<div dir="ltr"><div class="gmail_quote gmail_quote_container"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br>
> hi Andrew,<br>
> <br>
> usually you can install them, if they don't overlap with something else...<br>
> <br>
> in this case and considered also that libindi is part of Slackware since <br>
> this iteration of current (so it will be in the next stable release), <br>
> IMHO, you could let the SlackBuild install them and then, still in the <br>
> SlackBuild, move them away in the /usr/doc/firecapture-$VERSION <br>
> directory, adding a note in the README that one has to manually copy the <br>
> udev rule for his own hardware in the /etc/udev/rules.d directory.<br>
> <br>
> Matteo<br>
<br>
Yes, I concur that plopping the udev rules into /usr/doc/... might be <br>
best now that INDI is in Slackware-Current.  While libindi has a bunch <br>
of driver and undev rules included, I will still be maintaining the <br>
additional 3rd party drivers and libraries. I might need to do something <br>
similar.<br>
<br>
libindi-drivers<br>
libindi-libraries<br>
<br>
Looking at firecapture, there may be some camera library conflicts (ZWO <br>
ASI for example), so you may need to reference and itemize in your README.<br>
<br>
<a href="https://drivers.indilib.org/cameras/" rel="noreferrer" target="_blank">https://drivers.indilib.org/cameras/</a><br>
<br>
I was not aware of firecapture.  Looks nifty.<br>
<br>
<br>
-Ed<br><br></blockquote><div>Thanks Matteo and Ed.</div><div><br></div><div>I'll go with putting the rules in /usr/doc.</div><div><br></div><div>Ed - I'll need to test the slackbuild on 15.0 in due course because I'm actually doing this on -current as it happens as it's on the laptop I use for astro stuff with kstars/ekos. Works very well. Thanks for your efforts getting that into slackware! I have noticed that the QHY libraries shipped with firecapture are slightly older than those in my libindi-libraries package, but I did adapt your slackbuilds for my needs as I needed the latest betas from QHY to support the minicam8. Again, I'll need to test this again on 15.0 with your vanilla slackbuilds. I'll report back if I learn anything from that.</div><div><br></div><div>Andrew</div></div></div>