[Slackbuilds-users] openjdk8 compile (either manually or via sbotools) failing at openjdk7

Fri Apr 8 13:52:50 UTC 2022

Here is what I have found.  The checksum error comes from the new zlib
1.2.12, which may have fixed the problem in 1.2.11 but I suspect badly
broke something else.  Adding --disable-system-zlib to the icedtea
configure parameters takes care of that.
As for the libstdc++ library linking issue on 32-bit, this looks like an
issue with the interaction between gcc11 and gcc5 and not in openjdk(6,7).
Installing an older -current in a test partition (actually 15.0-rc1), I'll
let you know what I find.

On Fri, Apr 8, 2022 at 9:22 AM Habs <gen-bch at useyouresp.org.uk> wrote:

> On Fri, 8 Apr 2022, Luc Van Rompaey wrote:
>
> > Op vr 8 apr. 2022 om 14:18 schreef Luc Van Rompaey <
> luc.vanrompaey at gmail.com
> >> :
> >
> >>
> >>
> >> Op wo 6 apr. 2022 om 14:49 schreef Habs <gen-bch at useyouresp.org.uk>:
> >>
> >>> On Wed, 6 Apr 2022, Luc Van Rompaey wrote:
> >>>
> >>>> Op wo 6 apr. 2022 om 10:10 schreef Arnaud via SlackBuilds-users <
> >>>> slackbuilds-users at slackbuilds.org>:
> >>>>
> >>>>>>>> java.util.zip.ZipException: invalid entry CRC (expected 0x3943b2a7
> >>> but
> >>>>>>>> got 0xc7a06d31)
> >>>>>>>
> >>>>>>> This looks like you're inadvertently using the wrong set of source
> >>>>>>> files. Each new openjdk version has a new set of source files, many
> >>> of
> >>>>>>> which have no version number (openjdk.tar.bz2, corba.tar.bz2, ...)
> so
> >>>>>>> your build system can easily pick up the wrong source file.
> >>>>>>>
> >>>>>>> chris
> >>>>>>
> >>>>>> Good morning all
> >>>>>>
> >>>>>> I do not doubt the comment above, but in this case, how could it be
> >>>>> unless
> >>>>>> the slackbuild source links are out of step/compromised/whatever.
> >>>>>>
> >>>>>> As I mentioned, it is a clean physical machine freshly installed and
> >>>>> then
> >>>>>> updated - no other [java related or other slackbuild addons etc]
> >>>>> downloads
> >>>>>> prior - and simply the source files linked in the slackbuild info.
> >>> Each
> >>>>>> slackbuild individually run using 'su -' (rather than using sbotools
> >>> or
> >>>>>> similar) as required.  I don't even get to try openjdk8 (or download
> >>>>>> anything for it) as apache-ant, gcc5 and openjdk7 are listed as
> >>> required
> >>>>>> first.  It is openjdk7 that is failing in that chain as such.
> >>>>>>
> >>>>>> That all said, I will go back and check the sources, though I think
> >>> that
> >>>>>> has been done by Matteo.
> >>>>>>
> >>>>>> Regards
> >>>>>> Habs
> >>>>>
> >>>>> My comment will not add much to the problem, but my several tries are
> >>> all
> >>>>> failing at the same place (ie: invalid entry CRC).
> >>>>> Be it on my master very unclean multilib box, a chroot, multilib or
> >>> not,
> >>>>> updated and clean, or some other cleaner boxes, VMs, not multilib, I
> >>> can't
> >>>>> make it build, and it always fails on the same place...
> >>>>>
> >>>>> But unlike others here, I don't pretend doing it on perfectly clean
> >>>>> installations (though always without any other java installed).
> >>>>> Although I am really sure my source packages are the right ones,
> MD5SUM
> >>>>> checked and all.
> >>>>>
> >>>>> --
> >>>>> Arnaud <arnaud.garcia-fernandez at laposte.net>
> >>>>>
> >>>>> Let me first tell you all that I have been out of the Slackware loop
> >>> for a
> >>>> while and that I'm only just getting ready to install Slackware 15.0
> on
> >>> my
> >>>> new computer.
> >>>> Thus, for now, I cannot do any tests involving Slackware myself.
> >>>>
> >>>> Anyway, I remember looking into the different Apache Ant releases just
> >>>> before life interfered, and I was about to try and figure out how the
> >>> Ant
> >>>> releases and the (Open)JDK version did and did not go together. I
> hadn't
> >>>> gotten far enough to draw any final conclusions, though, and I hadn't
> >>> taken
> >>>> any meaningful notes yet.
> >>>>> _______________________________________________
> >>>>> SlackBuilds-users mailing list
> >>>>> SlackBuilds-users at slackbuilds.org
> >>>>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> >>>>> Archives -
> https://lists.slackbuilds.org/pipermail/slackbuilds-users/
> >>>>> FAQ - https://slackbuilds.org/faq/
> >>>>
> >>>> This ongoing discussion reminded me that I had sent in an update to
> the
> >>>> apache-ant slackbuild when I took it over. According to the
> SlackBuilds
> >>>> history, it had been at Ant version 1.9.9 until then, and I updated it
> >>> to
> >>>> 1.9.14. Now, if I remember correctly, I had successfully compiled
> >>> OpenJDK 7
> >>>> (and subsequently 8) before I took over the apache-ant slackbuild,
> and I
> >>>> don't believe that I have ever recompiled them since then.
> >>>>
> >>>> Anyway, to cut a long story short, I'm now wondering if, perhaps, the
> >>>> problem may have anything to do with the Apache Ant version. In other
> >>>> words, the build fails with Ant 1.9.14, but it may still complete
> >>>> successfully with Ant 1.9.9. May be worth a try. Then, if that works,
> I
> >>> may
> >>>> attempt a build with the latest Ant 1.9.x revision (currently 1.9.16)
> >>> and
> >>>> see what gives. In any case, there's no point in trying the build with
> >>> Ant
> >>>> 1.10.x, since that cannot make sense of any Java run-time environment
> >>> older
> >>>> than, I think, Java version 8 (and, consequently, the Java environment
> >>>> provided by gcc5).
> >>>>
> >>>> If anyone wants to try out the OpenJDK build with Apache Ant 1.9.9
> while
> >>>> I'm getting ready for Slackware 15.0, the Ant versions can be
> downloaded
> >>>> from https://archive.apache.org/dist/ant/binaries/
> >>>>
> >>>> Let's hope we can work this issue out.
> >>>>
> >>>> Regards,
> >>>> Luc.
> >>>>
> >>> Good day all
> >>>
> >>> I can confirm that using 1.9.9 does not resolve the issue from my
> attempt
> >>> a short while ago.
> >>>
> >>> Regards
> >>> Habs
> >>>
> >>>
> >>> --- Sent using Alpine/Pine, probably the best MUA ---
> >>>
> >>> My Tox Messaging Id:
> >>>
> >>>
> 9F10AC64260ADEBAEA017ACB71B7CD2E962596FC4293025C0F79D77FFEB4CE5C7B0BED41D925
> >>> Get a client here: https://tox.chat/clients.html
> >>>
> >>> _______________________________________________
> >>> SlackBuilds-users mailing list
> >>> SlackBuilds-users at slackbuilds.org
> >>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> >>> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
> >>> FAQ - https://slackbuilds.org/faq/
> >>>
> >>>
> >> I have just successfully built openjdk7 on a freshly installed
> Slackware64
> >> 15.0 system, with no system updates installed yet.
> >> The apache-ant version is 1.9.14 (as currently provided by the
> slackbuild).
> >> I'm using a 24-GB tmpfs for the "/tmp" location.
> >>
> >> I will next update the Slackware64 system and retry the openjdk7 build.
> >>
> >> Regards,
> >> Luc.
> >>
> >
> > After I updated the Slackware64 15.0 system, the openjdk7 build fails:
> >
> > java.util.zip.ZipException: invalid entry CRC (expected 0x3943b2a7 but
> got
> > 0xc7a06d31)
> > at java.util.zip.ZipInputStream.readEnd(ZipInputStream.java:413)
> > at java.util.zip.ZipInputStream.read(ZipInputStream.java:195)
> > at java.io.FilterInputStream.read(FilterInputStream.java:107)
> > at sun.tools.jar.Main.copy(Main.java:822)
> > at sun.tools.jar.Main.update(Main.java:584)
> > at sun.tools.jar.Main.run(Main.java:224)
> > at sun.tools.jar.Main.main(Main.java:1231)
> > gmake[8]: ***
> >
> [/tmp/SBo/openjdk7/icedtea-build/openjdk/hotspot/make/linux/makefiles/sa.make:86:
> >
> /tmp/SBo/openjdk7/icedtea-build/openjdk.build/hotspot/outputdir/linux_amd64_compiler2/product/../generated/sa-jdi.jar]
> > Error 1
> >
> > This confirms earlier reports from others.
> >
> > Regards,
> > Luc.
> >
>
> Noted. I will not try again on this as it does look like it is something
> in the 'slackware updates' affecting something in the openjdk7 build chain
> at some point.
>
> Thank you Luc
> Habs
>
>
> --- Sent using Alpine/Pine, probably the best MUA ---
>
> My Tox Messaging Id:
>
> 9F10AC64260ADEBAEA017ACB71B7CD2E962596FC4293025C0F79D77FFEB4CE5C7B0BED41D925
> Get a client here: https://tox.chat/clients.html
>
> _______________________________________________
> SlackBuilds-users mailing list
> SlackBuilds-users at slackbuilds.org
> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
> FAQ - https://slackbuilds.org/faq/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.slackbuilds.org/pipermail/slackbuilds-users/attachments/20220408/f8cf0629/attachment-0001.htm>