: Updated for version 3.6.3. academic/bcftools: Added (BCF calling tools). academic/bowtie2: Updated for version 2.3.4.3 + new maintainer. academic/btf: Updated for SuiteSparse 5.4.0. academic/camd: Updated for SuiteSparse 5.4.0. academic/ccolamd: Updated for SuiteSparse 5.4.0. academic/cholmod: Updated for version 3.0.13. academic/colamd: Updated for SuiteSparse 5.4.0. academic/csparse: Updated for SuiteSparse 5.4.0. academic/cxsparse: Updated for SuiteSparse 5.4.0. academic/klu: Updated for SuiteSparse 5.4.0. academic/ldl: Updated for SuiteSparse 5.4.0. academic/ngspice: Updated for version 29. academic/octave: Updated for version 4.4.1. academic/pari: Updated for version 2.11.1. academic/qrupdate: Update URLs and patches. academic/rbio: Updated for SuiteSparse 5.4.0. academic/samtools: Updated for version 1.9 + new maintainer. academic/spqr: Updated for version 2.0.9. academic/suitesparseconfig: Updated for version 5.4.0. academic/umfpack: Updated for version 5.7.8. audio/TiMidity++: Updated for version 2.15.0. audio/freepats: Update URLs, script cleanup. desktop/qtile: Updated for version 0.13.0. desktop/xearth: Added (animated map). desktop/xfce4-volumed-pulse: Updated DOWNLOAD url. development/cloc: Updated for version 1.80. development/d-tools: Updated for version 2.084.0 development/dmd: Updated for version 2.084.0 development/global: Updated for version 6.6.3 development/meson: Updated for version 0.49.0. development/neovim: Updated for version 0.3.2. development/netbeans: Updated for version 10.0. development/samurai: Updated for version 0.5 + new maintainer. development/tanya: Updated for version 0.14.0 development/universal-ctags: Updated for version 0b04c12 development/yarn: Updated for version 1.13.0. games/edgar: Updated for version 1.30. games/mame: Updated for version 0.205. gis/gpxsee: Updated for version 7.1. gis/pyproj: Updated for version 1.9.6. libraries/appstream-glib: Fix building with meson 0.49.0. libraries/bullet: Updated for version 2.88. libraries/efivar: Updated for version 37. libraries/gtkdatabox: Updated for version 0.9.3.1. libraries/htslib: Added (High Troughput Sequencing Library). libraries/libetpan: Updated for version 1.9.2. libraries/libmediainfo: Updated for version 18.12. libraries/libxmlb: Added (A library to handle binary XML blobs). libraries/qt5-pbfimageplugin: Updated for version 1.2. misc/jmri: Updated for version 4.14. misc/qtkeychain: Updated for version 0.9.1. multimedia/mediainfo: Updated for version 18.12. network/asterisk: Updated for version 16.1.1. network/chrony: Fix pid file path. network/dropbox: Updated for version 63.4.107. network/go-ipfs: Added (InterPlanetary File System). network/ircd-hybrid: Added (IRC daemon). network/neomutt: Fix README. network/newsboat: Updated for version 2.14. network/pdns-recursor: Updated for version 4.1.8. network/pdns: Updated for version 4.1.5. network/privoxy: Updated for version 3.0.28. network/quassel-qt5: Added (Distributed IRC client). network/quassel: Updated for version 0.13.0. network/transgui: Updated for version 5.16.0. network/youtube-dl: Updated for version 2018.12.17. office/ReText: Added (Markdown Editor). office/lyx: Update source. perl/perl-Cpanel-JSON-XS: Updated for version 4.08. perl/perl-DBD-SQLite: Updated for version 1.62. perl/perl-Data-Random: Updated for version 0.13. perl/perl-Test-MockTime: Added (Perl Module). perl/perl-parallel-forkmanager: Added (Parallel Processing Manager). python/Markups: Added (Wrapper around various text markups). python/python-precis-i18n: Added (Int'd Usernames/Passwords). python/python3-pyparsing: Updated for version 2.2.0. python/shutil_which: Updated for version 3.5.2. ruby/rubygem-bundler: Updated for version 1.17.3. ruby/rubygem-rubocop: Updated for version 0.62.0. ruby/rubygem-unicode-display_width: Updated for version 1.4.1. system/Iosevka: Updated for version 2.0.2. system/fwupd: Updated for version 1.2.3. system/letsencrypt: Updated for version 0.30.0. system/passwordsafe: Updated for version 1.07BETA. +--------------------------+ -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sat Jan 5 01:43:13 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 5 Jan 2019 08:43:13 +0700 Subject: [Slackbuilds-users] OpenBLAS issue In-Reply-To: References: Message-ID: > openBLAS slackbuild is failing to complete. > it bombs out with the following message. > > ar: sgemm_kernel.o: No such file or directory > ../Makefile.tail:40: recipe for target 'libs' failed > make[1]: *** [libs] Error 1 > make[1]: Leaving directory '/tmp/SBo/OpenBLAS-0.3.3/kernel' > Makefile:145: recipe for target 'libs' failed > make: *** [libs] Error 1 > > Any ideas.? it has no deps, and I'm running on fully a patched > slackware64 14.2 vm It works fine here on my vm OpenBLAS: MD5SUM check for OpenBLAS-0.3.3.tar.gz ... OK Building package OpenBLAS-0.3.3-x86_64-1_SBo.tgz ... OK -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sun Jan 6 03:17:37 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 6 Jan 2019 10:17:37 +0700 Subject: [Slackbuilds-users] libreoffice-{help,lang}pack Message-ID: <7bb6fc91-6c17-50ca-62af-7f96d0a98dd8@slackbuilds.org> Hi all, I wanted to ask for your opinion about the issue regarding libreoffice-langpack and helppack. Someone posted this on LQ (https://www.linuxquestions.org/questions/slackware-14/installed-two-libreoffice-helppacks-now-slackpkg-thinks-i-have-a-broken-var-log-packages-4175645607/) The original author of libreoffice-langpack and libreoffice-helppack maybe assume that people will need just one language installed on their machine and made the SlackBuild script flexible enough to handle different language if needed, but apparently, it's not enough for some cases where people installed two different languages as it causes pkgtool to think that the system is broken due to having the same package name. I wonder if anyone who uses libreoffice (RPM repackaging) package uses more than one language/help on their system? -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From dickson.tim at googlemail.com Sun Jan 6 22:30:10 2019 From: dickson.tim at googlemail.com (Tim Dickson) Date: Sun, 6 Jan 2019 22:30:10 +0000 Subject: [Slackbuilds-users] transcode source link down Message-ID: <256f1027-9210-7257-25e8-6ac8af0f9831@googlemail.com> transcode source download url is 404'ing the link used by LFS is working and has same md5 https://sources.archlinux.org/other/community/transcode/transcode-1.1.7.tar.bz2 From willysr at slackbuilds.org Sun Jan 6 23:43:01 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Mon, 7 Jan 2019 06:43:01 +0700 Subject: [Slackbuilds-users] transcode source link down In-Reply-To: <256f1027-9210-7257-25e8-6ac8af0f9831@googlemail.com> References: <256f1027-9210-7257-25e8-6ac8af0f9831@googlemail.com> Message-ID: > transcode source download url is 404'ing > the link used by LFS is working and has same md5 > https://sources.archlinux.org/other/community/transcode/transcode-1.1.7.tar.bz2 Pushed to my branch Thanks -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From yalhcru at gmail.com Mon Jan 7 07:29:11 2019 From: yalhcru at gmail.com (B Watson) Date: Mon, 7 Jan 2019 02:29:11 -0500 Subject: [Slackbuilds-users] bogus md5sum for games/tbftss Message-ID: $ grep MD5SUM= games/tbftss/tbftss.info MD5SUM="6a7db5fc702d4a31679271c2f778d4ffs" Notice the md5sum ends with the letter "s", which isn't a valid hex digit. The md5sum would otherwise match: $ md5sum games/tbftss/tbftss-1.5.0.src.tar.gz 6a7db5fc702d4a31679271c2f778d4ff games/tbftss/tbftss-1.5.0.src.tar.gz If whoever approved the submission had used sbolint: $ cd games/tbftss $ sbolint tbftss: ERR: tbftss.info: MD5SUM '6a7db5fc702d4a31679271c2f778d4ffs' is invalid (must be 32 hex digits) tbftss: errors 1, warnings 0 Script lives here: http://urchlay.naptime.net/repos/sbostuff/plain/sbolint I use it for my own submissions to avoid simple mistakes (still make plenty of mistakes, but they're complex & horrible ones, not simple...) From willysr at slackbuilds.org Mon Jan 7 11:54:19 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Mon, 7 Jan 2019 18:54:19 +0700 Subject: [Slackbuilds-users] bogus md5sum for games/tbftss In-Reply-To: References: Message-ID: <5dd1bd57-17c5-d017-8ead-fdb9d7d419cc@slackbuilds.org> > $ grep MD5SUM= games/tbftss/tbftss.info > MD5SUM="6a7db5fc702d4a31679271c2f778d4ffs" > > Notice the md5sum ends with the letter "s", which isn't a valid hex digit. > The md5sum would otherwise match: > > $ md5sum games/tbftss/tbftss-1.5.0.src.tar.gz > 6a7db5fc702d4a31679271c2f778d4ff games/tbftss/tbftss-1.5.0.src.tar.gz Fixed in my branch -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From phalange at komputermatrix.com Mon Jan 7 19:12:06 2019 From: phalange at komputermatrix.com (Andrew Payne) Date: Mon, 7 Jan 2019 14:12:06 -0500 Subject: [Slackbuilds-users] rofi slackbuild Message-ID: <414a618f6c73a84edd8c79a99409f376.squirrel@email.fatcow.com> Hi everyone, I emailed the maintainer Andrew Lobanov on 12-21 and haven't heard back. I'd be pleased to take over maintaining Rofi if that's an option. The SBo is pretty far behind. I've built and tested the newest Rofi 1.5.2 on Slackware 14.2 (and also on current) with no issues. Best -Andrew From andrew.david.strong at gmail.com Mon Jan 7 22:28:32 2019 From: andrew.david.strong at gmail.com (andrew) Date: Tue, 8 Jan 2019 09:28:32 +1100 Subject: [Slackbuilds-users] mac download link 404 Message-ID: <20190107222832.GA12839@ilium.andrews-corner.org> Hi, The download link for mac is 404 consistently over the last few days. The most reliable link I have found is here: http://distfiles.exherbo.org/distfiles/mac-3.99-u4-b5-s7.tar.gz I have cc'd the maintainer in this email... Andrew -- You think that's air you're breathing now? From willysr at slackbuilds.org Mon Jan 7 23:53:35 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Tue, 8 Jan 2019 06:53:35 +0700 Subject: [Slackbuilds-users] rofi slackbuild In-Reply-To: <414a618f6c73a84edd8c79a99409f376.squirrel@email.fatcow.com> References: <414a618f6c73a84edd8c79a99409f376.squirrel@email.fatcow.com> Message-ID: > Hi everyone, I emailed the maintainer Andrew Lobanov on 12-21 and haven't > heard back. I'd be pleased to take over maintaining Rofi if that's an > option. The SBo is pretty far behind. > > I've built and tested the newest Rofi 1.5.2 on Slackware 14.2 (and also on > current) with no issues. Sure, He hasn't updated the script since the first time he submitted -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From yalhcru at gmail.com Tue Jan 8 00:03:16 2019 From: yalhcru at gmail.com (B Watson) Date: Mon, 7 Jan 2019 19:03:16 -0500 Subject: [Slackbuilds-users] mac download link 404 In-Reply-To: <20190107222832.GA12839@ilium.andrews-corner.org> References: <20190107222832.GA12839@ilium.andrews-corner.org> Message-ID: On 1/7/19, andrew wrote: > Hi, > > The download link for mac is 404 consistently over the last few days. > The most reliable link I have found is here: > > http://distfiles.exherbo.org/distfiles/mac-3.99-u4-b5-s7.tar.gz I also found it here: http://ftp.netbsd.org/pub/pkgsrc/distfiles/mac-3.99-u4-b5-s7.tar.gz I'll update the .info file to use the netbsd link (no idea what exherbo is, but netbsd has been around for a while and I expect it to stick around a while longer). From andrew.david.strong at gmail.com Tue Jan 8 10:40:02 2019 From: andrew.david.strong at gmail.com (andrew) Date: Tue, 8 Jan 2019 21:40:02 +1100 Subject: [Slackbuilds-users] mac download link 404 In-Reply-To: References: <20190107222832.GA12839@ilium.andrews-corner.org> Message-ID: <20190108104002.GA20551@ilium.andrews-corner.org> On Mon, Jan 07, 2019 at 07:03:16PM -0500, B Watson wrote: > I also found it here: > > http://ftp.netbsd.org/pub/pkgsrc/distfiles/mac-3.99-u4-b5-s7.tar.gz > > I'll update the .info file to use the netbsd link (no idea what exherbo > is, but netbsd has been around for a while and I expect it to stick > around a while longer). Looks like a much better choice :) Andrew -- You think that's air you're breathing now? From gugkwf+5s7928406wse0 at guerrillamail.com Sun Jan 6 22:53:36 2019 From: gugkwf+5s7928406wse0 at guerrillamail.com (gugkwf+5s7928406wse0 at guerrillamail.com) Date: Sun, 06 Jan 2019 22:53:36 +0000 Subject: [Slackbuilds-users] exfat Message-ID: <251af77fa6e10f73064b9c3236c40b64c681@guerrillamail.com> I wonder if fuse-exfat and exfat-utils can get a version bumb to latest version 1.3.0 I only needed to change the version for it to compile and work. Why i think it should be done is that exfat-utils-1.3.0 adds functionality. With exfat-utils-1.3.0 exfatfsck can repair some errors to the filesystem while current 1.2.8 only can check for errors. The newer release also has better FUSE 3 support something that current might need in the future. https://github.com/relan/exfat/releases/tag/v1.3.0 ---- Sent using Guerrillamail.com Block or report abuse: https://www.guerrillamail.com//abuse/?a=Uk11BgYCVr0ZjB355W0aYAfnXsaR0dxS0q1OeMy4BBY5 From 1.41421 at gmail.com Tue Jan 8 15:33:42 2019 From: 1.41421 at gmail.com (JCA) Date: Tue, 8 Jan 2019 08:33:42 -0700 Subject: [Slackbuilds-users] ReText broken? Message-ID: I installed ReText with sbopkg on two different systems running 14.2, and here is what I am getting: Using configuration file: /home/xyz/.config/ReText project/ReText.conf Traceback (most recent call last): File "/usr/bin/retext", line 111, in main() File "/usr/bin/retext", line 79, in main window = ReTextWindow() File "/usr/lib64/python3.6/site-packages/ReText/window.py", line 217, in __init__ availableMarkups = markups.get_available_markups() File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 33, in get_available_markups for markup in get_all_markups(): File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 23, in get_all_markups return [entry_point.load() for entry_point in entry_points] File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 23, in return [entry_point.load() for entry_point in entry_points] File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", line 2323, in load self.require(*args, **kwargs) File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", line 2346, in require items = working_set.resolve(reqs, env, installer, extras=self.extras) File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", line 778, in resolve raise DistributionNotFound(req, requirers) pkg_resources.DistributionNotFound: The 'python-markdown-math' distribution was not found and is required by the application -------------- next part -------------- An HTML attachment was scrubbed... URL: From d.zlatanidis at gmail.com Tue Jan 8 17:29:20 2019 From: d.zlatanidis at gmail.com (Dimitris Zlatanidis) Date: Tue, 8 Jan 2019 18:29:20 +0100 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: References: Message-ID: It seems missing markdown dependency. On Tue, Jan 8, 2019, 16:49 JCA <1.41421 at gmail.com wrote: > I installed ReText with sbopkg on two different systems running 14.2, and > here is what I am getting: > > Using configuration file: /home/xyz/.config/ReText project/ReText.conf > Traceback (most recent call last): > File "/usr/bin/retext", line 111, in > main() > File "/usr/bin/retext", line 79, in main > window = ReTextWindow() > File "/usr/lib64/python3.6/site-packages/ReText/window.py", line 217, in > __init__ > availableMarkups = markups.get_available_markups() > File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 33, > in get_available_markups > for markup in get_all_markups(): > File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 23, > in get_all_markups > return [entry_point.load() for entry_point in entry_points] > File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 23, > in > return [entry_point.load() for entry_point in entry_points] > File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", > line 2323, in load > self.require(*args, **kwargs) > File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", > line 2346, in require > items = working_set.resolve(reqs, env, installer, extras=self.extras) > File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", > line 778, in resolve > raise DistributionNotFound(req, requirers) > pkg_resources.DistributionNotFound: The 'python-markdown-math' > distribution was not found and is required by the application > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From 2p3rf3ct at gmail.com Wed Jan 9 14:06:43 2019 From: 2p3rf3ct at gmail.com (Robert Logan) Date: Wed, 9 Jan 2019 14:06:43 +0000 Subject: [Slackbuilds-users] GDAL build with version 2.4.0 Message-ID: I downloaded the build for gdal, but upped the software version to match the latest (at this time) source (2.4.0). The build script gdal.SlackBuild has a mismatch bug - in the GDAL software package they have corrected a misspelled filename 'COMMITERS' to 'COMMITTERS'. I edited the gdal.SlackBuild to reflect this on the package build - all good. From 1.41421 at gmail.com Tue Jan 8 17:53:53 2019 From: 1.41421 at gmail.com (JCA) Date: Tue, 8 Jan 2019 10:53:53 -0700 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: References: Message-ID: Right. It would seem that the sbopkg queue file for ReText doesn't list Markdown as a dependency. I installed it it myself, and the issue that I mentioned remains. On Tue, Jan 8, 2019 at 10:29 AM Dimitris Zlatanidis wrote: > It seems missing markdown dependency. > > On Tue, Jan 8, 2019, 16:49 JCA <1.41421 at gmail.com wrote: > >> I installed ReText with sbopkg on two different systems running 14.2, and >> here is what I am getting: >> >> Using configuration file: /home/xyz/.config/ReText project/ReText.conf >> Traceback (most recent call last): >> File "/usr/bin/retext", line 111, in >> main() >> File "/usr/bin/retext", line 79, in main >> window = ReTextWindow() >> File "/usr/lib64/python3.6/site-packages/ReText/window.py", line 217, >> in __init__ >> availableMarkups = markups.get_available_markups() >> File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 33, >> in get_available_markups >> for markup in get_all_markups(): >> File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 23, >> in get_all_markups >> return [entry_point.load() for entry_point in entry_points] >> File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line 23, >> in >> return [entry_point.load() for entry_point in entry_points] >> File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", >> line 2323, in load >> self.require(*args, **kwargs) >> File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", >> line 2346, in require >> items = working_set.resolve(reqs, env, installer, extras=self.extras) >> File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", >> line 778, in resolve >> raise DistributionNotFound(req, requirers) >> pkg_resources.DistributionNotFound: The 'python-markdown-math' >> distribution was not found and is required by the application >> >> _______________________________________________ >> SlackBuilds-users mailing list >> SlackBuilds-users at slackbuilds.org >> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users >> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ >> FAQ - https://slackbuilds.org/faq/ >> >> _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From 1.41421 at gmail.com Tue Jan 8 17:55:35 2019 From: 1.41421 at gmail.com (JCA) Date: Tue, 8 Jan 2019 10:55:35 -0700 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: References: Message-ID: Actually, Markdown is listed as optional. At any rate, like I said, installing it does not solve the problem. On Tue, Jan 8, 2019 at 10:53 AM JCA <1.41421 at gmail.com> wrote: > Right. It would seem that the sbopkg queue file for ReText doesn't list > Markdown as a dependency. I installed it it myself, and the issue that I > mentioned remains. > > On Tue, Jan 8, 2019 at 10:29 AM Dimitris Zlatanidis < > d.zlatanidis at gmail.com> wrote: > >> It seems missing markdown dependency. >> >> On Tue, Jan 8, 2019, 16:49 JCA <1.41421 at gmail.com wrote: >> >>> I installed ReText with sbopkg on two different systems running 14.2, >>> and here is what I am getting: >>> >>> Using configuration file: /home/xyz/.config/ReText project/ReText.conf >>> Traceback (most recent call last): >>> File "/usr/bin/retext", line 111, in >>> main() >>> File "/usr/bin/retext", line 79, in main >>> window = ReTextWindow() >>> File "/usr/lib64/python3.6/site-packages/ReText/window.py", line 217, >>> in __init__ >>> availableMarkups = markups.get_available_markups() >>> File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line >>> 33, in get_available_markups >>> for markup in get_all_markups(): >>> File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line >>> 23, in get_all_markups >>> return [entry_point.load() for entry_point in entry_points] >>> File "/usr/lib64/python3.6/site-packages/markups/__init__.py", line >>> 23, in >>> return [entry_point.load() for entry_point in entry_points] >>> File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", >>> line 2323, in load >>> self.require(*args, **kwargs) >>> File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", >>> line 2346, in require >>> items = working_set.resolve(reqs, env, installer, extras=self.extras) >>> File "/usr/lib64/python3.6/site-packages/pkg_resources/__init__.py", >>> line 778, in resolve >>> raise DistributionNotFound(req, requirers) >>> pkg_resources.DistributionNotFound: The 'python-markdown-math' >>> distribution was not found and is required by the application >>> >>> _______________________________________________ >>> SlackBuilds-users mailing list >>> SlackBuilds-users at slackbuilds.org >>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users >>> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ >>> FAQ - https://slackbuilds.org/faq/ >>> >>> _______________________________________________ >> SlackBuilds-users mailing list >> SlackBuilds-users at slackbuilds.org >> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users >> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ >> FAQ - https://slackbuilds.org/faq/ >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: From leoc at gmx.com Wed Jan 9 18:11:35 2019 From: leoc at gmx.com (Leonardo Citrolo) Date: Wed, 9 Jan 2019 19:11:35 +0100 Subject: [Slackbuilds-users] gitlab artifact direct download link? Message-ID: <20190109191135.5ebd2fa6fdfdae522313ec3d@gmx.com> Hi SlackBuilders, I recently came across an interesting project hosted on gitlab called 'thunar-custom-actions', which basically provides a couple of scripts to manage all Thunar custom actions system-wide, plus a set of pre-configured useful ones. Unfortunately among its build requirements is 'pandoc', which, according to its .sqf file, in turn depends on 139 haskell packages, and I really don't think that anyone would like to download and build all those just to extend the Thunar file manager. (I certainly don't want to) On the other hand, the upstream developer provides also the debian package as a gitlab 'artifact', so I've download it and written a SlackBuild to convert it into a Slackware package. Everything seems to be working nicely so I'm almost ready to share my SlackBuild with you; the problem is that I can't find a direct URL for a gitlab 'artifact', I've consulted the gitlab on-line documentation but there doesn't seem to be any. What do you suggest? Thanks Leo From didier at slint.fr Wed Jan 9 21:42:09 2019 From: didier at slint.fr (Didier Spaier) Date: Wed, 9 Jan 2019 22:42:09 +0100 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: References: Message-ID: <10e95b13-1f61-595d-e904-05fe95f5e311@slint.fr> Hello, On 08/01/2019 18:55, JCA wrote: > Actually, Markdown is listed as optional. At any rate, like I said, > installing it does not solve the problem. The error message mentions python-markdown-math available here: https://github.com/mitya57/python-markdown-math Didier From willysr at slackbuilds.org Wed Jan 9 21:44:57 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Thu, 10 Jan 2019 04:44:57 +0700 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: <10e95b13-1f61-595d-e904-05fe95f5e311@slint.fr> References: <10e95b13-1f61-595d-e904-05fe95f5e311@slint.fr> Message-ID: <41a95475-1562-b327-7e39-67db08e92a73@slackbuilds.org> >> Actually, Markdown is listed as optional. At any rate, like I said, >> installing it does not solve the problem. > > The error message mentions python-markdown-math available > here: https://github.com/mitya57/python-markdown-math There's a note at the bottom of this project's page: If you use ReText, this extension is not needed as it is included by default. -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From didier at slint.fr Wed Jan 9 21:50:55 2019 From: didier at slint.fr (Didier Spaier) Date: Wed, 9 Jan 2019 22:50:55 +0100 Subject: [Slackbuilds-users] gitlab artifact direct download link? In-Reply-To: <20190109191135.5ebd2fa6fdfdae522313ec3d@gmx.com> References: <20190109191135.5ebd2fa6fdfdae522313ec3d@gmx.com> Message-ID: <2697f83b-b2bf-4dd2-519a-2e7f629f4593@slint.fr> Hello, On 09/01/2019 19:11, Leonardo Citrolo wrote: > Hi SlackBuilders, > I recently came across an interesting project hosted on gitlab called > 'thunar-custom-actions', which basically provides a couple of scripts > to manage all Thunar custom actions system-wide, plus a set of > pre-configured useful ones. > > Unfortunately among its build requirements is 'pandoc', which, > according to its .sqf file, in turn depends on 139 haskell packages, and > I really don't think that anyone would like to download and build all > those just to extend the Thunar file manager. (I certainly don't want > to) > > On the other hand, the upstream developer provides also the debian > package as a gitlab 'artifact', so I've download it and written a > SlackBuild to convert it into a Slackware package. > > Everything seems to be working nicely so I'm almost ready to share my > SlackBuild with you; the problem is that I can't find a direct URL for > a gitlab 'artifact', I've consulted the gitlab on-line documentation but > there doesn't seem to be any. > What do you suggest? > > Thanks > Leo Why not instead provide a SlackBuild that just packaged the official binary? I have done something similar here: http://slackware.uk/slint/x86_64/slint-14.2.1/next/source/pandoc/ That's not in the SlackBuild format, rater the SLKBUILD is supposed to be used by the slkbuild utility, but you get the idea. Best, Dider From serban.udrea at skmail.ikp.physik.tu-darmstadt.de Thu Jan 10 08:21:49 2019 From: serban.udrea at skmail.ikp.physik.tu-darmstadt.de (Serban Udrea) Date: Thu, 10 Jan 2019 09:21:49 +0100 Subject: [Slackbuilds-users] possible matplotlib patch In-Reply-To: References: Message-ID: <447f5420-46a5-d1f9-dae2-7961dcc4da37@skmail.ikp.physik.tu-darmstadt.de> On 12/6/18 9:49 AM, Serban Udrea wrote: > On 12/4/18 5:10 PM, Fellype wrote: >> Hi Benjamin, >> >> Are you using a 32-bit system? This silent fail occurred only on the machine I >> run Slackware 32-bits, and only for the 2.x matplotlib (1.x build fine). But I >> haven't had time to investigate the reason(s) of the fail. >> ... > ... Hello, and all the best for 2019! As it looks like the problem is with the wxPython SlackBuild which installs version 2.8.x while newer versions of matplotlib require (if one wishes to have wxagg) at least 2.9.x. This is something I unfortunately overlooked while preparing the matplotlib upgrade. Many thanks go to Fellype and Benjamin for their help! There is quite some software depending on wxPython and the question is, if it would have problems with a 2.9.x version or not? If not, an upgrade of the SlackBuild is in my opinion the best solution. If yes, then one has the following possibilities: a) If wxagg is not needed, then disable it when building matplotlib, I will put this as an option in the SlackBuild. b) If wxagg is needed, then install wxPython3 in case one uses python2 or wxPython4 in case of a python3 based install(*). In the first case one may consider reinstalling wxPython afterwards. Best regards, Serban (*) Actually, it looks like this is the only option with python3. From d.zlatanidis at gmail.com Thu Jan 10 11:23:49 2019 From: d.zlatanidis at gmail.com (Dimitris Zlatanidis) Date: Thu, 10 Jan 2019 12:23:49 +0100 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: <41a95475-1562-b327-7e39-67db08e92a73@slackbuilds.org> References: <10e95b13-1f61-595d-e904-05fe95f5e311@slint.fr> <41a95475-1562-b327-7e39-67db08e92a73@slackbuilds.org> Message-ID: >From the setup.py file, markdown is a hard dependency. https://github.com/retext-project/retext/blob/master/setup.py On Wed, Jan 9, 2019, 22:45 Willy Sudiarto Raharjo >> Actually, Markdown is listed as optional. At any rate, like I said, > >> installing it does not solve the problem. > > > > The error message mentions python-markdown-math available > > here: https://github.com/mitya57/python-markdown-math > > There's a note at the bottom of this project's page: > If you use ReText, this extension is not needed as it is included by > default. > > > -- > Willy Sudiarto Raharjo > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From willysr at slackbuilds.org Thu Jan 10 12:41:16 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Thu, 10 Jan 2019 19:41:16 +0700 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: References: <10e95b13-1f61-595d-e904-05fe95f5e311@slint.fr> <41a95475-1562-b327-7e39-67db08e92a73@slackbuilds.org> Message-ID: <4f55e730-ff80-ad66-91a8-9178929508a0@slackbuilds.org> > From the setup.py file, markdown is a hard dependency. > > https://github.com/retext-project/retext/blob/master/setup.py I added markdown already in my branch -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Thu Jan 10 12:43:19 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Thu, 10 Jan 2019 19:43:19 +0700 Subject: [Slackbuilds-users] possible matplotlib patch In-Reply-To: <447f5420-46a5-d1f9-dae2-7961dcc4da37@skmail.ikp.physik.tu-darmstadt.de> References: <447f5420-46a5-d1f9-dae2-7961dcc4da37@skmail.ikp.physik.tu-darmstadt.de> Message-ID: > As it looks like the problem is with the wxPython SlackBuild which > installs version 2.8.x while newer versions of matplotlib require (if > one wishes to have wxagg) at least 2.9.x. This is something I > unfortunately overlooked while preparing the matplotlib upgrade. Many > thanks go to Fellype and Benjamin for their help! > > There is quite some software depending on wxPython and the question is, > if it would have problems with a 2.9.x version or not? If not, an > upgrade of the SlackBuild is in my opinion the best solution. If yes, > then one has the following possibilities: > > a) If wxagg is not needed, then disable it when building matplotlib, I > will put this as an option in the SlackBuild. > > b) If wxagg is needed, then install wxPython3 in case one uses python2 > or wxPython4 in case of a python3 based install(*). In the first case > one may consider reinstalling wxPython afterwards. We do have wxPython3 and wxPython4 in our repository 2.9.x was a development release towards 3.0 -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From yalhcru at gmail.com Thu Jan 10 19:02:35 2019 From: yalhcru at gmail.com (B Watson) Date: Thu, 10 Jan 2019 14:02:35 -0500 Subject: [Slackbuilds-users] system/i2c-tools needs a bit of attention Message-ID: Parallel builds fail with i2c-tools, I suggest adding -j1 to the make command in the SlackBuild (in case the user has MAKEFLAGS=-j4 or such in the environment). Also, the README and slack-desc say it includes "a python module for SMBus access", but there's no Python module in the package. Looks like it has to be built separately (cd py-smbus ; python setup.py ...) Patch attached with proposed fixes, hopefully meets with your approval. -------------- next part -------------- A non-text attachment was scrubbed... Name: i2c-tools-suggestions.diff.gz Type: application/x-gzip Size: 388 bytes Desc: not available URL: From matteo.bernardini at gmail.com Thu Jan 10 21:31:26 2019 From: matteo.bernardini at gmail.com (Matteo Bernardini) Date: Thu, 10 Jan 2019 22:31:26 +0100 Subject: [Slackbuilds-users] system/i2c-tools needs a bit of attention In-Reply-To: References: Message-ID: Il giorno gio 10 gen 2019 alle ore 20:02 B Watson ha scritto: > > Parallel builds fail with i2c-tools, I suggest adding -j1 to the make > command in the SlackBuild (in case the user has MAKEFLAGS=-j4 or such > in the environment). > > Also, the README and slack-desc say it includes "a python module for > SMBus access", but there's no Python module in the package. Looks like > it has to be built separately (cd py-smbus ; python setup.py ...) > > Patch attached with proposed fixes, hopefully meets with your approval. thanks a lot! just pushed it in my branch. Matteo From leoc at gmx.com Thu Jan 10 17:58:10 2019 From: leoc at gmx.com (Leonardo Citrolo) Date: Thu, 10 Jan 2019 18:58:10 +0100 Subject: [Slackbuilds-users] gitlab artifact direct download link? In-Reply-To: <2697f83b-b2bf-4dd2-519a-2e7f629f4593@slint.fr> References: <20190109191135.5ebd2fa6fdfdae522313ec3d@gmx.com> <2697f83b-b2bf-4dd2-519a-2e7f629f4593@slint.fr> Message-ID: <20190110185810.1f835fdaf5dd02667726ffe9@gmx.com> Hi there, In the meantime I found what I was looking for: gitlab artifacts may be browsed with this URL layout https://gitlab.com///-/jobs/artifacts//browse?job= and from there it's possible to obtained the desired direct download URL, which has a layout like this https://gitlab.com///-/jobs//artifacts/raw// So, I've finally been able to submit my new SlackBuild for approval ;-) Cheers Leo -------------------------------------------- On Wed, 9 Jan 2019 22:50:55 +0100 Didier Spaier wrote: > Hello, > > On 09/01/2019 19:11, Leonardo Citrolo wrote: > > Hi SlackBuilders, > > I recently came across an interesting project hosted on gitlab called > > 'thunar-custom-actions', which basically provides a couple of scripts > > to manage all Thunar custom actions system-wide, plus a set of > > pre-configured useful ones. > > > > Unfortunately among its build requirements is 'pandoc', which, > > according to its .sqf file, in turn depends on 139 haskell packages, and > > I really don't think that anyone would like to download and build all > > those just to extend the Thunar file manager. (I certainly don't want > > to) > > > > On the other hand, the upstream developer provides also the debian > > package as a gitlab 'artifact', so I've download it and written a > > SlackBuild to convert it into a Slackware package. > > > > Everything seems to be working nicely so I'm almost ready to share my > > SlackBuild with you; the problem is that I can't find a direct URL for > > a gitlab 'artifact', I've consulted the gitlab on-line documentation but > > there doesn't seem to be any. > > What do you suggest? > > > > Thanks > > Leo > > Why not instead provide a SlackBuild that just packaged the official > binary? > > I have done something similar here: > http://slackware.uk/slint/x86_64/slint-14.2.1/next/source/pandoc/ > That's not in the SlackBuild format, rater the SLKBUILD is supposed > to be used by the slkbuild utility, but you get the idea. > > Best, > > Dider From willysr at slackbuilds.org Sat Jan 12 00:14:19 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 12 Jan 2019 07:14:19 +0700 Subject: [Slackbuilds-users] Updates - 20190112.1 Message-ID: Hi, Here's another weekly updates Sat Jan 12 00:00:23 UTC 2019 academic/cufflinks: Update DEPS. academic/ngspice: Updated for version 30. academic/samtools-legacy: Fix path. audio/mac: Fix download link. audio/yoshimi: Updated for version 1.5.10. desktop/kwalletcli: Updated for version 3.02. desktop/neofetch: Updated for version 5.1.0. desktop/rofi: Updated for version 1.5.1 + new maintainer. desktop/spectrwm: Updated for version 3.2.0. desktop/thunar-custom-actions: Added (Thunar Custom Actions). development/gambas3: Updated for version 3.12.1. development/meld3: Updated for version 3.20.0. development/neovim: Updated for version 0.3.3. development/robotframework: Updated for version 3.1.1. games/connectagram: Updated for version 1.2.9. games/cutemaze: Updated for version 1.2.4. games/hexalate: Updated for version 1.1.4. games/openmsx-catapult: Updated for version 0.15.0. games/openmsx-debugger: Updated for version 20181202. games/openmsx: Updated for version 0.15.0. games/tanglet: Updated for version 1.5.3. games/tbftss: Fix MD5SUM. games/unnethack: Updated for version 5.2.0. gis/GMT: Updated for version 5.4.5. gis/saga-gis: Updated for version 7.1.1. graphics/qrencode: Update Email Address. libraries/OpenBLAS: Fix build on VM. libraries/libbsd: Updated for version 0.9.1. libraries/libedit: Updated for version 20181209_3.1. libraries/opencv: Updated for version 4.0.1 libraries/qwt: Updated for version 6.1.4 libraries/uriparser: Updated for version 0.9.1. libraries/wxPython4: Updated for version 4.0.4. misc/xca: Updated for version 2.1.2. multimedia/flashplayer-plugin: Updated for version 32.0.0.114. multimedia/k9copy-reloaded: Update ffmpeg version. multimedia/pepperflash-plugin: Updated for version 32.0.0.114. multimedia/transcode: Update URL. multimedia/vlc: Updated for version 3.0.5 network/brave-browser: Added (Web Browser). network/brave: Removed (Replaced by brave-browser). network/hiawatha: Updated for version 10.8.3. network/hydra: Updated for version 8.8. network/masscan: Updated for version 1.0.5. network/onionshare: Added (anonymous file sharing). network/prosody: Updated for version 0.11.2. network/proxychains: Updated for version 4.13 + new maintainer. network/scapy: Updated for version 2.4.2. network/skypeforlinux: Updated for version 8.34.0.78. network/wire: Updated for version 3.5.2881. network/wireshark: Updated for version 2.6.6. network/x11vnc: Updated for version 0.9.16 office/LibreOffice: Updated for version 6.1.4.2 office/ReText: Fix DEP. office/gnucash-docs: Updated for version 3.4. office/gnucash-legacy-docs: Update Email Address. office/gnucash-legacy: Update Email Address. office/gnucash: Updated for version 3.4. office/libreoffice-helppack: Support multiple languages. office/libreoffice-langpack: Support multiple languages. python/git-fame: Updated for version 1.6.1. python/pypng: Updated for version 0.0.19. python/pysha3: Added (SHA-3 wrapper for Python). python/python-argopt: Updated for version 0.5.0. python/python-fonttools: Updated for version 3.35.1. python/python3-django: Updated for version 2.1.5. system/btrbk: Updated for version 0.27.1. system/clamav: Updated for version 0.101.1. system/edid-decode: Added (decode EDID data). system/epson-inkjet-printer-escpr2: Updated for version 1.0.28. system/exfat-utils: Updated for version 1.3.0. system/fuse-exfat: Updated for version 1.3.0. system/i2c-tools: Use a single make job, build python modules. system/kitchen-sync: Updated for version 1.10. system/mandoc: Updated for version 1.14.4. system/read-edid: Update README, slack-desc. system/ttf-ibm-plex: Added (True Type Font). system/vagrant: Updated for version 2.2.3. system/wine: Update to 3.0.4 system/zstd: Updated for version 1.3.8. +--------------------------+ -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From lramos.prof at yahoo.com.br Sat Jan 12 13:02:08 2019 From: lramos.prof at yahoo.com.br (Luiz Carlos Ramos) Date: Sat, 12 Jan 2019 11:02:08 -0200 Subject: [Slackbuilds-users] Updates - 20190112.1 In-Reply-To: References: Message-ID: <20190112130208.GD12047@giustizia.org> Hello, I think I caught an issue in academic/ngspice. The lines 50-57 refers to a directory and contents that are not exploded anymore from the source tar.gz (ngspice-doc-30). For this reason, I received an error when the script tried to change permissions of files inside there. As I could understand, from version 29 to version 30 the docs are not distributed as a tar.gz file anymore, but rather the pdf file is downloaded (according to the .info file). Anyway, the script installs correctly the manual to the Slackware package (at /usr/doc/ngspice-30). The solution I did here was to comment out lines 50 to 57. I can send a patch if you are ok with that. Hope this may help, Luiz Ramos lramos.prof at yahoo dot com dot br S?o Paulo - Brazil On Sat, Jan 12, 2019 at 07:14:19AM +0700, Willy Sudiarto Raharjo wrote: > Hi, > > Here's another weekly updates > > > Sat Jan 12 00:00:23 UTC 2019 > academic/cufflinks: Update DEPS. > academic/ngspice: Updated for version 30. > academic/samtools-legacy: Fix path. > audio/mac: Fix download link. > audio/yoshimi: Updated for version 1.5.10. > desktop/kwalletcli: Updated for version 3.02. > desktop/neofetch: Updated for version 5.1.0. > desktop/rofi: Updated for version 1.5.1 + new maintainer. > desktop/spectrwm: Updated for version 3.2.0. > desktop/thunar-custom-actions: Added (Thunar Custom Actions). > development/gambas3: Updated for version 3.12.1. > development/meld3: Updated for version 3.20.0. > development/neovim: Updated for version 0.3.3. > development/robotframework: Updated for version 3.1.1. > games/connectagram: Updated for version 1.2.9. > games/cutemaze: Updated for version 1.2.4. > games/hexalate: Updated for version 1.1.4. > games/openmsx-catapult: Updated for version 0.15.0. > games/openmsx-debugger: Updated for version 20181202. > games/openmsx: Updated for version 0.15.0. > games/tanglet: Updated for version 1.5.3. > games/tbftss: Fix MD5SUM. > games/unnethack: Updated for version 5.2.0. > gis/GMT: Updated for version 5.4.5. > gis/saga-gis: Updated for version 7.1.1. > graphics/qrencode: Update Email Address. > libraries/OpenBLAS: Fix build on VM. > libraries/libbsd: Updated for version 0.9.1. > libraries/libedit: Updated for version 20181209_3.1. > libraries/opencv: Updated for version 4.0.1 > libraries/qwt: Updated for version 6.1.4 > libraries/uriparser: Updated for version 0.9.1. > libraries/wxPython4: Updated for version 4.0.4. > misc/xca: Updated for version 2.1.2. > multimedia/flashplayer-plugin: Updated for version 32.0.0.114. > multimedia/k9copy-reloaded: Update ffmpeg version. > multimedia/pepperflash-plugin: Updated for version 32.0.0.114. > multimedia/transcode: Update URL. > multimedia/vlc: Updated for version 3.0.5 > network/brave-browser: Added (Web Browser). > network/brave: Removed (Replaced by brave-browser). > network/hiawatha: Updated for version 10.8.3. > network/hydra: Updated for version 8.8. > network/masscan: Updated for version 1.0.5. > network/onionshare: Added (anonymous file sharing). > network/prosody: Updated for version 0.11.2. > network/proxychains: Updated for version 4.13 + new maintainer. > network/scapy: Updated for version 2.4.2. > network/skypeforlinux: Updated for version 8.34.0.78. > network/wire: Updated for version 3.5.2881. > network/wireshark: Updated for version 2.6.6. > network/x11vnc: Updated for version 0.9.16 > office/LibreOffice: Updated for version 6.1.4.2 > office/ReText: Fix DEP. > office/gnucash-docs: Updated for version 3.4. > office/gnucash-legacy-docs: Update Email Address. > office/gnucash-legacy: Update Email Address. > office/gnucash: Updated for version 3.4. > office/libreoffice-helppack: Support multiple languages. > office/libreoffice-langpack: Support multiple languages. > python/git-fame: Updated for version 1.6.1. > python/pypng: Updated for version 0.0.19. > python/pysha3: Added (SHA-3 wrapper for Python). > python/python-argopt: Updated for version 0.5.0. > python/python-fonttools: Updated for version 3.35.1. > python/python3-django: Updated for version 2.1.5. > system/btrbk: Updated for version 0.27.1. > system/clamav: Updated for version 0.101.1. > system/edid-decode: Added (decode EDID data). > system/epson-inkjet-printer-escpr2: Updated for version 1.0.28. > system/exfat-utils: Updated for version 1.3.0. > system/fuse-exfat: Updated for version 1.3.0. > system/i2c-tools: Use a single make job, build python modules. > system/kitchen-sync: Updated for version 1.10. > system/mandoc: Updated for version 1.14.4. > system/read-edid: Update README, slack-desc. > system/ttf-ibm-plex: Added (True Type Font). > system/vagrant: Updated for version 2.2.3. > system/wine: Update to 3.0.4 > system/zstd: Updated for version 1.3.8. > +--------------------------+ > > > -- > Willy Sudiarto Raharjo > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > From dominik.drobek at o2.pl Sat Jan 12 15:04:17 2019 From: dominik.drobek at o2.pl (Dominik Drobek) Date: Sat, 12 Jan 2019 16:04:17 +0100 Subject: [Slackbuilds-users] md5sum mismatch in scapy-2.4.2 Message-ID: Hi, Just noticed that the md5sum of scapy-2.4.2 doesn't match. scapy.info has: DOWNLOAD="https://github.com/secdev/scapy/archive/v2.4.2/scapy-2.4.2.tar.gz" MD5SUM="1d2559d71d73a6a4f2a987bf28c14c9d" But when I download the tarball and calculate its md5sum I'm getting a different result: $ wget https://github.com/secdev/scapy/archive/v2.4.2/scapy-2.4.2.tar.gz ... $ md5sum scapy-2.4.2.tar.gz 7e2311493535e655185823a6641afd81 scapy-2.4.2.tar.gz Regards, Dominik Drobek From sombragris at sombragris.org Sat Jan 12 16:31:00 2019 From: sombragris at sombragris.org (Eduardo Sanchez) Date: Sat, 12 Jan 2019 13:31:00 -0300 Subject: [Slackbuilds-users] gambas3 fails MD5sum Message-ID: Hi there: Using current but reporting here since I think it applies to all. gambas3 fails md5sum: > Found gambas-3.12.1.tar.bz2 in /var/cache/sbopkg. > Checking MD5SUM: > MD5SUM check for gambas-3.12.1.tar.bz2 ... FAILED! > Expected: 53f3f6629270dbcd5deb4ac6aae5e54a > Found: 20e2b07b7760be370746b9232b388efd Best regards, Eduardo -- Eduardo S?nchez Gauto, Abog., Th.M. Abogado - Traductor P?blico Matriculado Ingl?s - Espa?ol Oficina: https://goo.gl/maps/mccgBNM7Zw32 Web: http://sombragris.org - Blog: http://shadow.sombragris.org TW: @thegreyshadow - FB: /thegreyshadow - Tel?fono: (0991) 755-355 - Asunci?n, Paraguay ================================================================== -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 833 bytes Desc: OpenPGP digital signature URL: From sbolokanov at abv.bg Sat Jan 12 19:55:25 2019 From: sbolokanov at abv.bg (=?utf-8?B?0KHQuNC80L7QvdGK4oCT0KHQtdCy0LDRgA==?= =?utf-8?B?0Yog0JHQvtC70L7QutCw0L3QvtCy0Yo=?=) Date: Sat, 12 Jan 2019 21:55:25 +0200 (EET) Subject: [Slackbuilds-users] rhash update Message-ID: <745146548.244407.1547322925936@nm51.abv.bg> Since I couldn't figure out how to do a pull request at https://gitlab.com/SlackBuilds.org/slackbuilds I have attached update for rhash 1.3.7 -- ?. ?. ?????????? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ba64efaf6123fdd3c9d51c7d081e45c436eb2310.diff Type: application/octet-stream Size: 1542 bytes Desc: not available URL: From willysr at slackbuilds.org Sun Jan 13 03:38:45 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 13 Jan 2019 10:38:45 +0700 Subject: [Slackbuilds-users] md5sum mismatch in scapy-2.4.2 In-Reply-To: References: Message-ID: <5a54b25f-ec84-ad79-5900-58036d87ec04@slackbuilds.org> > Just noticed that the md5sum of scapy-2.4.2 doesn't match. scapy.info has: > > DOWNLOAD="https://github.com/secdev/scapy/archive/v2.4.2/scapy-2.4.2.tar.gz" > > MD5SUM="1d2559d71d73a6a4f2a987bf28c14c9d" > > But when I download the tarball and calculate its md5sum I'm getting a > different result: > > $ wget https://github.com/secdev/scapy/archive/v2.4.2/scapy-2.4.2.tar.gz > ... > > $ md5sum scapy-2.4.2.tar.gz > 7e2311493535e655185823a6641afd81? scapy-2.4.2.tar.gz Thanks fixed in my branch -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sun Jan 13 03:41:05 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 13 Jan 2019 10:41:05 +0700 Subject: [Slackbuilds-users] gambas3 fails MD5sum In-Reply-To: References: Message-ID: <4827fe14-1df5-8bf7-087f-3ff53fbf1dc3@slackbuilds.org> > Hi there: > > Using current but reporting here since I think it applies to all. > > gambas3 fails md5sum: > >> Found gambas-3.12.1.tar.bz2 in /var/cache/sbopkg. >> Checking MD5SUM: >> MD5SUM check for gambas-3.12.1.tar.bz2 ... FAILED! >> Expected: 53f3f6629270dbcd5deb4ac6aae5e54a >> Found: 20e2b07b7760be370746b9232b388efd Thanks pushed to my branch -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From dickson.tim at googlemail.com Sun Jan 13 13:09:12 2019 From: dickson.tim at googlemail.com (Tim Dickson) Date: Sun, 13 Jan 2019 13:09:12 +0000 Subject: [Slackbuilds-users] gambas3 fails MD5sum In-Reply-To: <4827fe14-1df5-8bf7-087f-3ff53fbf1dc3@slackbuilds.org> References: <4827fe14-1df5-8bf7-087f-3ff53fbf1dc3@slackbuilds.org> Message-ID: <9b5d8e58-7664-a2f8-7071-64db06a49551@googlemail.com> that's weird. my version had the correct md5sum, and I just checked the slackbuild I submitted and it had the same (correct) sum in the info file. I don't know where the incorrect one came from.? On 13/01/2019 03:41, Willy Sudiarto Raharjo wrote: >> Hi there: >> >> Using current but reporting here since I think it applies to all. >> >> gambas3 fails md5sum: >> >>> Found gambas-3.12.1.tar.bz2 in /var/cache/sbopkg. >>> Checking MD5SUM: >>> MD5SUM check for gambas-3.12.1.tar.bz2 ... FAILED! >>> Expected: 53f3f6629270dbcd5deb4ac6aae5e54a >>> Found: 20e2b07b7760be370746b9232b388efd > Thanks > pushed to my branch > > > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From slackbuilds at jaxartes.net Mon Jan 14 21:40:51 2019 From: slackbuilds at jaxartes.net (Benjamin Trigona-Harany) Date: Mon, 14 Jan 2019 13:40:51 -0800 Subject: [Slackbuilds-users] OpenCV build issue Message-ID: <99075246-5ae8-bf50-da38-1e91b1c74e42@jaxartes.net> OpenCV has a problem with a patch being applied when qt5 is installed. This should fix it: # Only needed if qt5 has been configured if [ -d /usr/include/qt5 ]; then cd $PRGNAM2-$VERSION patch -p1 < $CWD/patch_filter_scharr.diff cd - fi Ben From chris.willing at linux.com Mon Jan 14 22:31:18 2019 From: chris.willing at linux.com (Christoph Willing) Date: Tue, 15 Jan 2019 08:31:18 +1000 Subject: [Slackbuilds-users] OpenCV build issue In-Reply-To: <99075246-5ae8-bf50-da38-1e91b1c74e42@jaxartes.net> References: <99075246-5ae8-bf50-da38-1e91b1c74e42@jaxartes.net> Message-ID: <3ab794ff-2fbc-ad9a-43c2-e7cb26fa6cf7@linux.com> On 15/1/19 7:40 am, Benjamin Trigona-Harany wrote: > OpenCV has a problem with a patch being applied when qt5 is installed. > > This should fix it: > > # Only needed if qt5 has been configured > if [ -d /usr/include/qt5 ]; then > ? cd $PRGNAM2-$VERSION > ? patch -p1 < $CWD/patch_filter_scharr.diff > ? cd - > fi > Yes, the patch isn't needed for latest opencv-4.0.1. It's been fixed in my branch for next round of updates. chris From alik at ejik.org Thu Jan 17 20:08:55 2019 From: alik at ejik.org (Alexander Verbovetsky) Date: Thu, 17 Jan 2019 23:08:55 +0300 Subject: [Slackbuilds-users] virt-viewer needs updating Message-ID: <1547755735.339120.1637403824.05B3C5E3@webmail.messagingengine.com> Hello, the virt-viewer SlackBuild is broken due to a bug fixed in version 7.0. 3 weeks ago I sent the below message to the maintainer but received no answer. ----- From: Alexander Verbovetsky To: zakame at zakame.net Subject: virt-viewer SlackBuild Date: Tue, 25 Dec 2018 22:32:55 +0300 Dear Zak B. Elep, I tried to install virt-viewer by your SBo script, but failed, because it can't find a libspice controller. As a workaround, I bumped the version of virt-viewer to 7.0, this fixed the problem (the only additional change in virt-viewer.SlackBuild was renaming of README to README.md). Also, version 7.0 has a good download url: https://virt-manager.org/download/sources/virt-viewer/virt-viewer-7.0.tar.gz Please consider upgrade of virt-viewer SBo script. Thank you in advance! Best regards, Alexander From alik at ejik.org Fri Jan 18 13:11:23 2019 From: alik at ejik.org (Alexander Verbovetsky) Date: Fri, 18 Jan 2019 16:11:23 +0300 Subject: [Slackbuilds-users] virt-viewer needs updating In-Reply-To: <3bb0f67b-4a5c-971f-7953-bbca899e55f4@zakame.net> References: <1547755735.339120.1637403824.05B3C5E3@webmail.messagingengine.com> <3bb0f67b-4a5c-971f-7953-bbca899e55f4@zakame.net> Message-ID: <1547817083.1526070.1637976680.68F67699@webmail.messagingengine.com> On Fri, 18 Jan 2019, at 07:09, Zak B. Elep wrote: > Hi! > > On 1/18/19 4:08 AM, Alexander Verbovetsky wrote: > > Hello, > > > > the virt-viewer SlackBuild is broken due to a bug fixed in version > > 7.0. 3 weeks ago I sent the below message to the maintainer but > > received no answer. > > Sorry, I was on holiday and I think this one slipped by past me.? Let > me post virt-viewer-7.0 update today.? Thanks! > > > - Zak Thanks a lot! Best regards, Alexander From zakame at zakame.net Fri Jan 18 04:09:44 2019 From: zakame at zakame.net (Zak B. Elep) Date: Fri, 18 Jan 2019 12:09:44 +0800 Subject: [Slackbuilds-users] virt-viewer needs updating In-Reply-To: <1547755735.339120.1637403824.05B3C5E3@webmail.messagingengine.com> References: <1547755735.339120.1637403824.05B3C5E3@webmail.messagingengine.com> Message-ID: <3bb0f67b-4a5c-971f-7953-bbca899e55f4@zakame.net> Hi! On 1/18/19 4:08 AM, Alexander Verbovetsky wrote: > Hello, > > the virt-viewer SlackBuild is broken due to a bug fixed in version 7.0. > 3 weeks ago I sent the below message to the maintainer but received no > answer. Sorry, I was on holiday and I think this one slipped by past me.? Let me post virt-viewer-7.0 update today.? Thanks! - Zak > ----- > From: Alexander Verbovetsky > To: zakame at zakame.net > Subject: virt-viewer SlackBuild > Date: Tue, 25 Dec 2018 22:32:55 +0300 > > Dear Zak B. Elep, > > I tried to install virt-viewer by your SBo script, but failed, because > it can't find a libspice controller. > > As a workaround, I bumped the version of virt-viewer to 7.0, this fixed > the problem (the only additional change in virt-viewer.SlackBuild was > renaming of README to README.md). > > Also, version 7.0 has a good download url: > https://virt-manager.org/download/sources/virt-viewer/virt-viewer-7.0.tar.gz > > Please consider upgrade of virt-viewer SBo script. > > Thank you in advance! > > Best regards, > Alexander -- Zak B. Elep || zakame.net 1486 7957 454D E529 E4F1 F75E 5787 B1FD FA53 851D F57D 3713 E782 E2B2 D0DA A5F0 E14D EE0C FFC3 A672 From willysr at slackbuilds.org Fri Jan 18 13:45:15 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Fri, 18 Jan 2019 20:45:15 +0700 Subject: [Slackbuilds-users] Letsencrypt TLS-SNI-01 Deprecation Message-ID: <8be306dc-6b53-15af-a31e-aa79164122d3@slackbuilds.org> Hi, This is a notification for all letsencrypt users On February 13 2019, TLS-SNI-01 validation will be marked as deprecated as per this announcement [1], so users are advised to switch to DNS-01 or HTTP-01 validation method. You can simply run certbot and renew the certificates and make sure it has this line while performing renewal (for HTTP-01): http-01 challenge for i will update README.Slackware for letsencrypt soon. [1] https://community.letsencrypt.org/t/february-13-2019-end-of-life-for-all-tls-sni-01-validation-support/74209 -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sat Jan 19 00:49:12 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 19 Jan 2019 07:49:12 +0700 Subject: [Slackbuilds-users] Updates - 20190119.1 Message-ID: Hi Here's another batch of updates for this week Sat Jan 19 00:21:14 UTC 2019 academic/arpack-ng: Updated for version 3.7.0. academic/gpredict: Updated for version 2.3. academic/ngspice: Fix build. academic/pysam: Updated for version 0.15.2. audio/mp4tools: Updated for version 3.7. desktop/Zafiro-icons: Updated for version 0.8.3. desktop/jgmenu: Updated for version 1.6. desktop/neofetch: Updated for version 6.0.0. desktop/oranchelo-icon-theme: Updated for version 0.8.0.1. desktop/thunar-custom-actions: Update DEP. development/autoconf-archive: Updated for version 2019.01.06. development/beautysh: Updated for version 3.12. development/gambas3: Updated for version 3.12.2. development/geany-plugins: Updated for version 1.34.0. development/geany: Updated for version 1.31.0. development/hhvm: Updated for version 3.30.2 development/ioncube-loader: Updated for version 10.3.2 development/jbake: Added (Static Blog Generator). development/jdk: Updated for version 8u202. development/meld3: Updated for version 3.18.3. development/mutagen: Updated for version 1.42.0. development/neovim-qt: Updated for version 0.2.12. development/neovim: Updated for version 0.3.4. development/pkgconf: Updated for version 1.6.0. development/postman: Added (Test Tool). development/pycharm: Updated for version 2018.3.3. development/qgnomeplatform: Updated for version 0.5. development/sbcl: Updated for version 1.4.15. development/universal-ctags: Updated for version 5a2b65f gis/OWSLib: Updated for version 0.17.1. gis/ossim: Updated for version 2.6.2. gis/saga-gis: Fix build failures. graphics/dcraw: Updated for version 9.28.0. graphics/nomacs: Updated for version 3.12. libraries/c-ares: Updated for version 1.15.0. libraries/libbde: Updated for version 20181227. libraries/libesedb: Updated for version 20181228. libraries/libevt: Updated for version 20181216. libraries/libevtx: Updated for version 20181216. libraries/libewf: Updated for version 20140804. libraries/libinput: Updated for version 1.12.5. libraries/libjwt: Updated for version 1.10.1. libraries/libregf: Updated for version 20181129. libraries/libuv: Updated for version 1.25.0. libraries/libvhdi: Updated for version 20181125. libraries/libvmdk: Updated for version 20181216. libraries/libxnvctrl: Updated for version 410.78. libraries/matplotlib: Fix script. libraries/mxml: Updated for version 2.12. libraries/opencv: Remove unneeded patch libraries/quazip-qt5: Added (Qt/C++ wrapper for ZIP/UNZIP package). libraries/tolua++: Switch to the sources on github, use cmake. libraries/ulfius: Updated for version 2.5.3. libraries/xml-security-c: Updated for version 2.0.2. multimedia/QMPlay2: Updated for version 18.12.26. multimedia/opera-developer-ffmpeg-codecs: Updated for version 0.35. multimedia/opera-ffmpeg-codecs: Updated for version 0.35. multimedia/vlc: Updated for version 3.0.6 network/basilisk-bin: Updated for version 2018.12.18. network/basilisk: Updated for version 2018.12.18. network/bitcoin: Updated for version 0.17.1. network/brave-browser: Updated for version 0.58.21. network/bwm-ng: Updated for version 0.6.2. network/ipscan: Updated for version 3.5.5. network/offlineimap: Updated for version 7.2.2. network/opera-developer: Updated for version 59.0.3192.0. network/opera: Updated for version 57.0.3098.116. network/palemoon-bin: Updated for version 28.3.0. network/palemoon: Updated for version 28.3.0. network/phpmyadmin: Updated for version 4.8.4. network/prosody-mod-http-upload: Updated for version hg3441. network/scapy: Fix MD5SUM. network/shorewall-core: Updated for version 5.2.2. network/shorewall6: Updated for version 5.2.2. network/shorewall: Updated for version 5.2.2. network/signal-desktop: Updated for version 1.20.0. network/sipp: Updated for version 3.5.2. network/zoom-linux: Added (Video conferencing client). office/onlyoffice-desktopeditors: Updated for version 5.2.8. perl/perl-EV: Updated for version 4.25. perl/perl-File-Which: Updated for version 1.23. perl/perl-Math-MPFR: Updated for version 4.06. perl/perl-Mojolicious: Updated for version 8.11. perl/perl-Sidef: Updated for version 3.60. perl/perl-Text-CSV: Updated for version 1.99. perl/perl-Text-CSV_XS: Updated for version 1.38. perl/perl-YAML-LibYAML: Updated for version 0.76. python/artifacts: Updated for version 20181213. python/backports.lzma: Updated for version 0.0.13. python/biplist: Added (plist parser/generator module). python/bleach: Updated for version 3.1.0. python/construct: Updated for version 2.9.45. python/dfdatetime: Updated for version 20181025. python/dtfabric: Added (Python library). python/entrypoints: Updated for version 0.3. python/pefile: Updated for version 2018.8.8. python/python-fonttools: Updated for version 3.36.0. python/python3-wrapt: Updated for version 1.11.0. python/typed_ast: Updated for version 1.2.0. ruby/rubygem-parallel: Updated for version 1.13.0. ruby/rubygem-rubocop: Updated for version 0.63.0. ruby/rubygem-ruumba: Updated for version 0.1.9. system/ansible: Updated for version 2.7.6. system/atop: Updated for version 2.4.0. system/chronograf: Updated for version 1.7.7. system/dosbox-dev: Updated for version 0.74.r4180. system/duply: Added (Front end for duplicity). system/fish: Added (Friendly Interactive Shell). system/isdct: Updated for version 3.0.17. system/kbfs: Updated for version 2.13.1_20190115203650. system/letsencrypt: Update README. system/nvme-cli: Updated for version 1.7. system/rhash: Updated for version 1.3.7. system/sandbox: Updated for version 2.15. system/sleuthkit: Updated for version 4.6.5. system/telegraf: Updated for version 1.9.2. system/thermald: Update README. system/worker: Updated for version 3.15.3. system/zsh-completions: Updated for version 0.30.0. +--------------------------+ -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From sbolokanov at abv.bg Sat Jan 19 20:03:14 2019 From: sbolokanov at abv.bg (=?utf-8?B?0KHQuNC80L7QvdGK4oCT0KHQtdCy0LDRgA==?= =?utf-8?B?0Yog0JHQvtC70L7QutCw0L3QvtCy0Yo=?=) Date: Sat, 19 Jan 2019 22:03:14 +0200 (EET) Subject: [Slackbuilds-users] qbittorrent version bump Message-ID: <1053081975.1417954.1547928195002@nm53.abv.bg> Let's bump qbittorrent to 3.3.16? It has some rather nice fixes: v3.3.16 changelog: BUGFIX: Better memory footprint when using libtorrent 1.1.x. The cache is turned off by default( 0 (disabled) value in the settings). The value -1 (auto) makes it use 1/8 of your RAM. (sledgehammer999) BUGFIX: Skip user input events when adding torrent. Closes #7327. (glassez) BUGFIX: Avoid memory leak in the speed graph. (Chocobo1) Regards, -- ?. ?. ?????????? -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave at tty1.uk Sat Jan 19 20:15:35 2019 From: dave at tty1.uk (Dave Woodfall) Date: Sat, 19 Jan 2019 20:15:35 +0000 Subject: [Slackbuilds-users] qbittorrent version bump In-Reply-To: <1053081975.1417954.1547928195002@nm53.abv.bg> References: <1053081975.1417954.1547928195002@nm53.abv.bg> Message-ID: <20190119201535.GB21483@blackholeuniverse.ru> On Saturday 19 January 2019 22:03, ????????????? ?????????? put forth the proposition: > > > Let's bump qbittorrent to 3.3.16? > > It has some rather nice fixes: > > > v3.3.16 changelog: > BUGFIX: Better memory footprint when using libtorrent 1.1.x. The cache is turned off by default( 0 (disabled) value in the settings). The value -1 (auto) makes it use 1/8 of your RAM. (sledgehammer999) BUGFIX: Skip user input events when adding torrent. Closes #7327. (glassez) BUGFIX: Avoid memory leak in the speed graph. (Chocobo1) Regards, > -- ?. ?. ?????????? Qbittorrent is fixed at 3.3.15 because that is the last version that will build with qt4. You probably want to use qbittorrent-qt5, which is at 4.1.4 Dave -- You may have heard that a dean is to faculty as a hydrant is to a dog. -- Alfred Kahn -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From sbolokanov at abv.bg Sat Jan 19 20:41:29 2019 From: sbolokanov at abv.bg (=?utf-8?B?0KHQuNC80L7QvdGK4oCT0KHQtdCy0LDRgA==?= =?utf-8?B?0Yog0JHQvtC70L7QutCw0L3QvtCy0Yo=?=) Date: Sat, 19 Jan 2019 22:41:29 +0200 (EET) Subject: [Slackbuilds-users] qbittorrent version bump In-Reply-To: <20190119201535.GB21483@blackholeuniverse.ru> References: <1053081975.1417954.1547928195002@nm53.abv.bg> <20190119201535.GB21483@blackholeuniverse.ru> Message-ID: <2002768340.1418668.1547930489665@nm53.abv.bg> 3.3.16 builds fine here with no qt5. -- ?. ?. ?????????? >-------- ?????????? ????? -------- >??: Dave Woodfall dave at tty1.uk >???????: Re: [Slackbuilds-users] qbittorrent version bump >??: slackbuilds-users at slackbuilds.org >????????? ??: 19.01.2019 22:15 On Saturday 19 January 2019 22:03, ????????????? ?????????? sbolokanov at abv.bg > put forth the proposition: > > > Let's bump qbittorrent to 3.3.16? > > It has some rather nice fixes: > > > v3.3.16 changelog: > BUGFIX: Better memory footprint when using libtorrent 1.1.x. The cache is turned off by default( 0 (disabled) value in the settings). The value -1 (auto) makes it use 1/8 of your RAM. (sledgehammer999) BUGFIX: Skip user input events when adding torrent. Closes #7327. (glassez) BUGFIX: Avoid memory leak in the speed graph. (Chocobo1) Regards, > -- ?. ?. ?????????? Qbittorrent is fixed at 3.3.15 because that is the last version that will build with qt4. You probably want to use qbittorrent-qt5, which is at 4.1.4 Dave -- You may have heard that a dean is to faculty as a hydrant is to a dog. -- Alfred Kahn -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave at tty1.uk Sat Jan 19 20:53:25 2019 From: dave at tty1.uk (Dave Woodfall) Date: Sat, 19 Jan 2019 20:53:25 +0000 Subject: [Slackbuilds-users] qbittorrent version bump In-Reply-To: <2002768340.1418668.1547930489665@nm53.abv.bg> References: <1053081975.1417954.1547928195002@nm53.abv.bg> <20190119201535.GB21483@blackholeuniverse.ru> <2002768340.1418668.1547930489665@nm53.abv.bg> Message-ID: <20190119205325.GC21483@blackholeuniverse.ru> On Saturday 19 January 2019 22:41, ????????????? ?????????? put forth the proposition: > 3.3.16 builds fine here with no qt5. > > -- ?. ?. ?????????? > Strange. I'll check it out, but the reason I made a qt5 version is because it failed to build after 3.3.15. Dave > > > > > > > > >-------- ?????????? ????? -------- > > >??: Dave Woodfall dave at tty1.uk > > >???????: Re: [Slackbuilds-users] qbittorrent version bump > > >??: slackbuilds-users at slackbuilds.org > > >????????? ??: 19.01.2019 22:15 > > > On Saturday 19 January 2019 22:03, > > ????????????? ?????????? sbolokanov at abv.bg > put forth the proposition: > > > > > > > > > Let's bump qbittorrent to 3.3.16? > > > > > > It has some rather nice fixes: > > > > > > > > > v3.3.16 changelog: > > > BUGFIX: Better memory footprint when using libtorrent 1.1.x. The cache is turned off by default( 0 (disabled) value in the settings). The value -1 (auto) makes it use 1/8 of your RAM. (sledgehammer999) BUGFIX: Skip user input events when adding torrent. Closes #7327. (glassez) BUGFIX: Avoid memory leak in the speed graph. (Chocobo1) Regards, > > > -- ?. ?. ?????????? > > > > Qbittorrent is fixed at 3.3.15 because that is the last version that > > will build with qt4. > > > > You probably want to use qbittorrent-qt5, which is at 4.1.4 > > > > Dave -- Once ... in the wilds of Afghanistan, I lost my corkscrew, and we were forced to live on nothing but food and water for days. -- W. C. Fields, "My Little Chickadee" -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From dave at tty1.uk Sat Jan 19 21:20:30 2019 From: dave at tty1.uk (Dave Woodfall) Date: Sat, 19 Jan 2019 21:20:30 +0000 Subject: [Slackbuilds-users] qbittorrent version bump In-Reply-To: <20190119205325.GC21483@blackholeuniverse.ru> References: <1053081975.1417954.1547928195002@nm53.abv.bg> <20190119201535.GB21483@blackholeuniverse.ru> <2002768340.1418668.1547930489665@nm53.abv.bg> <20190119205325.GC21483@blackholeuniverse.ru> Message-ID: <20190119212030.GD21483@blackholeuniverse.ru> On Saturday 19 January 2019 20:53, Dave Woodfall put forth the proposition: > On Saturday 19 January 2019 22:41, > ????????????? ?????????? put forth the proposition: > > 3.3.16 builds fine here with no qt5. > > > > -- ?. ?. ?????????? > > > > > Strange. I'll check it out, but the reason I made a qt5 version is > because it failed to build after 3.3.15. It's fine. Updated and pushed. On a side note, it looks like sourceforge have messed about with direct download links again, so I've switched to github with this. Dave > > > > >-------- ?????????? ????? -------- > > > > >??: Dave Woodfall dave at tty1.uk > > > > >???????: Re: [Slackbuilds-users] qbittorrent version bump > > > > >??: slackbuilds-users at slackbuilds.org > > > > >????????? ??: 19.01.2019 22:15 > > > > > > On Saturday 19 January 2019 22:03, > > > > ????????????? ?????????? sbolokanov at abv.bg > put forth the proposition: > > > > > > > > > > > > > > > Let's bump qbittorrent to 3.3.16? > > > > > > > > > > It has some rather nice fixes: > > > > > > > > > > > > > > > v3.3.16 changelog: > > > > > BUGFIX: Better memory footprint when using libtorrent 1.1.x. The cache is turned off by default( 0 (disabled) value in the settings). The value -1 (auto) makes it use 1/8 of your RAM. (sledgehammer999) BUGFIX: Skip user input events when adding torrent. Closes #7327. (glassez) BUGFIX: Avoid memory leak in the speed graph. (Chocobo1) Regards, > > > > > -- ?. ?. ?????????? > > > > > > > > Qbittorrent is fixed at 3.3.15 because that is the last version that > > > > will build with qt4. > > > > > > > > You probably want to use qbittorrent-qt5, which is at 4.1.4 > > > > > > > > Dave > > -- > > Once ... in the wilds of Afghanistan, I lost my corkscrew, and we were > forced to live on nothing but food and water for days. > -- W. C. Fields, "My Little Chickadee" > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > -- Twenty Percent of Zero is Better than Nothing. -- Walt Kelly -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: From pc_warner at yahoo.com Sun Jan 20 05:22:00 2019 From: pc_warner at yahoo.com (Phillip Warner) Date: Sun, 20 Jan 2019 05:22:00 +0000 (UTC) Subject: [Slackbuilds-users] CEGUI and xrdp need new maintainers References: <888071131.505775.1547961720900.ref@mail.yahoo.com> Message-ID: <888071131.505775.1547961720900@mail.yahoo.com> All, I have not used CEGUI and xrdp in a long time, and the respective slackBuilds are in need of new maintainers.? Is anybody interested? - CEGUI is now at 0.8.7. - xrdp, currently at 0.9.9, is now roughly releasing on a four month cycle. Warmest Regards, Phillip Warner -------------- next part -------------- An HTML attachment was scrubbed... URL: From dpross1100 at msn.com Sun Jan 20 12:31:44 2019 From: dpross1100 at msn.com (Daniel Prosser) Date: Sun, 20 Jan 2019 12:31:44 +0000 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed Message-ID: ffmpeg is listed as an optional dependency for ZoneMinder, but in a clean Slackware64-14.2 container, if ffmpeg isn't installed, I get the attached errors. Should ffmpeg be listed as a required dependency now? Thanks, Dan -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: error.log URL: From psychi2009 at gmail.com Sun Jan 20 14:05:19 2019 From: psychi2009 at gmail.com (psychi) Date: Sun, 20 Jan 2019 22:05:19 +0800 Subject: [Slackbuilds-users] ReText broken? In-Reply-To: <4f55e730-ff80-ad66-91a8-9178929508a0@slackbuilds.org> References: <10e95b13-1f61-595d-e904-05fe95f5e311@slint.fr> <41a95475-1562-b327-7e39-67db08e92a73@slackbuilds.org> <4f55e730-ff80-ad66-91a8-9178929508a0@slackbuilds.org> Message-ID: Oh, sorry for responding so late. It should be a hard dependency while the author did not mention it on its project page: https://github.com/retext-project/retext It is also authored by one of the authors of ReText: https://github.com/mitya57/python-markdown-math Cheers On Thu, 10 Jan 2019 at 20:41, Willy Sudiarto Raharjo < willysr at slackbuilds.org> wrote: > > From the setup.py file, markdown is a hard dependency. > > > > https://github.com/retext-project/retext/blob/master/setup.py > > I added markdown already in my branch > > > -- > Willy Sudiarto Raharjo > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -- -- *[PGP key]* 04FD A83E F2D3 1DAE 43AC CCC4 F04F AA0B 9F11 6EF5 - If I did not reply to you, please find another email address of mine. Cheers. -- -------------- next part -------------- An HTML attachment was scrubbed... URL: From zakame at zakame.net Sun Jan 20 12:12:43 2019 From: zakame at zakame.net (Zak B. Elep) Date: Sun, 20 Jan 2019 20:12:43 +0800 Subject: [Slackbuilds-users] virt-viewer needs updating In-Reply-To: <3bb0f67b-4a5c-971f-7953-bbca899e55f4@zakame.net> References: <1547755735.339120.1637403824.05B3C5E3@webmail.messagingengine.com> <3bb0f67b-4a5c-971f-7953-bbca899e55f4@zakame.net> Message-ID: <2e9cf893-8e14-e9e0-a466-348e8062ee33@zakame.net> On 1/18/19 12:09 PM, Zak B. Elep wrote: > Hi! > > On 1/18/19 4:08 AM, Alexander Verbovetsky wrote: >> Hello, >> >> the virt-viewer SlackBuild is broken due to a bug fixed in version 7.0. >> 3 weeks ago I sent the below message to the maintainer but received no >> answer. > Sorry, I was on holiday and I think this one slipped by past me.? Let me > post virt-viewer-7.0 update today.? Thanks! It is now updated in git, thanks to willysr for committing! https://git.slackbuilds.org/slackbuilds/commit/?id=ba59b8fbf Cheers, Zak -- Zak B. Elep || zakame.net 1486 7957 454D E529 E4F1 F75E 5787 B1FD FA53 851D F57D 3713 E782 E2B2 D0DA A5F0 E14D EE0C FFC3 A672 From willysr at slackbuilds.org Sun Jan 20 23:56:13 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Mon, 21 Jan 2019 06:56:13 +0700 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: References: Message-ID: > ffmpeg is listed as an optional dependency for ZoneMinder, but in a > clean Slackware64-14.2 container, if ffmpeg isn't installed, I get the > attached errors. Should ffmpeg be listed as a required dependency now? Thanks Dan I have added ffmpeg into the REQUIRES line now Thanks -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From jgraham at compukix.net Mon Jan 21 02:40:27 2019 From: jgraham at compukix.net (Jason Graham) Date: Sun, 20 Jan 2019 21:40:27 -0500 Subject: [Slackbuilds-users] python-django and legacy version Message-ID: Hi, All of the 1.x versions of django have been EOL'd, except for version 1.11 which will receive support until 2020 and will be the last of the 1.x series. The 2.x versions are the latest going forward. The current SBo django 1.x slackbuilds are: ?? python-django 1.10 ?? python-django-legacy 1.8.17 which are EOL'd. I've contacted the maintainer of python-django about updating to the latest 1.11 version and will wait to hear back. After looking at it, it makes sense to probably roll the two current 1.x versions into a single slackbuild, i.e., python-django-legacy. We have python3-django which is at 2.1.5 (only supports python 3). django 1.11 supports python 2 and 3, so I'm proposing slackbuilds for ?? python-django-legacy 1.11.18 ?? python3-django-legacy 1.11.18 in place of the current python-django and python-django-legacy ones. Each of the current slackbuilds have different maintainers, so I'm not sure of the best way to proceed. Any thoughts? Thanks, Jason From fernando.lopezjr at gmail.com Mon Jan 21 15:21:32 2019 From: fernando.lopezjr at gmail.com (Fernando Lopez) Date: Mon, 21 Jan 2019 08:21:32 -0700 Subject: [Slackbuilds-users] is protobuf a dependency for osgearth? Message-ID: is protobuf is a dependency for osgearth? can you guys confirm? if so can it be added to the dependency on the sbo website? thank you. -- ------------ Regards, Fernando Lopez Jr. -------------- next part -------------- An HTML attachment was scrubbed... URL: From chris.willing at linux.com Mon Jan 21 22:35:30 2019 From: chris.willing at linux.com (Christoph Willing) Date: Tue, 22 Jan 2019 08:35:30 +1000 Subject: [Slackbuilds-users] is protobuf a dependency for osgearth? In-Reply-To: References: Message-ID: <140d749e-bb02-9e30-3737-dcc530d82b71@linux.com> On 22/1/19 1:21 am, Fernando Lopez wrote: > > is protobuf is a dependency for osgearth? can you guys confirm? if so > can it be added to the dependency on the sbo website? protobuf is already listed as optional dependency in the README, along with osgQt, poco and rocksdb. chris From fernando.lopezjr at gmail.com Mon Jan 21 22:48:07 2019 From: fernando.lopezjr at gmail.com (Fernando Lopez) Date: Mon, 21 Jan 2019 15:48:07 -0700 Subject: [Slackbuilds-users] is protobuf a dependency for osgearth? In-Reply-To: <140d749e-bb02-9e30-3737-dcc530d82b71@linux.com> References: <140d749e-bb02-9e30-3737-dcc530d82b71@linux.com> Message-ID: Chris, yes, you are correct. they are listed on the README, what i meant is that protobuf is listed as optional and i am pretty sure it is a required requirement. in my case i had to build protobuf for osgearth to compile. On Mon, Jan 21, 2019 at 3:35 PM Christoph Willing wrote: > On 22/1/19 1:21 am, Fernando Lopez wrote: > > > > is protobuf is a dependency for osgearth? can you guys confirm? if so > > can it be added to the dependency on the sbo website? > > protobuf is already listed as optional dependency in the README, along > with osgQt, poco and rocksdb. > > chris > -- ------------ Regards, Fernando Lopez Jr. -------------- next part -------------- An HTML attachment was scrubbed... URL: From chris.willing at linux.com Tue Jan 22 00:52:37 2019 From: chris.willing at linux.com (Christoph Willing) Date: Tue, 22 Jan 2019 10:52:37 +1000 Subject: [Slackbuilds-users] is protobuf a dependency for osgearth? In-Reply-To: References: <140d749e-bb02-9e30-3737-dcc530d82b71@linux.com> Message-ID: <0f63760e-9dec-492e-a77e-3b7d327d6380@linux.com> On 22/1/19 8:48 am, Fernando Lopez wrote: > Chris, > > ??? yes, you are correct. they are listed on the README, what i meant is > that protobuf is listed as optional and i am pretty sure it is a > required requirement. in my case i had to build protobuf for osgearth to > compile. > I just rebuilt osgEarth in both a clean VM and my daily desktop without protobuf; both built without problem. A simple test on the desktop worked OK - can't really test shaders in the VM. My conclusion is that protobuf is optional. Nevertheless I tend toward SlackBuilds that are feature rich, rather than minimalist. Therefore if you care to demonstrate or claim that you have a use case requiring or benefiting greatly from protobuf's inclusion, I will add it at the next update of osgEarth. chris From dpross1100 at msn.com Tue Jan 22 04:46:22 2019 From: dpross1100 at msn.com (Daniel Prosser) Date: Tue, 22 Jan 2019 04:46:22 +0000 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: References: Message-ID: Thanks Willy. A couple more notes/issues/fixes for this new version: 1. By default, ZoneMinder now saves events as mp4 videos instead of frames. For this to work, x264 and libmp4v2 must be installed prior to building. It's still possible to just use image frames as before, but I think x264 and libmp4v2 need to be at least optional dependencies. Personally, I think they should be required, as otherwise the user will have to switch to saving image frames only. 2. Even with x264 and libmp4v2 installed, ZoneMinder was still unable to save videos for me. I had to apply the attached patch for it to work. I'm not really sure why that's the case, since I didn't find any other reports of it not working as is. GenoBob, perhaps you and/or any other Slackware ZoneMinder users can report whether it works for you (and add this patch to the SlackBuild if appropriate)? 3. This version stores events and other data in ZM_CONTENTDIR, which defaults to /var/lib/zoneminder. However, the SlackBuild script doesn't create this directory, so there are initially errors when running until the user manually creates it. (It needs to be owned by apache:apache). I recommend having the SlackBuild script create this directory as part of the package, and make it a build option so it can be changed at build time. Don't take these comments as a criticism. I am really grateful for the script and I'm glad that it's basically working for me now. I was actually procrastinating upgrading to 1.32.x because of all the changes. I just want to help make the installation process as smooth as possible for others. Dan On Mon, Jan 21, 2019 at 06:56:13AM +0700, Willy Sudiarto Raharjo wrote: > > ffmpeg is listed as an optional dependency for ZoneMinder, but in a > > clean Slackware64-14.2 container, if ffmpeg isn't installed, I get the > > attached errors. Should ffmpeg be listed as a required dependency now? > > Thanks Dan > > I have added ffmpeg into the REQUIRES line now > > Thanks > > > -- > Willy Sudiarto Raharjo > -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: fix_video_file_format.patch URL: From willysr at slackbuilds.org Tue Jan 22 15:15:09 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Tue, 22 Jan 2019 22:15:09 +0700 Subject: [Slackbuilds-users] RFC: MySQL Workbench (current) Message-ID: Hi I have just made an update to mysql-workbench and it's still working in progress. It built and works normally, but i may have missed some features or dependencies, so if anyone is interested to help and try, you can check this branch https://git.slackbuilds.org/slackbuilds/log/?h=mysql-workbench-wip NOTE: I tested that one on -current and x86_64 only. I haven't tried building it on x86 nor in stable. I was targeting for next Slackware release, so it may not be backported to -stable (14.2). Thanks -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From fernando.lopezjr at gmail.com Tue Jan 22 15:42:44 2019 From: fernando.lopezjr at gmail.com (Fernando Lopez) Date: Tue, 22 Jan 2019 08:42:44 -0700 Subject: [Slackbuilds-users] RFC: MySQL Workbench (current) In-Reply-To: References: Message-ID: thank you so much! i started to work on this my self but never got to finish it. On Tue, Jan 22, 2019 at 8:15 AM Willy Sudiarto Raharjo < willysr at slackbuilds.org> wrote: > Hi > > I have just made an update to mysql-workbench and it's still working in > progress. It built and works normally, but i may have missed some > features or dependencies, so if anyone is interested to help and try, > you can check this branch > https://git.slackbuilds.org/slackbuilds/log/?h=mysql-workbench-wip > > NOTE: > I tested that one on -current and x86_64 only. I haven't tried building > it on x86 nor in stable. I was targeting for next Slackware release, so > it may not be backported to -stable (14.2). > > Thanks > > > -- > Willy Sudiarto Raharjo > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -- ------------ Regards, Fernando Lopez Jr. -------------- next part -------------- An HTML attachment was scrubbed... URL: From fellype at gmail.com Wed Jan 23 18:53:49 2019 From: fellype at gmail.com (Fellype) Date: Wed, 23 Jan 2019 16:53:49 -0200 Subject: [Slackbuilds-users] Compatibility of build scripts for Slackware64 + multilib at SBo Message-ID: Hi all, I have a question: If I write a Slackbuild script on a machine that has installed Slackware64 (stable, of course) + multilib, will the script be compatible with SBo? I'm asking this because I'm the maintainer of some build scripts and I'm considering to move all the machines I've Slackware installed to Slackware64 + multilib. So I'll not have a pure 32/64 bits machine to make tests and I don't want to provide/submit scripts that works only for me. I tried to find the answer for this question in the SBo's FAQ and mail list archives, but it was not much clear for me... Thanks in advance and best regards. Fellype -------------- next part -------------- An HTML attachment was scrubbed... URL: From joshuakwood at gmail.com Wed Jan 23 19:29:11 2019 From: joshuakwood at gmail.com (JK Wood) Date: Wed, 23 Jan 2019 13:29:11 -0600 Subject: [Slackbuilds-users] Compatibility of build scripts for Slackware64 + multilib at SBo In-Reply-To: References: Message-ID: On Wed, Jan 23, 2019, 12:54 Fellype Hi all, > > I have a question: > If I write a Slackbuild script on a machine that has installed > Slackware64 (stable, of course) + multilib, will the script be compatible > with SBo? > > I'm asking this because I'm the maintainer of some build scripts and I'm > considering to move all the machines I've Slackware installed to > Slackware64 + multilib. So I'll not have a pure 32/64 bits machine to make > tests and I don't want to provide/submit scripts that works only for me. > I tried to find the answer for this question in the SBo's FAQ and mail > list archives, but it was not much clear for me... > > Thanks in advance and best regards. > > Fellype > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ I use two virtual machines for testing my builds that are otherwise clean, and reset the images after testing. There are a lot of advantages to doing it this way. Thanks, JK -------------- next part -------------- An HTML attachment was scrubbed... URL: From ricardo at palmtx.com.ar Wed Jan 23 22:42:43 2019 From: ricardo at palmtx.com.ar (Ricardo J. Barberis) Date: Wed, 23 Jan 2019 19:42:43 -0300 Subject: [Slackbuilds-users] Compatibility of build scripts for Slackware64 + multilib at SBo In-Reply-To: References: Message-ID: <201901231942.43660.ricardo@palmtx.com.ar> El Mi?rcoles 23/01/2019 a las 16:29, JK Wood escribi?: > On Wed, Jan 23, 2019, 12:54 Fellype > Hi all, > > > > I have a question: > > If I write a Slackbuild script on a machine that has installed > > Slackware64 (stable, of course) + multilib, will the script be compatible > > with SBo? > > > > I'm asking this because I'm the maintainer of some build scripts and I'm > > considering to move all the machines I've Slackware installed to > > Slackware64 + multilib. So I'll not have a pure 32/64 bits machine to > > make tests and I don't want to provide/submit scripts that works only for > > me. I tried to find the answer for this question in the SBo's FAQ and > > mail list archives, but it was not much clear for me... > > > > Thanks in advance and best regards. > > > > Fellype > > I use two virtual machines for testing my builds that are otherwise clean, > and reset the images after testing. There are a lot of advantages to doing > it this way. > > Thanks, > JK I'm doing the same but with docker. I created 2 docker images for slackware and slackware64, based on vbatts' dockerfiles [0], there's some info in my github [1] if anyone is interested in using them. There's also the script slack-docker.sh with which I run the containers, by default they're ephemeral but there's an option (--no-rm) to make them persist so I can keep the images uptodate. [0] https://github.com/vbatts/slackware-docker [1] https://github.com/richarson/slackware-docker Cheers, -- Ricardo J. Barberis Usuario Linux N? 250625: http://counter.li.org/ Usuario LFS N? 5121: http://www.linuxfromscratch.org/ Senior SysAdmin / IT Architect - www.DonWeb.com From dpross1100 at msn.com Fri Jan 25 05:53:02 2019 From: dpross1100 at msn.com (Daniel Prosser) Date: Fri, 25 Jan 2019 05:53:02 +0000 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: References: Message-ID: GenoBob, One final (I think) note: if you want to use the ZoneMinder API, you also need to have php-apcu installed. It would be good to document these things so that users don't have to dig to find it. Dan On Tue, Jan 22, 2019 at 04:46:22AM +0000, Daniel Prosser wrote: > Thanks Willy. A couple more notes/issues/fixes for this new version: > > 1. By default, ZoneMinder now saves events as mp4 videos instead of > frames. For this to work, x264 and libmp4v2 must be installed prior to > building. It's still possible to just use image frames as before, but I > think x264 and libmp4v2 need to be at least optional dependencies. > Personally, I think they should be required, as otherwise the user will > have to switch to saving image frames only. > > 2. Even with x264 and libmp4v2 installed, ZoneMinder was still unable to > save videos for me. I had to apply the attached patch for it to work. > I'm not really sure why that's the case, since I didn't find any other > reports of it not working as is. GenoBob, perhaps you and/or any other > Slackware ZoneMinder users can report whether it works for you (and add > this patch to the SlackBuild if appropriate)? > > 3. This version stores events and other data in ZM_CONTENTDIR, which > defaults to /var/lib/zoneminder. However, the SlackBuild script doesn't > create this directory, so there are initially errors when running until > the user manually creates it. (It needs to be owned by apache:apache). I > recommend having the SlackBuild script create this directory as part of the > package, and make it a build option so it can be changed at build time. > > Don't take these comments as a criticism. I am really grateful for the > script and I'm glad that it's basically working for me now. I was actually > procrastinating upgrading to 1.32.x because of all the changes. I just > want to help make the installation process as smooth as possible for > others. > > Dan > > On Mon, Jan 21, 2019 at 06:56:13AM +0700, Willy Sudiarto Raharjo wrote: > > > ffmpeg is listed as an optional dependency for ZoneMinder, but in a > > > clean Slackware64-14.2 container, if ffmpeg isn't installed, I get the > > > attached errors. Should ffmpeg be listed as a required dependency now? > > > > Thanks Dan > > > > I have added ffmpeg into the REQUIRES line now > > > > Thanks > > > > > > -- > > Willy Sudiarto Raharjo > > > > > > --- src/zm_event.cpp 2019-01-21 23:17:19.881961455 -0500 > +++ src/zm_event.cpp.new 2019-01-21 23:17:38.452315254 -0500 > @@ -196,7 +196,7 @@ > > if ( monitor->GetOptVideoWriter() != 0 ) { > snprintf(video_name, sizeof(video_name), "%" PRIu64 "-%s", id, "video.mp4"); > - snprintf(video_file, sizeof(video_file), staticConfig.video_file_format, path, video_name); > + snprintf(video_file, sizeof(video_file), "%s/%s", path, video_name); > Debug(1,"Writing video file to %s", video_file ); > > /* X264 MP4 video writer */ > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > From fellype at gmail.com Fri Jan 25 11:30:46 2019 From: fellype at gmail.com (Fellype) Date: Fri, 25 Jan 2019 09:30:46 -0200 Subject: [Slackbuilds-users] Compatibility of build scripts for Slackware64 + multilib at SBo In-Reply-To: <201901231942.43660.ricardo@palmtx.com.ar> References: <201901231942.43660.ricardo@palmtx.com.ar> Message-ID: Em qua, 23 de jan de 2019 ?s 20:42, Ricardo J. Barberis < ricardo at palmtx.com.ar> escreveu: > El Mi?rcoles 23/01/2019 a las 16:29, JK Wood escribi?: > > On Wed, Jan 23, 2019, 12:54 Fellype > > Hi all, > > > > > > I have a question: > > > If I write a Slackbuild script on a machine that has installed > > > Slackware64 (stable, of course) + multilib, will the script be > compatible > > > with SBo? > > > > > > I'm asking this because I'm the maintainer of some build scripts and > I'm > > > considering to move all the machines I've Slackware installed to > > > Slackware64 + multilib. So I'll not have a pure 32/64 bits machine to > > > make tests and I don't want to provide/submit scripts that works only > for > > > me. I tried to find the answer for this question in the SBo's FAQ and > > > mail list archives, but it was not much clear for me... > > > > > > Thanks in advance and best regards. > > > > > > Fellype > > > > I use two virtual machines for testing my builds that are otherwise > clean, > > and reset the images after testing. There are a lot of advantages to > doing > > it this way. > > > > Thanks, > > JK > > I'm doing the same but with docker. > > I created 2 docker images for slackware and slackware64, based on vbatts' > dockerfiles [0], there's some info in my github [1] if anyone is > interested > in using them. > > There's also the script slack-docker.sh with which I run the containers, > by > default they're ephemeral but there's an option (--no-rm) to make them > persist so I can keep the images uptodate. > > > [0] https://github.com/vbatts/slackware-docker > [1] https://github.com/richarson/slackware-docker > > > I know that virtual machines can be used to test build scripts, but it is not a good alternative for me because the machines I use are underpowered. And use a VM to build software in such conditions is not a nice hobby. Anyway, I'll take a look on docker alternative in order to know its performance. Thank you and best regards. Fellype -------------- next part -------------- An HTML attachment was scrubbed... URL: From willysr at slackbuilds.org Fri Jan 25 13:33:46 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Fri, 25 Jan 2019 20:33:46 +0700 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: References: Message-ID: <74b5c2e4-94be-8047-1c44-0dad1c5e3af6@slackbuilds.org> > One final (I think) note: if you want to use the ZoneMinder API, you also > need to have php-apcu installed. It would be good to document these things > so that users don't have to dig to find it. >> Thanks Willy. A couple more notes/issues/fixes for this new version: >> >> 1. By default, ZoneMinder now saves events as mp4 videos instead of >> frames. For this to work, x264 and libmp4v2 must be installed prior to >> building. It's still possible to just use image frames as before, but I >> think x264 and libmp4v2 need to be at least optional dependencies. >> Personally, I think they should be required, as otherwise the user will >> have to switch to saving image frames only. >> >> 2. Even with x264 and libmp4v2 installed, ZoneMinder was still unable to >> save videos for me. I had to apply the attached patch for it to work. >> I'm not really sure why that's the case, since I didn't find any other >> reports of it not working as is. GenoBob, perhaps you and/or any other >> Slackware ZoneMinder users can report whether it works for you (and add >> this patch to the SlackBuild if appropriate)? >> >> 3. This version stores events and other data in ZM_CONTENTDIR, which >> defaults to /var/lib/zoneminder. However, the SlackBuild script doesn't >> create this directory, so there are initially errors when running until >> the user manually creates it. (It needs to be owned by apache:apache). I >> recommend having the SlackBuild script create this directory as part of the >> package, and make it a build option so it can be changed at build time. >> >> Don't take these comments as a criticism. I am really grateful for the >> script and I'm glad that it's basically working for me now. I was actually >> procrastinating upgrading to 1.32.x because of all the changes. I just >> want to help make the installation process as smooth as possible for >> others. Hi Dan Thanks for this investigations would you mind sending me the patch for this improvements? -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From ml at mareichelt.com Fri Jan 25 19:58:20 2019 From: ml at mareichelt.com (Markus Reichelt) Date: Fri, 25 Jan 2019 20:58:20 +0100 Subject: [Slackbuilds-users] Tahoe-LAFS users Message-ID: <20190125195820.GA9383@pc21.mareichelt.com> Do we have any? ... just because. I'm asking around for a reason. Who would like to take it all over? The dep frenzy, the combo frenzy, the "my app needs the frenzy you are maintaining and it's blue, your's just tainted, I win, please fuckin update it TIA." et al. Yeah. Be strong. SOSF, and all that. Anyway, ... you get the idea, and have my blessing. You WIN!11!! PS Yeah yeah, tagline was cool in 2012. But now ... it's hard to fight the irony, so why brother. -- The Tahoe-LAFS spirit. From willysr at slackbuilds.org Sat Jan 26 01:14:57 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 26 Jan 2019 08:14:57 +0700 Subject: [Slackbuilds-users] Updates - 20190126.1 Message-ID: <60884005-55d0-ae7a-b383-6704eb717d39@slackbuilds.org> Hello everyone, Over the year, we have seen our community is growing constantly and many (new) maintainers stepping up to keep our repository up to date with latest one available in the public. We are happy with the situation and we think we can improve better by adding more admins on our side. We have been monitoring some of the active maintainers and we decided to invite some of them to join us here as admins and today, i'm announcing TWO (yes, two, not just one) new admins who will be joining us. They are B. Watson (aka Urchlay in IRC) and Andrew Clemons. With the addition of two new admins, We do hope that we can do the same as we did three years ago, which was releasing 14.2 repository in the same day as Slackware 14.2 gets released. We still don't know when will Slackware 15.0 gets released, but when the time comes, we are trying our best to make sure it's ready as well. Sat Jan 26 00:54:48 UTC 2019 academic/fet Updated for version 5.37.5. academic/ncbi-blast+: Updated for version 2.8.1. academic/zotero: Updated for version 5.0.60. audio/audacity: Added an incompatibility note to the README. business/stansoft: Updated for version 7.15. desktop/CurseTheWeather: Removed (No longer maintained upstream). desktop/gtkhash: Updated for version 1.2. desktop/rofi: Update README. development/SQLAlchemy: Updated for version 1.2.16. development/geany: Fix VERSION. development/hub: Updated for version 2.7.1. development/kakoune: Updated for version 2019.01.20. development/kotlin: Updated for version 1.3.20. development/psycopg2: Updated for version 2.7.7. development/tiled: Updated for version 1.2.2. games/picodrive: Updated for version 1.93. gis/rasterio: Updated for version 1.0.14. ham/xlog: Updated for version 2.0.17 ilbraries/liburcu: Updated for version 0.10.2. libraries/antlr4: Added (language tool). libraries/libchewing: Updated for version 0.5.1 + new maintainer. libraries/libexe: Added (libYAL EXE library). libraries/libfsapfs: Added (libYAL NTFS library). libraries/libfsntf: Updated for version 20190104. libraries/libfwnt: Updated for version 20181215. libraries/libfwsi: Updated for version 20181215. libraries/liblnk: Updated for version 20181120. libraries/libmsiecf: Updated for version 20181227. libraries/libolecf: Updated for version 20181125. libraries/libqcow: Updated for version 20181227. libraries/libscca: Updated for version 20181128. libraries/libsigscan: Updated for version 20181215. libraries/libsmdev: Updated for version 20181227. libraries/libsmraw: Updated for version 20181227. libraries/libvshadow: Updated for version 20190112. libraries/libvslvm: Updated for version 20181227. libraries/libwrc: Added (libYAL WRC library). libraries/skalibs: Added (general purpose C libraries). misc/asterixInspector: Updated for version 0.12.3. misc/sbo-templates: Updated for version 1.0.3. network/asciinema: Updated for version 2.0.2. network/bro: Updated for version 2.6.1. network/discord: Update to 0.0.8 network/dovecot-pigeonhole: Updated for version 0.5.4. network/dovecot: Updated for version 2.3.4. network/guacamole-client: Updated for version 1.0.0. network/guacamole-server: Updated for version 1.0.0. network/open-iscsi: Added (RFC3720 iSCSI Initiator). network/open-isns: Added (Internet Storage Name Service). network/palemoon-bin: Updated for version 28.3.1. network/palemoon: Updated for version 28.3.1. network/postfix: Updated for version 3.3.2. network/prosody-mod-http-upload: Updated for version hg3446. network/prosody-mod-smacks: Updated for version hg3450. network/qbittorrent: Update to 3.3.16 network/sendxmpp: Added (send xmpp messages from the command line). network/telegram: Updated for version 1.5.8. network/tor: Updated for version 0.3.5.7. network/youtube-dl: Updated for version 2019.01.17. network/zoom-linux: Updated for version 2.7.162522.0121. office/onlyoffice-desktopeditors: Updated for version 5.2.8_2. office/texmacs: Updated for version 1.99.8. perl/perl-Net-XMPP: Updated for version 1.05. perl/perl-XML-Stream: Updated for version 1.24. python/XlsxWriter: Updated for version 1.0.8. python/decorator: Updated for version 4.3.2. python/dfvfs: Updated for version 20181215. python/dfwinreg: Updated for version 20180712. python/elasticsearch5: Added (python client for Elasticsearch). python/git-fame: Updated for version 1.7.0. python/parso: Updated for version 0.3.2. python/pbr: Updated for version 5.1.1. python/pkginfo: Updated for version 1.5.0.1. python/plaso: Updated for version 20181215. python/pycryptodome: Updated for version 3.7.3. python/pyparsing: Updated for version 2.3.1. python/python-django: Updated for version 1.11.18. python/python-lz4: Added (python bindings for lz4). python/python-neovim: Updated for version 0.3.2. python/python-wrapt: Updated for version 1.11.1. python/python3-decorator: Updated for version 4.3.2. python/python3-parso: Updated for version 0.3.2. python/python3-wrapt: Updated for version 1.11.1. ruby/rubygem-rubocop: Updated for version 0.63.1. system/USBdev: Updated for version 2019.01.17. system/ZoneMinder: Update DEP. system/bindfs: Updated for version 1.13.10. system/dfc: Updated for version 3.1.1. system/elasticsearch: Update README. system/execline: Added (non-interactive scripting language). system/inxi: Updated for version 3.0.30. system/kbfs: Updated for version 3.0.0_20190125162145. system/letsencrypt: Updated for version 0.30.1. system/openrc: Updated for version 0.40.3. system/s6: Added (process/service supervision suite). system/slpkg: Updated for version 3.4.2. system/telegraf: Updated for version 1.9.3. system/thinkfan: Updated for version 1.0.1. system/virt-viewer: Updated for version 7.0. system/wine: Update to 4.0 +--------------------------+ -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From kjhambrick at gmail.com Sat Jan 26 12:56:30 2019 From: kjhambrick at gmail.com (Konrad J Hambrick) Date: Sat, 26 Jan 2019 06:56:30 -0600 Subject: [Slackbuilds-users] Updates - 20190126.1 In-Reply-To: <60884005-55d0-ae7a-b383-6704eb717d39@slackbuilds.org> References: <60884005-55d0-ae7a-b383-6704eb717d39@slackbuilds.org> Message-ID: Thank you to B. Watson and Andrew Clemons for stepping up ! -- kjh On Fri, Jan 25, 2019 at 7:15 PM Willy Sudiarto Raharjo < willysr at slackbuilds.org> wrote: > Hello everyone, > > Over the year, we have seen our community is growing constantly and many > (new) maintainers stepping up to keep our repository up to date with > latest one available in the public. We are happy with the situation and > we think we can improve better by adding more admins on our side. > > We have been monitoring some of the active maintainers and we decided to > invite some of them to join us here as admins and today, i'm announcing > TWO (yes, two, not just one) new admins who will be joining us. They are > B. Watson (aka Urchlay in IRC) and Andrew Clemons. > > With the addition of two new admins, We do hope that we can do the same > as we did three years ago, which was releasing 14.2 repository in the > same day as Slackware 14.2 gets released. We still don't know when will > Slackware 15.0 gets released, but when the time comes, we are trying our > best to make sure it's ready as well. > > > Sat Jan 26 00:54:48 UTC 2019 > academic/fet Updated for version 5.37.5. > academic/ncbi-blast+: Updated for version 2.8.1. > academic/zotero: Updated for version 5.0.60. > audio/audacity: Added an incompatibility note to the README. > business/stansoft: Updated for version 7.15. > desktop/CurseTheWeather: Removed (No longer maintained upstream). > desktop/gtkhash: Updated for version 1.2. > desktop/rofi: Update README. > development/SQLAlchemy: Updated for version 1.2.16. > development/geany: Fix VERSION. > development/hub: Updated for version 2.7.1. > development/kakoune: Updated for version 2019.01.20. > development/kotlin: Updated for version 1.3.20. > development/psycopg2: Updated for version 2.7.7. > development/tiled: Updated for version 1.2.2. > games/picodrive: Updated for version 1.93. > gis/rasterio: Updated for version 1.0.14. > ham/xlog: Updated for version 2.0.17 > ilbraries/liburcu: Updated for version 0.10.2. > libraries/antlr4: Added (language tool). > libraries/libchewing: Updated for version 0.5.1 + new maintainer. > libraries/libexe: Added (libYAL EXE library). > libraries/libfsapfs: Added (libYAL NTFS library). > libraries/libfsntf: Updated for version 20190104. > libraries/libfwnt: Updated for version 20181215. > libraries/libfwsi: Updated for version 20181215. > libraries/liblnk: Updated for version 20181120. > libraries/libmsiecf: Updated for version 20181227. > libraries/libolecf: Updated for version 20181125. > libraries/libqcow: Updated for version 20181227. > libraries/libscca: Updated for version 20181128. > libraries/libsigscan: Updated for version 20181215. > libraries/libsmdev: Updated for version 20181227. > libraries/libsmraw: Updated for version 20181227. > libraries/libvshadow: Updated for version 20190112. > libraries/libvslvm: Updated for version 20181227. > libraries/libwrc: Added (libYAL WRC library). > libraries/skalibs: Added (general purpose C libraries). > misc/asterixInspector: Updated for version 0.12.3. > misc/sbo-templates: Updated for version 1.0.3. > network/asciinema: Updated for version 2.0.2. > network/bro: Updated for version 2.6.1. > network/discord: Update to 0.0.8 > network/dovecot-pigeonhole: Updated for version 0.5.4. > network/dovecot: Updated for version 2.3.4. > network/guacamole-client: Updated for version 1.0.0. > network/guacamole-server: Updated for version 1.0.0. > network/open-iscsi: Added (RFC3720 iSCSI Initiator). > network/open-isns: Added (Internet Storage Name Service). > network/palemoon-bin: Updated for version 28.3.1. > network/palemoon: Updated for version 28.3.1. > network/postfix: Updated for version 3.3.2. > network/prosody-mod-http-upload: Updated for version hg3446. > network/prosody-mod-smacks: Updated for version hg3450. > network/qbittorrent: Update to 3.3.16 > network/sendxmpp: Added (send xmpp messages from the command line). > network/telegram: Updated for version 1.5.8. > network/tor: Updated for version 0.3.5.7. > network/youtube-dl: Updated for version 2019.01.17. > network/zoom-linux: Updated for version 2.7.162522.0121. > office/onlyoffice-desktopeditors: Updated for version 5.2.8_2. > office/texmacs: Updated for version 1.99.8. > perl/perl-Net-XMPP: Updated for version 1.05. > perl/perl-XML-Stream: Updated for version 1.24. > python/XlsxWriter: Updated for version 1.0.8. > python/decorator: Updated for version 4.3.2. > python/dfvfs: Updated for version 20181215. > python/dfwinreg: Updated for version 20180712. > python/elasticsearch5: Added (python client for Elasticsearch). > python/git-fame: Updated for version 1.7.0. > python/parso: Updated for version 0.3.2. > python/pbr: Updated for version 5.1.1. > python/pkginfo: Updated for version 1.5.0.1. > python/plaso: Updated for version 20181215. > python/pycryptodome: Updated for version 3.7.3. > python/pyparsing: Updated for version 2.3.1. > python/python-django: Updated for version 1.11.18. > python/python-lz4: Added (python bindings for lz4). > python/python-neovim: Updated for version 0.3.2. > python/python-wrapt: Updated for version 1.11.1. > python/python3-decorator: Updated for version 4.3.2. > python/python3-parso: Updated for version 0.3.2. > python/python3-wrapt: Updated for version 1.11.1. > ruby/rubygem-rubocop: Updated for version 0.63.1. > system/USBdev: Updated for version 2019.01.17. > system/ZoneMinder: Update DEP. > system/bindfs: Updated for version 1.13.10. > system/dfc: Updated for version 3.1.1. > system/elasticsearch: Update README. > system/execline: Added (non-interactive scripting language). > system/inxi: Updated for version 3.0.30. > system/kbfs: Updated for version 3.0.0_20190125162145. > system/letsencrypt: Updated for version 0.30.1. > system/openrc: Updated for version 0.40.3. > system/s6: Added (process/service supervision suite). > system/slpkg: Updated for version 3.4.2. > system/telegraf: Updated for version 1.9.3. > system/thinkfan: Updated for version 1.0.1. > system/virt-viewer: Updated for version 7.0. > system/wine: Update to 4.0 > +--------------------------+ > > > -- > Willy Sudiarto Raharjo > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dominik.drobek at o2.pl Sat Jan 26 15:16:13 2019 From: dominik.drobek at o2.pl (Dominik Drobek) Date: Sat, 26 Jan 2019 16:16:13 +0100 Subject: [Slackbuilds-users] dosbox-dev-0.74.r4180: missing source tarball Message-ID: <6da59516-474d-1642-25d3-3390861096cd@o2.pl> Hi, I was trying to update dosbox-dev to the latest version, but I'm getting 404 error when trying to download the source tarball listed in the .info file: https://sourceforge.net/projects/slackbuildsdirectlinks/files/dosbox/dosbox-dev-0.74.r4180.tar.xz. Looks like the tarballs for all the previous versions are preseent, but the most recent one is missing. I'm not sure who is responsible for uploading these tarballs to slackbuildsdirectlinks on Sourceforge, so I'm posting to the list. Also CC the maintainer. Regards, Dominik Drobek From brent at exitstatusone.com Sat Jan 26 15:52:14 2019 From: brent at exitstatusone.com (Brent Earl) Date: Sat, 26 Jan 2019 08:52:14 -0700 Subject: [Slackbuilds-users] Updates - 20190126.1 In-Reply-To: References: <60884005-55d0-ae7a-b383-6704eb717d39@slackbuilds.org> Message-ID: Yes, it is great news to see that SBo continues to grow! On Sat, Jan 26, 2019, 5:56 AM Konrad J Hambrick Thank you to B. Watson and Andrew Clemons for stepping up ! > -- kjh > > On Fri, Jan 25, 2019 at 7:15 PM Willy Sudiarto Raharjo < > willysr at slackbuilds.org> wrote: > >> Hello everyone, >> >> Over the year, we have seen our community is growing constantly and many >> (new) maintainers stepping up to keep our repository up to date with >> latest one available in the public. We are happy with the situation and >> we think we can improve better by adding more admins on our side. >> >> We have been monitoring some of the active maintainers and we decided to >> invite some of them to join us here as admins and today, i'm announcing >> TWO (yes, two, not just one) new admins who will be joining us. They are >> B. Watson (aka Urchlay in IRC) and Andrew Clemons. >> >> With the addition of two new admins, We do hope that we can do the same >> as we did three years ago, which was releasing 14.2 repository in the >> same day as Slackware 14.2 gets released. We still don't know when will >> Slackware 15.0 gets released, but when the time comes, we are trying our >> best to make sure it's ready as well. >> >> >> Sat Jan 26 00:54:48 UTC 2019 >> academic/fet Updated for version 5.37.5. >> academic/ncbi-blast+: Updated for version 2.8.1. >> academic/zotero: Updated for version 5.0.60. >> audio/audacity: Added an incompatibility note to the README. >> business/stansoft: Updated for version 7.15. >> desktop/CurseTheWeather: Removed (No longer maintained upstream). >> desktop/gtkhash: Updated for version 1.2. >> desktop/rofi: Update README. >> development/SQLAlchemy: Updated for version 1.2.16. >> development/geany: Fix VERSION. >> development/hub: Updated for version 2.7.1. >> development/kakoune: Updated for version 2019.01.20. >> development/kotlin: Updated for version 1.3.20. >> development/psycopg2: Updated for version 2.7.7. >> development/tiled: Updated for version 1.2.2. >> games/picodrive: Updated for version 1.93. >> gis/rasterio: Updated for version 1.0.14. >> ham/xlog: Updated for version 2.0.17 >> ilbraries/liburcu: Updated for version 0.10.2. >> libraries/antlr4: Added (language tool). >> libraries/libchewing: Updated for version 0.5.1 + new maintainer. >> libraries/libexe: Added (libYAL EXE library). >> libraries/libfsapfs: Added (libYAL NTFS library). >> libraries/libfsntf: Updated for version 20190104. >> libraries/libfwnt: Updated for version 20181215. >> libraries/libfwsi: Updated for version 20181215. >> libraries/liblnk: Updated for version 20181120. >> libraries/libmsiecf: Updated for version 20181227. >> libraries/libolecf: Updated for version 20181125. >> libraries/libqcow: Updated for version 20181227. >> libraries/libscca: Updated for version 20181128. >> libraries/libsigscan: Updated for version 20181215. >> libraries/libsmdev: Updated for version 20181227. >> libraries/libsmraw: Updated for version 20181227. >> libraries/libvshadow: Updated for version 20190112. >> libraries/libvslvm: Updated for version 20181227. >> libraries/libwrc: Added (libYAL WRC library). >> libraries/skalibs: Added (general purpose C libraries). >> misc/asterixInspector: Updated for version 0.12.3. >> misc/sbo-templates: Updated for version 1.0.3. >> network/asciinema: Updated for version 2.0.2. >> network/bro: Updated for version 2.6.1. >> network/discord: Update to 0.0.8 >> network/dovecot-pigeonhole: Updated for version 0.5.4. >> network/dovecot: Updated for version 2.3.4. >> network/guacamole-client: Updated for version 1.0.0. >> network/guacamole-server: Updated for version 1.0.0. >> network/open-iscsi: Added (RFC3720 iSCSI Initiator). >> network/open-isns: Added (Internet Storage Name Service). >> network/palemoon-bin: Updated for version 28.3.1. >> network/palemoon: Updated for version 28.3.1. >> network/postfix: Updated for version 3.3.2. >> network/prosody-mod-http-upload: Updated for version hg3446. >> network/prosody-mod-smacks: Updated for version hg3450. >> network/qbittorrent: Update to 3.3.16 >> network/sendxmpp: Added (send xmpp messages from the command line). >> network/telegram: Updated for version 1.5.8. >> network/tor: Updated for version 0.3.5.7. >> network/youtube-dl: Updated for version 2019.01.17. >> network/zoom-linux: Updated for version 2.7.162522.0121. >> office/onlyoffice-desktopeditors: Updated for version 5.2.8_2. >> office/texmacs: Updated for version 1.99.8. >> perl/perl-Net-XMPP: Updated for version 1.05. >> perl/perl-XML-Stream: Updated for version 1.24. >> python/XlsxWriter: Updated for version 1.0.8. >> python/decorator: Updated for version 4.3.2. >> python/dfvfs: Updated for version 20181215. >> python/dfwinreg: Updated for version 20180712. >> python/elasticsearch5: Added (python client for Elasticsearch). >> python/git-fame: Updated for version 1.7.0. >> python/parso: Updated for version 0.3.2. >> python/pbr: Updated for version 5.1.1. >> python/pkginfo: Updated for version 1.5.0.1. >> python/plaso: Updated for version 20181215. >> python/pycryptodome: Updated for version 3.7.3. >> python/pyparsing: Updated for version 2.3.1. >> python/python-django: Updated for version 1.11.18. >> python/python-lz4: Added (python bindings for lz4). >> python/python-neovim: Updated for version 0.3.2. >> python/python-wrapt: Updated for version 1.11.1. >> python/python3-decorator: Updated for version 4.3.2. >> python/python3-parso: Updated for version 0.3.2. >> python/python3-wrapt: Updated for version 1.11.1. >> ruby/rubygem-rubocop: Updated for version 0.63.1. >> system/USBdev: Updated for version 2019.01.17. >> system/ZoneMinder: Update DEP. >> system/bindfs: Updated for version 1.13.10. >> system/dfc: Updated for version 3.1.1. >> system/elasticsearch: Update README. >> system/execline: Added (non-interactive scripting language). >> system/inxi: Updated for version 3.0.30. >> system/kbfs: Updated for version 3.0.0_20190125162145. >> system/letsencrypt: Updated for version 0.30.1. >> system/openrc: Updated for version 0.40.3. >> system/s6: Added (process/service supervision suite). >> system/slpkg: Updated for version 3.4.2. >> system/telegraf: Updated for version 1.9.3. >> system/thinkfan: Updated for version 1.0.1. >> system/virt-viewer: Updated for version 7.0. >> system/wine: Update to 4.0 >> +--------------------------+ >> >> >> -- >> Willy Sudiarto Raharjo >> >> _______________________________________________ >> SlackBuilds-users mailing list >> SlackBuilds-users at slackbuilds.org >> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users >> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ >> FAQ - https://slackbuilds.org/faq/ >> >> _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From yth at ythogtha.org Sat Jan 26 15:50:54 2019 From: yth at ythogtha.org (Arnaud) Date: Sat, 26 Jan 2019 16:50:54 +0100 Subject: [Slackbuilds-users] dosbox-dev-0.74.r4180: missing source tarball In-Reply-To: <6da59516-474d-1642-25d3-3390861096cd@o2.pl> References: <6da59516-474d-1642-25d3-3390861096cd@o2.pl> Message-ID: <20190126165054.34f5e85d9494fb284a7a0c93@ythogtha.org> > Hi, > > I was trying to update dosbox-dev to the latest version, but I'm getting > 404 error when trying to download the source tarball listed in the .info > file: > https://sourceforge.net/projects/slackbuildsdirectlinks/files/dosbox/dosbox-dev-0.74.r4180.tar.xz. > Looks like the tarballs for all the previous versions are preseent, but > the most recent one is missing. > > I'm not sure who is responsible for uploading these tarballs to > slackbuildsdirectlinks on Sourceforge, so I'm posting to the list. Also > CC the maintainer. > > Regards, > Dominik Drobek Well, that would be my mistake, for which I apologise, and I corrected it by uploading the file in its rightful place. I've also updated it for revision 4184, I've tested and submitted it just now, and the source tarball is available on slackbuildsdirectlinks alongside r4180. Sorry :) -- Arnaud From dominik.drobek at o2.pl Sat Jan 26 15:59:18 2019 From: dominik.drobek at o2.pl (Dominik Drobek) Date: Sat, 26 Jan 2019 16:59:18 +0100 Subject: [Slackbuilds-users] dosbox-dev-0.74.r4180: missing source tarball In-Reply-To: <20190126165054.34f5e85d9494fb284a7a0c93@ythogtha.org> References: <6da59516-474d-1642-25d3-3390861096cd@o2.pl> <20190126165054.34f5e85d9494fb284a7a0c93@ythogtha.org> Message-ID: <2055bde3-dab7-e662-44b1-83d9eeb60c99@o2.pl> > I've also updated it for revision 4184, I've tested and submitted it just now, > and the source tarball is available on slackbuildsdirectlinks alongside r4180. I just built r4180. Thanks for the quick fix. :) Regards, Dominik Drobek From dpross1100 at msn.com Sat Jan 26 19:13:28 2019 From: dpross1100 at msn.com (Daniel Prosser) Date: Sat, 26 Jan 2019 19:13:28 +0000 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: <74b5c2e4-94be-8047-1c44-0dad1c5e3af6@slackbuilds.org> Message-ID: Certainly. It might take me a few days to get around to it, but I'll try to have it in before next week's update. Dan On Jan 25, 2019 8:33 AM, Willy Sudiarto Raharjo wrote: > One final (I think) note: if you want to use the ZoneMinder API, you also > need to have php-apcu installed. It would be good to document these things > so that users don't have to dig to find it. >> Thanks Willy. A couple more notes/issues/fixes for this new version: >> >> 1. By default, ZoneMinder now saves events as mp4 videos instead of >> frames. For this to work, x264 and libmp4v2 must be installed prior to >> building. It's still possible to just use image frames as before, but I >> think x264 and libmp4v2 need to be at least optional dependencies. >> Personally, I think they should be required, as otherwise the user will >> have to switch to saving image frames only. >> >> 2. Even with x264 and libmp4v2 installed, ZoneMinder was still unable to >> save videos for me. I had to apply the attached patch for it to work. >> I'm not really sure why that's the case, since I didn't find any other >> reports of it not working as is. GenoBob, perhaps you and/or any other >> Slackware ZoneMinder users can report whether it works for you (and add >> this patch to the SlackBuild if appropriate)? >> >> 3. This version stores events and other data in ZM_CONTENTDIR, which >> defaults to /var/lib/zoneminder. However, the SlackBuild script doesn't >> create this directory, so there are initially errors when running until >> the user manually creates it. (It needs to be owned by apache:apache). I >> recommend having the SlackBuild script create this directory as part of the >> package, and make it a build option so it can be changed at build time. >> >> Don't take these comments as a criticism. I am really grateful for the >> script and I'm glad that it's basically working for me now. I was actually >> procrastinating upgrading to 1.32.x because of all the changes. I just >> want to help make the installation process as smooth as possible for >> others. Hi Dan Thanks for this investigations would you mind sending me the patch for this improvements? -- Willy Sudiarto Raharjo -------------- next part -------------- An HTML attachment was scrubbed... URL: From dpross1100 at msn.com Tue Jan 29 02:26:28 2019 From: dpross1100 at msn.com (Daniel Prosser) Date: Tue, 29 Jan 2019 02:26:28 +0000 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: <74b5c2e4-94be-8047-1c44-0dad1c5e3af6@slackbuilds.org> References: <74b5c2e4-94be-8047-1c44-0dad1c5e3af6@slackbuilds.org> Message-ID: Willy, Here are three patches. The first one you should be able to apply to ZoneMinder in the SBo git. The second two are patches executed by the SlackBuild. fix_video_file_format.patch is the one I mentioned previously that was needed on my system for ZoneMinder to encode mp4 videos for events. fix_zone_area_calc.patch applies upstream commits 4937a686 and 4da95369. I also added ffmpeg, libmp4v2, and x264 as dependencies and noted php-apcu as an optional dependency. Hopefully the maintainer will also weigh in on these changes. Dan On Fri, Jan 25, 2019 at 08:33:46PM +0700, Willy Sudiarto Raharjo wrote: > > One final (I think) note: if you want to use the ZoneMinder API, you also > > need to have php-apcu installed. It would be good to document these things > > so that users don't have to dig to find it. > > >> Thanks Willy. A couple more notes/issues/fixes for this new version: > >> > >> 1. By default, ZoneMinder now saves events as mp4 videos instead of > >> frames. For this to work, x264 and libmp4v2 must be installed prior to > >> building. It's still possible to just use image frames as before, but I > >> think x264 and libmp4v2 need to be at least optional dependencies. > >> Personally, I think they should be required, as otherwise the user will > >> have to switch to saving image frames only. > >> > >> 2. Even with x264 and libmp4v2 installed, ZoneMinder was still unable to > >> save videos for me. I had to apply the attached patch for it to work. > >> I'm not really sure why that's the case, since I didn't find any other > >> reports of it not working as is. GenoBob, perhaps you and/or any other > >> Slackware ZoneMinder users can report whether it works for you (and add > >> this patch to the SlackBuild if appropriate)? > >> > >> 3. This version stores events and other data in ZM_CONTENTDIR, which > >> defaults to /var/lib/zoneminder. However, the SlackBuild script doesn't > >> create this directory, so there are initially errors when running until > >> the user manually creates it. (It needs to be owned by apache:apache). I > >> recommend having the SlackBuild script create this directory as part of the > >> package, and make it a build option so it can be changed at build time. > >> > >> Don't take these comments as a criticism. I am really grateful for the > >> script and I'm glad that it's basically working for me now. I was actually > >> procrastinating upgrading to 1.32.x because of all the changes. I just > >> want to help make the installation process as smooth as possible for > >> others. > > Hi Dan > > Thanks for this investigations > > would you mind sending me the patch for this improvements? > > > > -- > Willy Sudiarto Raharjo > -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: 0001-Add-ZoneMinder-patches-CONTENTDIR-and-update-require.patch URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: fix_video_file_format.patch URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: fix_zone_area_calc.patch URL: From willysr at slackbuilds.org Tue Jan 29 02:47:31 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Tue, 29 Jan 2019 09:47:31 +0700 Subject: [Slackbuilds-users] ZoneMinder build fails if ffmpeg is not installed In-Reply-To: References: <74b5c2e4-94be-8047-1c44-0dad1c5e3af6@slackbuilds.org> Message-ID: > Here are three patches. The first one you should be able to apply to > ZoneMinder in the SBo git. The second two are patches executed by the > SlackBuild. fix_video_file_format.patch is the one I mentioned > previously that was needed on my system for ZoneMinder to encode mp4 > videos for events. fix_zone_area_calc.patch applies upstream commits > 4937a686 and 4da95369. I also added ffmpeg, libmp4v2, and x264 as > dependencies and noted php-apcu as an optional dependency. Hopefully > the maintainer will also weigh in on these changes. I think you cover all of those changes in the first patch :) -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From dickson.tim at googlemail.com Tue Jan 29 16:22:38 2019 From: dickson.tim at googlemail.com (Tim Dickson) Date: Tue, 29 Jan 2019 16:22:38 +0000 Subject: [Slackbuilds-users] fluidsynth slackbuild failure Message-ID: when trying to create fluidsynth package with LADSPA=yes and lash, portaudio and jack2 present i get the compiling bombing out at [ 95%] Linking C shared library libfluidsynth.so CMakeFiles/libfluidsynth.dir/bindings/fluid_lash.c.o: In function `fluid_lash_create_thread': /tmp/SBo/fluidsynth-1.1.6/src/bindings/fluid_lash.c:65: undefined reference to `pthread_create' collect2: error: ld returned 1 exit status src/CMakeFiles/libfluidsynth.dir/build.make:1110: recipe for target 'src/libfluidsynth.so.1.5.2' failed make[2]: *** [src/libfluidsynth.so.1.5.2] Error 1 CMakeFiles/Makefile2:183: recipe for target 'src/CMakeFiles/libfluidsynth.dir/all' failed make[1]: *** [src/CMakeFiles/libfluidsynth.dir/all] Error 2 Makefile:149: recipe for target 'all' failed make: *** [all] Error 2 I've had a look at fluid_lash.c and it includes pthread.h and /usr/include/pthread.h has a pthread_create function. Any ideas? (I have assumed that jack2 is equivalent to jack-audio-connection-kit as they are mutually exclusive.) (background... I'm trying to create all the deps for vlc). regards, Tim From yalhcru at gmail.com Tue Jan 29 17:11:59 2019 From: yalhcru at gmail.com (B Watson) Date: Tue, 29 Jan 2019 12:11:59 -0500 Subject: [Slackbuilds-users] fluidsynth slackbuild failure In-Reply-To: References: Message-ID: On 1/29/19, Tim Dickson via SlackBuilds-users wrote: > when trying to create fluidsynth package with LADSPA=yes > and lash, portaudio and jack2 present i get > the compiling bombing out at > > [ 95%] Linking C shared library libfluidsynth.so > CMakeFiles/libfluidsynth.dir/bindings/fluid_lash.c.o: In function > `fluid_lash_create_thread': > /tmp/SBo/fluidsynth-1.1.6/src/bindings/fluid_lash.c:65: undefined > reference to `pthread_create' > collect2: error: ld returned 1 exit status > src/CMakeFiles/libfluidsynth.dir/build.make:1110: recipe for target > 'src/libfluidsynth.so.1.5.2' failed > make[2]: *** [src/libfluidsynth.so.1.5.2] Error 1 > CMakeFiles/Makefile2:183: recipe for target > 'src/CMakeFiles/libfluidsynth.dir/all' failed > make[1]: *** [src/CMakeFiles/libfluidsynth.dir/all] Error 2 > Makefile:149: recipe for target 'all' failed > make: *** [all] Error 2 > > I've had a look at fluid_lash.c and it includes pthread.h and > /usr/include/pthread.h has a pthread_create function. Any ideas? fluidsynth isn't my package, but jack and jack2 are... This isn't a compile problem, it's a link problem. Caused by the fact that: # jack-audio-connection-kit installed $ pkg-config --libs jack -ljack -lpthread # jack2 installed $ pkg-config --libs jack -ljack fluidsynth is assuming it doesn't have to add -lpthread to its link flags because it thinks the pkg-config for jack will always have it. I'm not sure (yet) whether it's better to fix this by patching jack2 or fluidsynth, but for now, to get this to build, try editing fluidsynth.SlackBuild, find these 2 lines: -DCMAKE_EXE_LINKER_FLAGS="-ltermcap" \ -DCMAKE_SHARED_LINKER_FLAGS="-ltermcap" \ ...and add -lpthread to them, so they look like: -DCMAKE_EXE_LINKER_FLAGS="-ltermcap -lpthread" \ -DCMAKE_SHARED_LINKER_FLAGS="-ltermcap -lpthread" \ This is untested, let me know if it doesn't work. The long-term solution to this will probably be for me to add -lpthred to jack2's pkg-config. Will have to do some testing, make sure it doesn't break anything (it shouldn't though). > (I have assumed that jack2 is equivalent to jack-audio-connection-kit as > they are mutually exclusive.) According to the jack devs, you're supposed to be able to assume that they're equivalent. From T.Crane at rhul.ac.uk Thu Jan 31 18:59:31 2019 From: T.Crane at rhul.ac.uk (Tom Crane) Date: Thu, 31 Jan 2019 18:59:31 +0000 Subject: [Slackbuilds-users] git clone instead of downloading a source tarball Message-ID: I've had a browse through the list archive and instructions at https://slackbuilds.org/guidelines/ but can't find any relevant comment. Could I ask: Is it at all acceptable to submit an entry which does not download a source tarball but does a 'git clone' instead? Browsing through existing packages I could not find any which do this but it seems an obvious way to keep an entry up-to-date without maintainer updates to the Slackbuild script, albeit at a higher risk of future changes to the source breaking the build ? Regards Tom Crane From willysr at slackbuilds.org Thu Jan 31 19:01:22 2019 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Fri, 1 Feb 2019 02:01:22 +0700 Subject: [Slackbuilds-users] git clone instead of downloading a source tarball In-Reply-To: References: Message-ID: > Could I ask: Is it at all acceptable to submit an entry which does not > download a source tarball but does a 'git clone' instead? Browsing > through existing packages I could not find any which do this but it > seems an obvious way to keep an entry up-to-date without maintainer > updates to the Slackbuild script, albeit at a higher risk of future > changes to the source breaking the build ? No We prefer a released tarball If upstream doesn't release any tarball, the maintainer must make one by cloning the repository at some point and host it somewhere public. -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: From dpross1100 at msn.com Thu Jan 31 20:31:23 2019 From: dpross1100 at msn.com (Daniel Prosser) Date: Thu, 31 Jan 2019 20:31:23 +0000 Subject: [Slackbuilds-users] git clone instead of downloading a source tarball In-Reply-To: Message-ID: To add to what Willy said, SlackBuilds on SBo don't download source tarballs either. That is up to the user or the tool used. -------------- next part -------------- An HTML attachment was scrubbed... URL: