From willysr at slackbuilds.org Sun Nov 1 00:38:53 2026 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 1 Nov 2026 07:38:53 +0700 Subject: [Slackbuilds-users] Updates - 20261031.1 In-Reply-To: References: <20261031091019.14f1e8e5@home.slackie.org> Message-ID: <20261101073853.70243514@home.slackie.org> > >> graphics/pencil: Added (Renamed from pencil3). > >pencil3 was renamed but it still appears in the slackbuilds.org index Since it was added, we didn't remove the old one do you want to remove the old pencil as well? -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 870 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sun Nov 1 01:21:50 2026 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 1 Nov 2026 08:21:50 +0700 Subject: [Slackbuilds-users] Scheduled Maintenance Notice Message-ID: <20261101082150.68fd0bf8@home.slackie.org> Hi Everyone We are planning to conduct a scheduled maintenance next week after public update is finished. We estimate the process will not take long, but due to timezone differences between admins, we think 24-48h should be enough, unless there's an issue and we might need more time. During this period, we will close the submissions, so if you have any updates, please send it via our third party mirror platforms (github/gitlab/codeberg). New submission via form will be on hold during maintenance period. -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 870 bytes Desc: OpenPGP digital signature URL: From roberto.puzzanghera at sagredo.eu Sun Nov 1 06:18:50 2026 From: roberto.puzzanghera at sagredo.eu (Roberto Puzzanghera) Date: Sun, 01 Nov 2026 07:18:50 +0100 Subject: [Slackbuilds-users] Updates - 20261031.1 In-Reply-To: <20261101073853.70243514@home.slackie.org> References: <20261031091019.14f1e8e5@home.slackie.org> <20261101073853.70243514@home.slackie.org> Message-ID: Il 01-11-2026 01:38 Willy Sudiarto Raharjo ha scritto: >> >>> graphics/pencil: Added (Renamed from pencil3). >> >> pencil3 was renamed but it still appears in the slackbuilds.org index > > Since it was added, we didn't remove the old one > do you want to remove the old pencil as well? Yes. Thank you From urchlay at slackware.uk Sun Nov 1 06:59:02 2026 From: urchlay at slackware.uk (B. Watson) Date: Sun, 1 Nov 2026 01:59:02 -0500 (EST) Subject: [Slackbuilds-users] Unsupported on 32-bit due to dependencies Message-ID: This came up a week ago or so... someone was asked to mark a new submission as unsupported on 32-bit, because one of its dependencies was 64-bit only (probably rust-opt, can't remember now). So here's a list of existing builds that have the same issue: listed as supporting 32-bit, but have dependencies that are 64-bit-only. I was surprised to find my own pipe-viewer on this list (it wasn't 64-bit-only when I first submitted it), some of you may be surprised, too. Maintainers of these builds, do any of you object to them being marked as 64-bit-only? The ones that depend on qt6 will have to be changed back someday, when/if we manage to get qt6 to build for 32-bit on 15.0 (is anyone working on this?), and definitely when Slackware 16.0 releases, with qt6 in the 32-bit OS. I think it's worth doing anyway. The list: academic/MetaPhlAn2 academic/OpenFOAM academic/PhyML academic/RAxML academic/bibletime academic/hyphy academic/lammps academic/locarna academic/meme-suite academic/scmutils desktop/ClamAV-GUI desktop/copyq desktop/dpscreenocr desktop/insync-thunar desktop/qtpass development/clojure development/ddisasm development/gerbil development/libnvidia-container development/rmlmmc games/OpenRA games/RMG gis/TauDEM graphics/yafaray-blender libraries/GtkD libraries/MDI_Library libraries/dbcsr libraries/libcamera libraries/libfm-qt libraries/libxnvctrl libraries/openimagedenoise libraries/parsec libraries/php-oci8 libraries/qt6keychain libraries/scalapack misc/OSCAR multimedia/pipe-viewer multimedia/strawberry multimedia/vokoscreenNG multimedia/yt-x network/deskflow office/ProjectLibre office/unoconv perl/perl-CPANPLUS-Dist-Slackware perl/perl-Net-Works python/blink-qt python/python3-sipclients3 python/subuser system/buildah system/distrobox system/jenkins system/qdirstat system/rng-tools From willysr at slackbuilds.org Sun Nov 1 12:14:31 2026 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 1 Nov 2026 19:14:31 +0700 Subject: [Slackbuilds-users] Unsupported on 32-bit due to dependencies In-Reply-To: References: Message-ID: <20261101191431.180a779f@home.slackie.org> >office/ProjectLibre >system/distrobox This 2 are mine, so i changed it already -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 870 bytes Desc: OpenPGP digital signature URL: From sbo at linuxgalaxy.org Sun Nov 1 21:05:19 2026 From: sbo at linuxgalaxy.org (KB_SBo) Date: Sun, 01 Nov 2026 21:05:19 +0000 Subject: [Slackbuilds-users] Gridcoin-Research-5.5.1 EOL Message-ID: <8f0bfbca-7808-4a9e-8664-43899ca33f86@linuxgalaxy.org> Hello All, Gridcoin-Research-5.5.2 (Leisure, recommended) is released; however, this now requires OpenSSL 3.5 LTS. Slackware15-15.0 is still using OpenSSL-1.1.1. While there is no rush to upgrade, Gridcoin-Research-5.5.2 has quite a few additions, security updates and fixes. https://github.com/gridcoin-community/Gridcoin-Research/blob/master/CHANGELOG.md Given the above, Gridcoin-Research-5.5.1 is the ** LAST version ** for Slackware-15.0. -kb. From urchlay at slackware.uk Sun Nov 1 21:24:56 2026 From: urchlay at slackware.uk (B. Watson) Date: Sun, 1 Nov 2026 16:24:56 -0500 (EST) Subject: [Slackbuilds-users] Gridcoin-Research-5.5.1 EOL In-Reply-To: <8f0bfbca-7808-4a9e-8664-43899ca33f86@linuxgalaxy.org> References: <8f0bfbca-7808-4a9e-8664-43899ca33f86@linuxgalaxy.org> Message-ID: <1a88b6d8-e8da-5e20-8fa3-c11ad5569692@slackware.uk> On Sun, 1 Nov 2026, KB_SBo wrote: > Given the above, Gridcoin-Research-5.5.1 is the ** LAST version ** for > Slackware-15.0. Would it be useful to have a file on the web server that lists all the builds that can't be updated for 15.0? I've got quite a few of them, myself. Your README could have the URL... all of them could. Might save us from getting emails about "why don't you upgrade this?" From sbo at linuxgalaxy.org Sun Nov 1 21:40:38 2026 From: sbo at linuxgalaxy.org (KB_SBo) Date: Sun, 01 Nov 2026 21:40:38 +0000 Subject: [Slackbuilds-users] Gridcoin-Research-5.5.1 EOL In-Reply-To: <1a88b6d8-e8da-5e20-8fa3-c11ad5569692@slackware.uk> References: <8f0bfbca-7808-4a9e-8664-43899ca33f86@linuxgalaxy.org> <1a88b6d8-e8da-5e20-8fa3-c11ad5569692@slackware.uk> Message-ID: On 11/1/26 13:24, B. Watson wrote: > > > On Sun, 1 Nov 2026, KB_SBo wrote: > >> Given the above, Gridcoin-Research-5.5.1 is the ** LAST version ** for >> Slackware-15.0. > > Would it be useful to have a file on the web server that lists all > the builds that can't be updated for 15.0? I've got quite a few of > them, myself. > > Your README could have the URL... all of them could. Might save us > from getting emails about "why don't you upgrade this?" > That would be nice. A list of the "damned". I just don't have the bandwidth to stick special versions in /opt just to get it all working. -kb. From jebrhansen+SBo at gmail.com Mon Nov 2 03:45:28 2026 From: jebrhansen+SBo at gmail.com (Jeremy Hansen) Date: Sun, 1 Nov 2026 19:45:28 -0800 Subject: [Slackbuilds-users] Gridcoin-Research-5.5.1 EOL In-Reply-To: References: <8f0bfbca-7808-4a9e-8664-43899ca33f86@linuxgalaxy.org> <1a88b6d8-e8da-5e20-8fa3-c11ad5569692@slackware.uk> Message-ID: On Sun, Nov 1, 2026, 1:40?PM KB_SBo wrote: > On 11/1/26 13:24, B. Watson wrote: > > > > > > On Sun, 1 Nov 2026, KB_SBo wrote: > > > >> Given the above, Gridcoin-Research-5.5.1 is the ** LAST version ** for > >> Slackware-15.0. > > > > Would it be useful to have a file on the web server that lists all > > the builds that can't be updated for 15.0? I've got quite a few of > > them, myself. > > > > Your README could have the URL... all of them could. Might save us > > from getting emails about "why don't you upgrade this?" > > > > That would be nice. A list of the "damned". > > I just don't have the bandwidth to stick special versions in /opt just > to get it all working. > I try to reflect it all in the README and then create a file in my git tree called cant-update with the reason in there. Then, when I'm perusing repology for updates, I can run git status and see which ones I can skip (after I got to over 25 that couldn't be updated, I couldn't remember all without checking READMEs, which slows down the process). I'm currently at 41 that I documented are stuck on older versions using the cant-update method (although, there are others that I could always remember and didn't add the file), most due to needing a newer python. academic/python3-scipy graphics/XnViewMP misc/recode multimedia/picard python/python2-BeautifulSoup4 python/python2-soupsieve python/python3-PyGithub python/python3-beniget python/python3-cachetools python/python3-caldav python/python3-cssselect python/python3-deprecated python/python3-dogpile.cache python/python3-evdev python/python3-filelock python/python3-gast python/python3-hishel python/python3-icalendar-searcher python/python3-id python/python3-iniconfig python/python3-jedi python/python3-knowit python/python3-levenshtein python/python3-llvmlite python/python3-pandas python/python3-pdm python/python3-pint python/python3-platformdirs python/python3-pluggy python/python3-pychromecast python/python3-pyproject-api python/python3-pysubs2 python/python3-pytest python/python3-pythran python/python3-qbittorrent-api python/python3-soundfile python/python3-soupsieve python/python3-stevedore python/python3-tox python/python3-trakit python/scikit-learn Jeremy > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rizitis at gmail.com Mon Nov 2 10:47:06 2026 From: rizitis at gmail.com (Yiannis) Date: Mon, 2 Nov 2026 12:47:06 +0200 Subject: [Slackbuilds-users] Unsupported on 32-bit due to dependencies In-Reply-To: <20261101191431.180a779f@home.slackie.org> References: <20261101191431.180a779f@home.slackie.org> Message-ID: libraries/libcamera fixed https://github.com/SlackBuildsOrg/slackbuilds/pull/18519 thanks ???? ??? 1 ??? 2026 ???? 2:14??.?., ?/? Willy Sudiarto Raharjo < willysr at slackbuilds.org> ??????: > >office/ProjectLibre > >system/distrobox > > This 2 are mine, so i changed it already > > > -- > Willy Sudiarto Raharjo > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From urchlay at slackware.uk Tue Nov 3 00:01:12 2026 From: urchlay at slackware.uk (B. Watson) Date: Mon, 2 Nov 2026 19:01:12 -0500 (EST) Subject: [Slackbuilds-users] repo.or.cz no longer wget-friendly Message-ID: <6879d98-52f0-cb30-85a5-362af9795af7@slackware.uk> repo.or.cz now uses Anubis, even for .tar.gz files. I've had to self-host the sources for ngjackspa and elinks. Right now, this doesn't affect anyone but me, but it's something for maintainers to be aware of. Please don't submit any new builds that use repo.or.cz for DOWNLOAD or DOWNLOAD_x86_64. From milgram at cgpp.com Tue Nov 3 13:45:41 2026 From: milgram at cgpp.com (J. Milgram) Date: Tue, 3 Nov 2026 08:45:41 -0500 Subject: [Slackbuilds-users] Difficulty building graphviz 16.0.0 Message-ID: <813c8418-caba-43dd-84de-a7bccf5b50bf@cgpp.com> On a Slack 15-stable system... graphviz 16.0.0 slackbuild fails. Anyone seen this, have any insights or suggestions? Ultimately working towards FlightGear. FWIW, my php is stock Slack 15: php82-8.2.35-x86_64-1_slack15.0 thanks Judah tail end of build output: ? CXX? ? ? libgv_php_la-gv_php.lo gv_php.cpp:772:3: error: #error These bindings need PHP7 - to generate PHP5 bindings use: SWIG < 4.0.0 and swig -php5 ? 772 | # error These bindings need PHP7 - to generate PHP5 bindings use: SWIG < 4.0.0 and swig -php5 ? ? ? |? ?^~~~~ gv_php.cpp: In function ?int SWIG_ConvertPtr(zval*, void**, swig_type_info*, int)?: gv_php.cpp:963:54: error: cannot convert ?zval*? {aka ?_zval_struct*?} to ?zend_object*? {aka ?_zend_object*?} in argument passing ? 963 |? ? ? ?HashTable * ht = Z_OBJ_HT_P(z)->get_properties(z); ? ? ? |? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ^ ? ? ? |? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ? ? |? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? zval* {aka _zval_struct*} gv_php.cpp: At global scope: gv_php.cpp:5392:2: error: ?ZEND_ARG_PASS_INFO? was not declared in this scope; did you mean ?ZEND_ARG_OBJ_INFO?? ?5392 |? ZEND_ARG_PASS_INFO(0) make[5]: *** [Makefile:2020: libgv_php_la-gv_php.lo] Error 1 make[5]: *** Waiting for unfinished jobs.... make[5]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' make[4]: *** [Makefile:2411: all-recursive] Error 1 make[4]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' make[3]: *** [Makefile:1042: all] Error 2 make[3]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' make[2]: *** [Makefile:601: all-recursive] Error 1 make[2]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg' make[1]: *** [Makefile:750: all-recursive] Error 1 make[1]: Leaving directory '/tmp/SBo/graphviz-16.0.0' make: *** [Makefile:581: all] Error 2 From matteo.bernardini at gmail.com Tue Nov 3 14:03:31 2026 From: matteo.bernardini at gmail.com (Matteo Bernardini) Date: Tue, 3 Nov 2026 15:03:31 +0100 Subject: [Slackbuilds-users] Difficulty building graphviz 16.0.0 In-Reply-To: <813c8418-caba-43dd-84de-a7bccf5b50bf@cgpp.com> References: <813c8418-caba-43dd-84de-a7bccf5b50bf@cgpp.com> Message-ID: hi Judah, that's not the stock php, it's the one from /extra: the stock one is /patches/packages/php-7.4.33-x86_64-4_slack15.0.txz Matteo Il giorno mar 3 nov 2026 alle ore 14:45 J. Milgram via SlackBuilds-users < slackbuilds-users at slackbuilds.org> ha scritto: > > On a Slack 15-stable system... > > graphviz 16.0.0 slackbuild fails. Anyone seen this, have any insights or > suggestions? Ultimately working towards FlightGear. > > FWIW, my php is stock Slack 15: php82-8.2.35-x86_64-1_slack15.0 > > thanks > Judah > > > tail end of build output: > > CXX libgv_php_la-gv_php.lo > gv_php.cpp:772:3: error: #error These bindings need PHP7 - to generate > PHP5 bindings use: SWIG < 4.0.0 and swig -php5 > 772 | # error These bindings need PHP7 - to generate PHP5 bindings > use: SWIG < 4.0.0 and swig -php5 > | ^~~~~ > gv_php.cpp: In function ?int SWIG_ConvertPtr(zval*, void**, > swig_type_info*, int)?: > gv_php.cpp:963:54: error: cannot convert ?zval*? {aka ?_zval_struct*?} > to ?zend_object*? {aka ?_zend_object*?} in argument passing > 963 | HashTable * ht = Z_OBJ_HT_P(z)->get_properties(z); > | ^ > | | > | zval* {aka > _zval_struct*} > gv_php.cpp: At global scope: > gv_php.cpp:5392:2: error: ?ZEND_ARG_PASS_INFO? was not declared in this > scope; did you mean ?ZEND_ARG_OBJ_INFO?? > 5392 | ZEND_ARG_PASS_INFO(0) > > > > make[5]: *** [Makefile:2020: libgv_php_la-gv_php.lo] Error 1 > make[5]: *** Waiting for unfinished jobs.... > make[5]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' > make[4]: *** [Makefile:2411: all-recursive] Error 1 > make[4]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' > make[3]: *** [Makefile:1042: all] Error 2 > make[3]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' > make[2]: *** [Makefile:601: all-recursive] Error 1 > make[2]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg' > make[1]: *** [Makefile:750: all-recursive] Error 1 > make[1]: Leaving directory '/tmp/SBo/graphviz-16.0.0' > make: *** [Makefile:581: all] Error 2 > > > > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From slack at giand.it Tue Nov 3 20:01:02 2026 From: slack at giand.it (=?UTF-8?Q?Giancarlo_Dess=C3=AC?=) Date: Tue, 3 Nov 2026 21:01:02 +0100 Subject: [Slackbuilds-users] Unsupported on 32-bit due to dependencies In-Reply-To: References: Message-ID: <3c2fb1e9-5cd3-41fc-9608-e7621fae8038@giand.it> Il 01/11/26 07:59, B. Watson ha scritto: > > This came up a week ago or so... someone was asked to mark a new > submission as unsupported on 32-bit, because one of its dependencies > was 64-bit only (probably rust-opt, can't remember now). > > So here's a list of existing builds that have the same issue: listed > as supporting 32-bit, but have dependencies that are 64-bit-only. I > was surprised to find my own pipe-viewer on this list (it wasn't > 64-bit-only when I first submitted it), some of you may be surprised, > too. > > Maintainers of these builds, do any of you object to them being marked > as 64-bit-only? The ones that depend on qt6 will have to be changed > back someday, when/if we manage to get qt6 to build for 32-bit on > 15.0 (is anyone working on this?), and definitely when Slackware 16.0 > releases, with qt6 in the 32-bit OS. I think it's worth doing anyway. > > The list: > > academic/lammps > libraries/MDI_Library > I'm the maintainers of these packages. A long time is passed after the last submission, I will update them as soon as possible. Unfortunately at the moment I can't test the build in Slackware 32-bit (running on a VM) due a problem with the connection from the host after a new installation. I have to this issue. These packages do not depend on qt6, but depends on openmpi that after the update to version 5 is not more compatible with 32 bit systems. This should be solved changing the info file setting openmpi4 instead of openmpi but I have to test it to be sure that this remove any problems. At the moment I could send another submission setting UNSUPPORTED for Slackware 32-bit until I will solve my problems in the virtual machine. -- ********************************************************* Giancarlo Dess? https://www.giand.it https://github.com/giandex Slackware Linux... because it works! ********************************************************* From milgram at cgpp.com Wed Nov 4 14:33:21 2026 From: milgram at cgpp.com (J. Milgram) Date: Wed, 4 Nov 2026 09:33:21 -0500 Subject: [Slackbuilds-users] [Solved] Difficulty building graphviz 16.0.0 In-Reply-To: References: <813c8418-caba-43dd-84de-a7bccf5b50bf@cgpp.com> Message-ID: <7d538dfa-60d4-464d-9476-46c16f7e51c7@cgpp.com> Matteo, Well, that explains it, thanks! No idea why I installed that package from extras/. Probably just w-got the wrong package in the upgrade following the recent security excitement. I should just let slackpkg get the packages for me. No matter, installed the correct one, and graphviz builds & installs like a champ. Thanks again... Judah On 11/3/26 09:03, Matteo Bernardini wrote: > hi Judah, > > that's not the stock php, it's the one from /extra: the stock one is > /patches/packages/php-7.4.33-x86_64-4_slack15.0.txz > > Matteo > > Il giorno mar 3 nov 2026 alle ore 14:45 J. Milgram via > SlackBuilds-users ha scritto: > > > On a Slack 15-stable system... > > graphviz 16.0.0 slackbuild fails. Anyone seen this, have any > insights or > suggestions? Ultimately working towards FlightGear. > > FWIW, my php is stock Slack 15: php82-8.2.35-x86_64-1_slack15.0 > > thanks > Judah > > > tail end of build output: > > ?? CXX? ? ? libgv_php_la-gv_php.lo > gv_php.cpp:772:3: error: #error These bindings need PHP7 - to > generate > PHP5 bindings use: SWIG < 4.0.0 and swig -php5 > ?? 772 | # error These bindings need PHP7 - to generate PHP5 bindings > use: SWIG < 4.0.0 and swig -php5 > ?? ? ? |? ?^~~~~ > gv_php.cpp: In function ?int SWIG_ConvertPtr(zval*, void**, > swig_type_info*, int)?: > gv_php.cpp:963:54: error: cannot convert ?zval*? {aka > ?_zval_struct*?} > to ?zend_object*? {aka ?_zend_object*?} in argument passing > ?? 963 |? ? ? ?HashTable * ht = Z_OBJ_HT_P(z)->get_properties(z); > ?? ? ? | ^ > ?? ? ? | | > ?? ? ? | zval* {aka > _zval_struct*} > gv_php.cpp: At global scope: > gv_php.cpp:5392:2: error: ?ZEND_ARG_PASS_INFO? was not declared in > this > scope; did you mean ?ZEND_ARG_OBJ_INFO?? > ??5392 |? ZEND_ARG_PASS_INFO(0) > > > > make[5]: *** [Makefile:2020: libgv_php_la-gv_php.lo] Error 1 > make[5]: *** Waiting for unfinished jobs.... > make[5]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' > make[4]: *** [Makefile:2411: all-recursive] Error 1 > make[4]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' > make[3]: *** [Makefile:1042: all] Error 2 > make[3]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg/gv' > make[2]: *** [Makefile:601: all-recursive] Error 1 > make[2]: Leaving directory '/tmp/SBo/graphviz-16.0.0/tclpkg' > make[1]: *** [Makefile:750: all-recursive] Error 1 > make[1]: Leaving directory '/tmp/SBo/graphviz-16.0.0' > make: *** [Makefile:581: all] Error 2 > > > > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > -- ===== milgram at cgpp.com 301-257-7069 From 414N at slacky.it Wed Nov 4 15:23:59 2026 From: 414N at slacky.it (414N) Date: Wed, 4 Nov 2026 16:23:59 +0100 Subject: [Slackbuilds-users] Unsupported on 32-bit due to dependencies In-Reply-To: References: Message-ID: <61999093-a2ab-445b-a9d7-c8fefdd256e0@slacky.it> Il 01/11/26 07:59, B. Watson ha scritto: > graphics/yafaray-blender I guess the easy fix for this would be to switch to the "Blender" source package in the DEPENDENCIES, however I'd be more in favor to pass the torch for both yafaray and yafaray-blender or directly orphaning them, as I've not been using them for quite a long time. From what I can gather, the yafaray project itself is actually on hiatus with the development of version 4. Also, the current version of the yafaray-blender addon/plugin on SBo is meant for the now ancient 2.x blender versions and can't work with blender 5.x. -- Alan Alberghini SBo clone: https://github.com/414n/slackbuilds From pyllyukko at maimed.org Wed Nov 4 20:32:59 2026 From: pyllyukko at maimed.org (pyllyukko) Date: Wed, 4 Nov 2026 22:32:59 +0200 Subject: [Slackbuilds-users] new version for perl-Export-Tiny In-Reply-To: <20261026170117.906bf92dcd246a75044afcb1@misouk.com> References: <20261026170117.906bf92dcd246a75044afcb1@misouk.com> Message-ID: Ehlo. On Mon, Oct 26, 2026 at 05:01:17PM +0400, Mab974 wrote: > I need a recent version of Exporter::Tiny in perl-Type-Tiny (new build). > Is that possible on your end? I tried the latest version 1.006003, which > builds well. Few quick comments. The package itself is not perl-Type-Tiny, but perl-Exporter-Tiny[1]. Seems to be out of date and also the HOMEPAGE links to a specific version[2], instead of the generic page[3]. 1: https://slackbuilds.org/repository/15.0/perl/perl-Exporter-Tiny/ 2: https://metacpan.org/pod/release/TOBYINK/Exporter-Tiny-1.000000/lib/Exporter/Tiny.pm 3: https://metacpan.org/pod/Exporter::Tiny -- pyllyukko email: PGP: https://keybase.io/pyllyukko -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: From urchlay at slackware.uk Wed Nov 4 22:58:46 2026 From: urchlay at slackware.uk (B. Watson) Date: Wed, 4 Nov 2026 17:58:46 -0500 (EST) Subject: [Slackbuilds-users] new version for perl-Export-Tiny In-Reply-To: References: <20261026170117.906bf92dcd246a75044afcb1@misouk.com> Message-ID: On Wed, 4 Nov 2026, pyllyukko wrote: > On Mon, Oct 26, 2026 at 05:01:17PM +0400, Mab974 wrote: >> I need a recent version of Exporter::Tiny in perl-Type-Tiny (new build). > > The package itself is not perl-Type-Tiny, but perl-Exporter-Tiny[1]. I think he means, he's working on a perl-Type-Tiny build (not yet submitted), which needs a newer perl-Exporter-Tiny. > Seems to be out of date and also the HOMEPAGE links to a specific > version[2], instead of the generic page[3]. Yeah, that's weird. perl-Exporter-Tiny was originally David Somero's build. Mario took it over to save it from being orphaned, so it's not really his fault it was done that way... Mario, you wouldn't mind updating it, would you? From urchlay at slackware.uk Wed Nov 4 23:34:54 2026 From: urchlay at slackware.uk (B. Watson) Date: Wed, 4 Nov 2026 18:34:54 -0500 (EST) Subject: [Slackbuilds-users] Duplicate perl-Tidy builds Message-ID: <228d6411-d7ec-1195-e369-fa56dcdd763a@slackware.uk> We have both perl/perl-Tidy and perl/perl-Perl-Tidy. These are the same thing, except perl-Perl-Tidy is an older version (20240903). Unless someone has a good reason not to do this, I'm going to remove perl-Perl-Tidy. It has one dependee, perl-Perl-Critic, which will be changed so it depends on perl-Tidy instead. From mario at slack.build Thu Nov 5 00:49:28 2026 From: mario at slack.build (Mario) Date: Thu, 5 Nov 2026 01:49:28 +0100 Subject: [Slackbuilds-users] new version for perl-Export-Tiny In-Reply-To: References: <20261026170117.906bf92dcd246a75044afcb1@misouk.com> Message-ID: <73317660-d7e9-4eb6-b7b0-0053c73411db@slack.build> On 11/4/26 11:58 PM, B. Watson wrote: > On Wed, 4 Nov 2026, pyllyukko wrote: > >> On Mon, Oct 26, 2026 at 05:01:17PM +0400, Mab974 wrote: >>> I need a recent version of Exporter::Tiny in perl-Type-Tiny (new build). >> >> The package itself is not perl-Type-Tiny, but perl-Exporter-Tiny[1]. > > I think he means, he's working on a perl-Type-Tiny build (not yet > submitted), which needs a newer perl-Exporter-Tiny. Yeah, I had to re-read the thread until it made sense :) >> Seems to be out of date and also the HOMEPAGE links to a specific >> version[2], instead of the generic page[3]. > > Yeah, that's weird. > > perl-Exporter-Tiny was originally David Somero's build. Mario took it > over to save it from being orphaned, so it's not really his fault it > was done that way... > > Mario, you wouldn't mind updating it, would you? The update is in my branch. -- Mario From urchlay at slackware.uk Thu Nov 5 01:02:10 2026 From: urchlay at slackware.uk (B. Watson) Date: Wed, 4 Nov 2026 20:02:10 -0500 (EST) Subject: [Slackbuilds-users] Perl update checker script Message-ID: I wrote this a while back, might as well share it... https://slackware.uk/~urchlay/repos/ck4up-config/plain/perlupd It takes a maintainer name (or -a for all maintainers) and checks CPAN for updated versions of Perl modules. For each new version, it gives the version number and the download URL, which makes updating the SlackBuild easy. It's not perfect: the SBo build names don't always map to the CPAN package names in an obvious way, and a few things in our perl/ category aren't on CPAN at all. Still, it should be useful. About the request for an updated perl-Exporter-Tiny, it did spot this: perl-Exporter-Tiny: outdated 1.000000, avail 1.006003 https://cpan.metacpan.org/authors/id/T/TO/TOBYINK/Exporter-Tiny-1.006003.tar.gz From mab974 at misouk.com Thu Nov 5 04:59:24 2026 From: mab974 at misouk.com (Mab974) Date: Thu, 5 Nov 2026 08:59:24 +0400 Subject: [Slackbuilds-users] Duplicate perl-Tidy builds In-Reply-To: <228d6411-d7ec-1195-e369-fa56dcdd763a@slackware.uk> References: <228d6411-d7ec-1195-e369-fa56dcdd763a@slackware.uk> Message-ID: <20261105085924.aac9c7eafd8d536dd0a27294@misouk.com> Selon "B. Watson" : > > We have both perl/perl-Tidy and perl/perl-Perl-Tidy. These are the > same thing, except perl-Perl-Tidy is an older version (20240903). > > Unless someone has a good reason not to do this, I'm going to remove > perl-Perl-Tidy. It has one dependee, perl-Perl-Critic, which will be > changed so it depends on perl-Tidy instead. I had noticed it. Both produce an executable perltidy. I suppose that originally we hesitated between the Perl-Tidy program and the perl-Perl-tidy module. I sometimes have trouble with this rule: perl-Mojolicious could lead us to name perl-Minion and perl-Dancer2. What does the prefix perl- mean exactly? Should this slackbuild be named Perl-Tidy, based on CPAN ? > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > -*- Mab974 From milgram at cgpp.com Thu Nov 5 05:01:29 2026 From: milgram at cgpp.com (J. Milgram) Date: Thu, 5 Nov 2026 00:01:29 -0500 Subject: [Slackbuilds-users] FlightGear Message-ID: <87e0de2c-2e3f-42d8-8333-739e5bad6d99@cgpp.com> Getting an error building FlightGear v2024.1.1: /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.c:262:5: error: conflicting types for ?openal_initialize?; have ?int(struct iaxc_audio_driver *, int)? ? 262 | int openal_initialize(struct iaxc_audio_driver *d, int sample_rate) ? ? ? |? ? ?^~~~~~~~~~~~~~~~~ In file included from /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/iaxclient_lib.h:246, ? ? ? ? ? ? ? ? ?from /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.c:1: /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.h:4:5: note: previous declaration of ?openal_initialize? with type ?int(void)? ? ? 4 | int openal_initialize(); Anyone else seeing this? Should I try to patch audio_openal.h to make the declarations align, or is there some easier fix? thanks! Judah -- ===== milgram at cgpp.com 301-257-7069 From urchlay at slackware.uk Thu Nov 5 06:24:07 2026 From: urchlay at slackware.uk (B. Watson) Date: Thu, 5 Nov 2026 01:24:07 -0500 (EST) Subject: [Slackbuilds-users] Duplicate perl-Tidy builds In-Reply-To: <20261105085924.aac9c7eafd8d536dd0a27294@misouk.com> References: <228d6411-d7ec-1195-e369-fa56dcdd763a@slackware.uk> <20261105085924.aac9c7eafd8d536dd0a27294@misouk.com> Message-ID: On Thu, 5 Nov 2026, Mab974 wrote: > I suppose that originally we hesitated between the Perl-Tidy program and > the perl-Perl-tidy module. I sometimes have trouble with this rule: > perl-Mojolicious could lead us to name perl-Minion and perl-Dancer2. What > does the prefix perl- mean exactly? Should this slackbuild be named > Perl-Tidy, based on CPAN ? Nobody ever explicitly made a rule, so peoples' interpretations vary. One way to look at it would be: - always prefix with perl- - add the CPAN name, with any :: turned into - ...which is how we arrived at perl-Perl-Tidy. A variant of that: use the lowercased form of the CPAN name. If I had been the one to submit that build, it would likely have been called perl-tidy or (maybe, doubtfully) perl-perl-tidy, because I always hated MixedCase in package names... Whoever came up with "perl-Tidy" probably decided it seemed redundant to use "perl-Perl-Tidy" or "perl-perl-tidy". If I were starting from scratch and inventing a rule *now*, I might say that all builds whose source comes from CPAN should be called cpan-* instead of perl-* (since perl/ is already the category). But, too late to change it now, more work than it would be worth, if indeed it's worth anything at all. The script I posted earlier (perlupd) tries to guess the SBo names, based on the CPAN names, but it cheats a little by having a short list of hardcoded names that don't fit the pattern. From list+sbo at vahedi.org Thu Nov 5 11:46:07 2026 From: list+sbo at vahedi.org (Shahab Vahedi) Date: Thu, 05 Nov 2026 11:46:07 +0000 Subject: [Slackbuilds-users] LibreOffice checksum mismatch Message-ID: <2b9b5229490b08cc183272b40e46d7c5d0d39fc0@vahedi.org> Length: 254462716 (243M) [application/x-gzip] Saving to: ?LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz? LibreOffice_26.8.2_ 100%[===================>] 242.67M 48.3MB/s in 6.7s 2026-11-05 (36.3 MB/s) - ?LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz? saved [254462716/254462716] Found LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz in /var/cache/sbopkg. Checking MD5SUM: MD5SUM check for LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz ... FAILED! Expected: fcbfa208b0c79ccc354f870bf58f6432 Found: e4c7ab00399f5a441dbbd36ec0123a6a -Shahab From mm at dorfdsl.de Thu Nov 5 15:05:37 2026 From: mm at dorfdsl.de (Marco Moock) Date: Thu, 5 Nov 2026 16:05:37 +0100 Subject: [Slackbuilds-users] FlightGear In-Reply-To: <87e0de2c-2e3f-42d8-8333-739e5bad6d99@cgpp.com> References: <87e0de2c-2e3f-42d8-8333-739e5bad6d99@cgpp.com> Message-ID: <18574d1c-5585-4775-bf08-6cf8b497c3c3@dorfdsl.de> Am 05.11.26 um 06:01 schrieb J. Milgram via SlackBuilds-users: > > Getting an error building FlightGear v2024.1.1: > > /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/ > audio_openal.c:262:5: error: conflicting types for ?openal_initialize?; > have ?int(struct iaxc_audio_driver *, int)? > ? 262 | int openal_initialize(struct iaxc_audio_driver *d, int > sample_rate) > ? ? ? |? ? ?^~~~~~~~~~~~~~~~~ > In file included from /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ > lib/iaxclient_lib.h:246, > ? ? ? ? ? ? ? ? ?from /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ > lib/audio_openal.c:1: > /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.h:4:5: > note: previous declaration of ?openal_initialize? with type ?int(void)? > ? ? 4 | int openal_initialize(); > > > Anyone else seeing this? > > Should I try to patch audio_openal.h to make the declarations align, or > is there some easier fix? Did you figure out if that is an issue of FlightGear or an external library? -- Gru? Marco Muell und Spam bitte an abfalleimer2002 at stinkedores.dorfdsl.de -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature.asc Type: application/pgp-signature Size: 665 bytes Desc: OpenPGP digital signature URL: From milgram at cgpp.com Thu Nov 5 19:30:40 2026 From: milgram at cgpp.com (J. Milgram) Date: Thu, 5 Nov 2026 14:30:40 -0500 Subject: [Slackbuilds-users] FlightGear In-Reply-To: <18574d1c-5585-4775-bf08-6cf8b497c3c3@dorfdsl.de> References: <87e0de2c-2e3f-42d8-8333-739e5bad6d99@cgpp.com> <18574d1c-5585-4775-bf08-6cf8b497c3c3@dorfdsl.de> Message-ID: <472a3543-4202-49cb-947f-56ebed4728d8@cgpp.com> As near as I can tell, it's in iaxclient which is (apparently) an external library bundled with the FlightGear source. Haven't figured out which version of iaxclient comes with FlightGear but looking at the v2.0.2 source from https://sourceforge.net/projects/iaxclient/ it looks like the declarations match. I guess the next step is to see if the official iaxclient builds... Will report back. JM On 11/5/26 10:05, Marco Moock wrote: > Am 05.11.26 um 06:01 schrieb J. Milgram via SlackBuilds-users: >> >> Getting an error building FlightGear v2024.1.1: >> >> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/ >> audio_openal.c:262:5: error: conflicting types for >> ?openal_initialize?; have ?int(struct iaxc_audio_driver *, int)? >> ?? 262 | int openal_initialize(struct iaxc_audio_driver *d, int >> sample_rate) >> ?? ? ? |? ? ?^~~~~~~~~~~~~~~~~ >> In file included from >> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ >> lib/iaxclient_lib.h:246, >> ?? ? ? ? ? ? ? ? ?from >> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ lib/audio_openal.c:1: >> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.h:4:5: >> note: previous declaration of ?openal_initialize? with type ?int(void)? >> ?? ? 4 | int openal_initialize(); >> >> >> Anyone else seeing this? >> >> Should I try to patch audio_openal.h to make the declarations align, >> or is there some easier fix? > > Did you figure out if that is an issue of FlightGear or an external > library? > > > _______________________________________________ > SlackBuilds-users mailing list > SlackBuilds-users at slackbuilds.org > https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users > Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ > FAQ - https://slackbuilds.org/faq/ > From willysr at slackbuilds.org Sat Nov 7 02:01:40 2026 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 7 Nov 2026 09:01:40 +0700 Subject: [Slackbuilds-users] LibreOffice checksum mismatch In-Reply-To: <2b9b5229490b08cc183272b40e46d7c5d0d39fc0@vahedi.org> References: <2b9b5229490b08cc183272b40e46d7c5d0d39fc0@vahedi.org> Message-ID: <20261107090140.1330d20d@home.slackie.org> >Length: 254462716 (243M) [application/x-gzip] >Saving to: ?LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz? > >LibreOffice_26.8.2_ 100%[===================>] 242.67M 48.3MB/s in 6.7s > >2026-11-05 (36.3 MB/s) - ?LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz? saved >[254462716/254462716] > >Found LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz in /var/cache/sbopkg. >Checking MD5SUM: > MD5SUM check for LibreOffice_26.8.2_Linux_x86-64_rpm.tar.gz ... FAILED! > Expected: fcbfa208b0c79ccc354f870bf58f6432 > Found: e4c7ab00399f5a441dbbd36ec0123a6a This is an accidental commit. I have reverted it. For stable, it will stick to previous release newer version requires newer GLIBC -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 870 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sat Nov 7 02:27:35 2026 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sat, 7 Nov 2026 09:27:35 +0700 Subject: [Slackbuilds-users] Updates - 20261107.1 Message-ID: <20261107092735.141d2d63@home.slackie.org> As mentioned few days ago, we will perform some maintenance on SBo infrastructure after this public update, so submission is now closed until maintenance is over. We will send a different email once the maintenance period is done. During this period, no new submission can be submitted. Updates can be sent go via github/gitlab/codeberg PR/MR. happy weekend :) Sat Nov 7 02:12:22 UTC 2026 academic/Gridcoin-Research: Updated Readme academic/MetaPhlAn2: Mark as 64-bit only. academic/PhyML: Mark as 64-bit only. academic/RAxML: Mark as 64-bit only. academic/bcftools: Updated to version 1.25 academic/bibus: Email removed (Request by maintainer). academic/calc: Updated for version 2.17.0.2 academic/extrema: Email removed (Request by maintainer). academic/fastqc: Updated for version 0.13.0 academic/free42: Updated for version 3.5.1 academic/glpk: Email removed (Request by maintainer). academic/hyphy: Mark as 64-bit only. academic/lammps: Marked as x86_64 only academic/locarna: Set to 64-bit only in locarna.info academic/meme-suite: Mark as 64-bit only. academic/ngspice-wave: Updated for version 0.1.3. academic/plus42: Updated for version 1.5.1 academic/pysam: Updated for version 0.24.1 academic/qhull: Email removed (Request by maintainer). academic/samtools: Updated for version 1.25 academic/seaview: Mark as 64-bit only. audio/bluplay: Updated for version 0.3.0. audio/carla: Update README (pyliblo => python3-pyliblo2). audio/clementine: Revert back to 1.4.1 to not require qt6 audio/drumkv1: Updated for version 1.5.1. audio/gtklick: Update dependencies (pyliblo => python2-pyliblo). audio/mac: Updated for version 13.45. audio/mididings: Update dependencies (pyliblo => python3-pyliblo). audio/ngjackspa: Use wget-friendly download. audio/padthv1: Updated for version 1.5.1. audio/patchage: Email removed (Request by maintainer). audio/reaper: Updated for version 7.85 audio/samplv1: Updated for version 1.5.1. audio/synthv1: Updated for version 1.5.1. audio/tagtool: Email removed (Request by maintainer). audio/vamp-plugin-sdk: Email removed (Request by maintainer). audio/xmp: Updated for version 4.3.1, new maintainer. desktop/ClamAV-GUI: Marked as x86_64 only desktop/cellwriter: Email removed (Request by maintainer). desktop/cinnamon-desktop: Updated for version 6.8.0 desktop/dwm: Email removed (Request by maintainer). desktop/enlightenment: Email removed (Request by maintainer). desktop/fedora-wallpapers: Added (New wallpaper). desktop/gmrun: Email removed (Request by maintainer). desktop/gtk-engines: Email removed (Request by maintainer). desktop/insync-thunar: Mark as 64-bit only. desktop/lumina: Email removed (Request by maintainer). desktop/ratpoison: Email removed (Request by maintainer). desktop/superkey-launch: Email removed (Request by maintainer). desktop/wmpulsemixer: Updated for version 0.2.2 desktop/x-tile: Email removed (Request by maintainer). desktop/yaru-icon-theme: Updated for version 26.10.3 development/Kiro: Updated for version 1.4.121. development/Kiro: Updated for version 1.4.86. development/alire: Updated for version 2.1.1 development/antigravity-cli: Updated for version 1.4.12 development/antigravity: Updated for version 2.28.2 development/aws-cdk: Updated for version 2.1148.0. development/bfg: Email removed (Request by maintainer). development/bigloo: Email removed (Request by maintainer). development/bluefish: Email removed (Request by maintainer). development/cpan2tgz: Updated for version 20261102_ccb86bd development/cudatoolkit_13: Updated for version 13.5.0 development/d-tools: Updated for version 2.114.0 development/dmd: Updated for version 2.114.0 development/dub: Updated for version 1.43.0 development/ebe: Email removed (Request by maintainer). development/electron-bin: Updated for version 45.2.2 development/enki: Email removed (Request by maintainer). development/gauche: Email removed (Request by maintainer). development/gcli: Updated for version 2.14.0. development/geany-plugins: Email removed (Request by maintainer). development/geany: Email removed (Request by maintainer). development/gisto: Email removed (Request by maintainer). development/gitnuro: Updated for version 2.1.0 development/go-size-analyzer: Added (Go Analyzer). development/gosec: Added (Go source security analyser). development/gtkextra: Email removed (Request by maintainer). development/heroku-cli: Updated for version 11.12.1. development/hexedit: Email removed (Request by maintainer). development/jsmin: Email removed (Request by maintainer). development/kube-score: Added (Kubernetes manifest analyzer). development/letos: Updated for version 4.0.4 development/lighttable: Email removed (Request by maintainer). development/medit: Email removed (Request by maintainer). development/mit-scheme: Email removed (Request by maintainer). development/ninja-ide: Email removed (Request by maintainer). development/nodejs22: Email removed (Request by maintainer). development/notepad++: Updated for version 8.9.9 development/pycharm: Updated for version 2026.2.4 development/quilt: Email removed (Request by maintainer). development/scite: Email removed (Request by maintainer). development/scite: Updated for version 5.6.8. development/shfmt: Added (Shell parser, formatter, and interpreter). development/smalltalk: Email removed (Request by maintainer). development/spin: Email removed (Request by maintainer). development/sqlitebrowser: Email removed (Request by maintainer). development/src-vcs: Email removed (Request by maintainer). development/textadept: Email removed (Request by maintainer). development/uemacs: Email removed (Request by maintainer). development/vscode-bin: Updated for version 1.145.1. development/vscodium: Updated for version 1.143.17232. development/xasm: Updated for version 3.3.0. development/xxd-standalone: Add README note about versions. development/zizmor: Updated for version 1.32.0. development/zulu-openjdk17: Updated for version 17.0.21.0.3. development/zulu-openjdk21: Updated for version 21.0.13.0.3. development/zulu-openjdk25: Updated for version 25.0.5.0.3. games/VASSAL: Updated for version 3.8.0 games/alienarena: Version bump to 7.72.4 games/freeciv: Email removed (Request by maintainer). games/gbrainy: Email removed (Request by maintainer). games/lutris: Email removed (Request by maintainer). games/nsudoku: Email removed (Request by maintainer). games/openmsx: Updated for version 22.0 games/pysolfc: Updated for version 3.7.0. games/sameboy: Updated for version 1.0.5. games/simsu: Email removed (Request by maintainer). games/supertuxkart: Email removed (Request by maintainer). gis/TauDEM: Mark as 64-bit only. graphics/Blender: Updated for version 5.2.3 graphics/blender: Email removed (Request by maintainer). graphics/brlcad: Email removed (Request by maintainer). graphics/evolus-pencil: Email removed (Request by maintainer). graphics/mirage: Email removed (Request by maintainer). graphics/pencil3: Removed (Use pencil). graphics/pngquant: Email removed (Request by maintainer). graphics/renderdoc: Updated for version 1.24 graphics/scrot: Email removed (Request by maintainer). graphics/ueberzugpp: Updated for version 2.9.11. graphics/zbar: Updated for version 0.23.95. ham/lpcnetfreedv: use local lpcnet191005 ham/qlog: Updated for version 0.54.2. libraries/GtkD: Mark as 64-bit only. libraries/MDI_Library: Marked as x86_64 only libraries/SDL3: Updated for version 3.4.20 libraries/SDL_gfx: Email removed (Request by maintainer). libraries/afflib: Updated for version 3.7.23. libraries/ahven: Updated for version 2.9 libraries/allegro: Email removed (Request by maintainer). libraries/daq: Updated for version 3.0.29. libraries/dbcsr: Mark as 64-bit only. libraries/fzssh: Updated for version 1.5.1. libraries/ganv: Email removed (Request by maintainer). libraries/giblib: Email removed (Request by maintainer). libraries/gloox: Email removed (Request by maintainer). libraries/htslib: Updated for version 1.25 libraries/imlib2: Email removed (Request by maintainer). libraries/libROM: Mark as 64-bit only. libraries/libcamera: Updated for version 0.8.0 libraries/libdispatch: Updated for version 6.4.2. libraries/libmediainfo: Email removed (Request by maintainer). libraries/libopenshot-audio: Updated for version 1.0.2 libraries/libopenshot: Updated for version 1.1.0 libraries/libtar: Email removed (Request by maintainer). libraries/libversion: Updated for version 3.0.5. libraries/libxmp: Updated for version 4.7.4, new maintainer. libraries/libzen: Email removed (Request by maintainer). libraries/parsec: Mark as 64-bit only. libraries/php-oci8: Mark as 64-bit only. libraries/qt6: Updated for version 6.8.5. libraries/qutepart: Email removed (Request by maintainer). libraries/rabbitmq-c: Updated for version 0.18.1 libraries/scalapack: Mark as 64-bit only. libraries/stormlib: Updated for version 9.40. libraries/ucl: Email removed (Request by maintainer). libraries/unixODBC: Updated for version 2.3.14. libraries/uriparser: Updated for version 1.0.3. misc/SecLists: Updated for version 2026.2. misc/asterixInspector: Email removed (Request by maintainer). misc/dmg2img: Email removed (Request by maintainer). misc/exploitdb: Updated for version 2026_10_27. misc/gcp: Email removed (Request by maintainer). misc/ollama: Updated for version 0.40.15. misc/recode: Email removed (Request by maintainer). misc/stardict: Email removed (Request by maintainer). misc/yubioath-desktop: Updated for version 7.5.0. multimedia/MuseScore: Updated for version 4.7.6 multimedia/devedeng: Updated script multimedia/exaile: Email removed (Request by maintainer). multimedia/freetube: Updated for version 0.26.0. multimedia/gmtp: Email removed (Request by maintainer). multimedia/inputstream.adaptive: Version bump to 21.5.26 multimedia/mediainfo: Email removed (Request by maintainer). multimedia/munt: Updated for version 2.8.3. multimedia/openshot: Updated for version 4.1.0 multimedia/pipe-viewer: Updated for version 0.5.9. multimedia/pitivi: Email removed (Request by maintainer). multimedia/spotify: Email removed (Request by maintainer). multimedia/spotify: Fix post-installation script. multimedia/strawberry: Mark as 64-bit only. network/AdGuardHome: Updated for version 0.107.80. network/Electrum-bin: Set APPIMAGE variable in extracted AppRun. network/LOIC: Email removed (Request by maintainer). network/brave-browser: update to 1.99.55 network/brave-origin: update to 1.99.55 network/cloudflared-bin: Updated for version 2026.10.7. network/conkeror: Removed (orphaned and download is broken). network/discord: Version bump to 1.0.168 network/elinks: Use wget-friendly download. network/etherape: Email removed (Request by maintainer). network/franz: Updated for version 6.11.0. network/gallery-dl: Updated for version 1.32.19 network/geoipupdate: Updated for version 8.0.0 network/helium-browser: Updated for version 0.20.3.1 network/ip2location-c: Email removed (Request by maintainer). network/ipv6calc: Email removed (Request by maintainer). network/librewolf: Updated for version 159.0.1_1 network/metasploit-framework-bin: Updated for version 6.5.9. network/mitmproxy-bin: Add no-upgrade note. network/onedrive: Updated for version 2.5.12 network/opera: Updated for version 139.0.6053.22 network/rtorrent: Updated for version 0.16.27. network/signal-desktop: Updated for version 8.34.0. network/slack: Email removed (Request by maintainer). network/sopcast-player: Removed (never updated since 2011). network/sopcast: Removed (never updated since 2010). network/squid: Updated for version 7.8. network/tailscale: update to 1.104.5 network/teams-for-linux: Updated for version 2.28.0. network/telegram: Updated for version 7.4.0. network/telegram: Updated for version 7.4.1. network/vivaldi: Updated for version 8.3.4191.30. network/vnstat: Updated for version 2.14. network/weechat: Updated for version 4.10.2. network/zen-browser: Updated for version 1.24b network/zoom-linux: Updated for version 7.2.5.6661 office/ProjectLibre: Mark it as x86_64. office/cups-pdf: Updated for version 3.0.3 office/ledger-live: Updated for version 4.26.0 office/libreoffice: Fix accident changes. office/mdp: Email removed (Request by maintainer). office/mupdf: Updated for version 1.28.6. office/openoffice.org: Email removed (Request by maintainer). office/pdfsam-basic: Updated for version 6.0.10 office/qownnotes: Updated for version 26.11.5. office/sigil: Updated for version 2.8.5 office/xpad: Email removed (Request by maintainer). office/zathura: Fix man page generation. office/zettlr: Updated for version 4.9.0. perl/perl-Exporter-Tiny: Updated for version 1.006003. perl/perl-Net-Works: Mark as 64-bit only. perl/perl-Perl-Critic: Use perl-Tidy in REQUIRES. perl/perl-Perl-Tidy: Removed (duplicate of perl-Tidy). perl/perl-Type-Tiny: Added (Built-in types bundle for Type::Tiny) python/pyliblo: Removed (split into python2- and python3-). python/python2-nuitka: Updated for version 4.3.4 python/python2-pyliblo: Added (Replaces old pyliblo for python 2). python/python3-caldav: Downgrade to 2.2.6 due to python3.10 req python/python3-nuitka: Updated for version 4.3.4 python/python3-pyliblo: Added (Replaces old pyliblo for python 3) python/python3-sentry_sdk: Updated for version 2.74.0 python/python3-setuptools-gettext: Removed (maintainer request) python/python3-socks: Updated for version 3.2.1. python/python3-watchdog: Updated README python/subuser: Mark as 64-bit only. python/uv-bin: Updated for version 0.13.7. system/betty: Email removed (Request by maintainer). system/bfs: Updated for version 4.1.6 system/blocaled: Updated for version 0.7. system/burp: Email removed (Request by maintainer). system/cdw: Email removed (Request by maintainer). system/clifm: Updated for verion 1.29. system/conky: Updated for version 1.26.0. system/davfs2: Email removed (Request by maintainer). system/distrobox: Mark it as x86_64. system/dosbox-dev: Email removed (Request by maintainer). system/dosbox: Email removed (Request by maintainer). system/doublecmd-qt5: Updated for version 1.2.10 system/dump: Email removed (Request by maintainer). system/dust: Updated for version 1.2.7. system/file-roller: Email removed (Request by maintainer). system/firejail: Updated for version 0.9.82.2. system/fnt: updated to version 1.9.2 system/fonts-geist: update to 1.9.2 system/google-droid-fonts: Email removed (Request by maintainer). system/incus-ui: Updated for version 20261102_d380b8fd system/incus: Updated for version 7.6 system/jenkins: Updated for version 2.580.2. system/linux-libertine-fonts: Email removed (Request by maintainer). system/mediaextract: Updated for version 1.2.2. system/mongo-tools: Updated for version 100.20.1. system/munin-node: Updated script. system/nemo-fileroller: Updated for version 6.8.0 system/nemo: Updated for version 6.8.1 system/netdata: Updated for version 2.12.3. system/nvidia-driver: Updated for version 620.70.06. system/nvidia-kernel: Updated for version 620.70.06. system/nvidia-legacy390-driver: Avoid spaces on filenames. system/rewise: Updated for version 0.4.0 system/spacefm: Email removed (Request by maintainer). system/tagainijisho: Fix build on -current. system/tarlz: Updated for version 0.32.2. system/tilda: Email removed (Request by maintainer). system/ttf-jigmo: Added (New font). system/ttf-ubuntu-font-family: Email removed. system/unipicker: Added (Unicode character chooser). system/vlock: Email removed (Request by maintainer). system/winetricks: Email removed (Request by maintainer). system/zzzfm: Email removed (Request by maintainer). +--------------------------+ -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 870 bytes Desc: OpenPGP digital signature URL: From willysr at slackbuilds.org Sat Nov 7 17:32:31 2026 From: willysr at slackbuilds.org (Willy Sudiarto Raharjo) Date: Sun, 8 Nov 2026 00:32:31 +0700 Subject: [Slackbuilds-users] Maintenance Update Message-ID: <20261108003231.4e678da9@home.slackie.org> Hi everyone We want to let you know that the scheduled maintenance is now completed and the submission form is now back open. If you find any issue after the maintenance, please let us know Thanks to all admins who performs the maintenance during their weekend time. -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 870 bytes Desc: OpenPGP digital signature URL: From milgram at cgpp.com Sun Nov 8 22:57:36 2026 From: milgram at cgpp.com (J. Milgram) Date: Sun, 8 Nov 2026 17:57:36 -0500 Subject: [Slackbuilds-users] [SOLVED] Re: FlightGear In-Reply-To: <472a3543-4202-49cb-947f-56ebed4728d8@cgpp.com> References: <87e0de2c-2e3f-42d8-8333-739e5bad6d99@cgpp.com> <18574d1c-5585-4775-bf08-6cf8b497c3c3@dorfdsl.de> <472a3543-4202-49cb-947f-56ebed4728d8@cgpp.com> Message-ID: Sparing everyone the gory details, this seemed to do the trick: On 11/5/26 14:30, J. Milgram wrote: > > As near as I can tell, it's in iaxclient which is (apparently) an > external library bundled with the FlightGear source. Haven't figured > out which version of iaxclient comes with FlightGear but looking at > the v2.0.2 source from https://sourceforge.net/projects/iaxclient/ it > looks like the declarations match. I guess the next step is to see if > the official iaxclient builds... > > Will report back. > > JM > > > On 11/5/26 10:05, Marco Moock wrote: >> Am 05.11.26 um 06:01 schrieb J. Milgram via SlackBuilds-users: >>> >>> Getting an error building FlightGear v2024.1.1: >>> >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/ >>> audio_openal.c:262:5: error: conflicting types for >>> ?openal_initialize?; have ?int(struct iaxc_audio_driver *, int)? >>> ?? 262 | int openal_initialize(struct iaxc_audio_driver *d, int >>> sample_rate) >>> ?? ? ? |? ? ?^~~~~~~~~~~~~~~~~ >>> In file included from >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ >>> lib/iaxclient_lib.h:246, >>> ?? ? ? ? ? ? ? ? ?from >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ lib/audio_openal.c:1: >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.h:4:5: >>> note: previous declaration of ?openal_initialize? with type ?int(void)? >>> ?? ? 4 | int openal_initialize(); >>> >>> >>> Anyone else seeing this? >>> >>> Should I try to patch audio_openal.h to make the declarations align, >>> or is there some easier fix? >> >> Did you figure out if that is an issue of FlightGear or an external >> library? >> >> >> _______________________________________________ >> SlackBuilds-users mailing list >> SlackBuilds-users at slackbuilds.org >> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users >> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ >> FAQ - https://slackbuilds.org/faq/ >> > -- ===== milgram at cgpp.com 301-257-7069 From milgram at cgpp.com Sun Nov 8 22:59:49 2026 From: milgram at cgpp.com (J. Milgram) Date: Sun, 8 Nov 2026 17:59:49 -0500 Subject: [Slackbuilds-users] [SOLVED] Re: FlightGear In-Reply-To: <472a3543-4202-49cb-947f-56ebed4728d8@cgpp.com> References: <87e0de2c-2e3f-42d8-8333-739e5bad6d99@cgpp.com> <18574d1c-5585-4775-bf08-6cf8b497c3c3@dorfdsl.de> <472a3543-4202-49cb-947f-56ebed4728d8@cgpp.com> Message-ID: <722d25cf-3cc5-48c6-8d28-4e4ab4621235@cgpp.com> Sparing everyone the gory details, this seemed to do the trick: [oops, let's try again] - sboremove'd all dependencies - removed the glibc-2.42 packages I had installed from extra/ to enable? the signal-desktop upgrade, and reinstalled all the stock Slack-15 packages (glibc-2.33) - Rebuilt signal-desktop using the new SlackBuild that puts glibc-2.42 in /opt ... works fine (irrelevant to FlightGear; just reporting.) - Rebuilt one or two other packages that I had built against glibc-2.42 (libheif comes to mind) so they'll run & link under the stock glibc. sboinstall FlightGear and a while later ... I had a package. Haven't gotten it to run properly yet - I suspect an OpenGL issue ...? but that's OK. That's not a Slackbuilds issue, I don't think. thanks again, Judah On 11/5/26 14:30, J. Milgram wrote: > > As near as I can tell, it's in iaxclient which is (apparently) an > external library bundled with the FlightGear source. Haven't figured > out which version of iaxclient comes with FlightGear but looking at > the v2.0.2 source from https://sourceforge.net/projects/iaxclient/ it > looks like the declarations match. I guess the next step is to see if > the official iaxclient builds... > > Will report back. > > JM > > > On 11/5/26 10:05, Marco Moock wrote: >> Am 05.11.26 um 06:01 schrieb J. Milgram via SlackBuilds-users: >>> >>> Getting an error building FlightGear v2024.1.1: >>> >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/ >>> audio_openal.c:262:5: error: conflicting types for >>> ?openal_initialize?; have ?int(struct iaxc_audio_driver *, int)? >>> ?? 262 | int openal_initialize(struct iaxc_audio_driver *d, int >>> sample_rate) >>> ?? ? ? |? ? ?^~~~~~~~~~~~~~~~~ >>> In file included from >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ >>> lib/iaxclient_lib.h:246, >>> ?? ? ? ? ? ? ? ? ?from >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/ lib/audio_openal.c:1: >>> /tmp/SBo/flightgear-v2024.1.1/3rdparty/iaxclient/lib/audio_openal.h:4:5: >>> note: previous declaration of ?openal_initialize? with type ?int(void)? >>> ?? ? 4 | int openal_initialize(); >>> >>> >>> Anyone else seeing this? >>> >>> Should I try to patch audio_openal.h to make the declarations align, >>> or is there some easier fix? >> >> Did you figure out if that is an issue of FlightGear or an external >> library? >> >> >> _______________________________________________ >> SlackBuilds-users mailing list >> SlackBuilds-users at slackbuilds.org >> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users >> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ >> FAQ - https://slackbuilds.org/faq/ >> > -- ===== milgram at cgpp.com 301-257-7069 From rizitis at gmail.com Tue Nov 10 16:44:00 2026 From: rizitis at gmail.com (Yiannis) Date: Tue, 10 Nov 2026 18:44:00 +0200 Subject: [Slackbuilds-users] sbo-maintainer-tools-0.9.9 Message-ID: I have this issue: sbopkglint /tmp/bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz Using tests from /usr/share/sbo-maintainer-tools/sbopkglint.d Exploding /tmp/bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz to /tmp/SBo/sbopkglint.PJkz8U ...OK Running pre-doinst test...OK Installing /tmp/bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz to /tmp/SBo/sbopkglint.PJkz8U ...OK Running test: 05-basic-sanity...OK Running test: 10-docs...OK Running test: 15-noarch...OK Running test: 20-arch...OK Running test: 25-lafiles...OK Running test: 30-manpages...OK Running test: 35-desktop... --- ERR: unknown file (not .desktop) in desktop dir: -rw-r--r-- 1 root root 15 ??? 10 18:39 usr/share/applications/intent.cache FAILED Running test: 40-newconfig...OK Running test: 45-doinst...OK Running test: 50-icons...OK Running test: 60-usr_info...OK Running test: 65-python...OK Running test: 70-tmp_path...OK Running test: 75-static_libs...OK Running test: 85-perl...OK Running test: 90-terminfo...OK Running test: 95-pkgconfig...OK !!! bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz: 1 failures But in github: https://github.com/SlackBuildsOrg/slackbuilds/pull/18658 the issue does not exist, which is valid. Q: why in my end it does not ignore intent.cache the same way it ignores mimeinfo.cache? -------------- next part -------------- An HTML attachment was scrubbed... URL: From rizitis at gmail.com Tue Nov 10 16:50:11 2026 From: rizitis at gmail.com (Yiannis) Date: Tue, 10 Nov 2026 18:50:11 +0200 Subject: [Slackbuilds-users] sbo-maintainer-tools-0.9.9 In-Reply-To: References: Message-ID: OK I found it sbopkglint 35-desktop fails on packages that run update-desktop-database in doinst.sh, with *desktop-file-utils 0.29 in -current* desktop-file-utils 0.29 makes update-desktop-database write intent.cache (XDG Intent-Apps cache, for the Implements= key) next to mimeinfo.cache. It is created at install time, it is not in the package. So 35-desktop should ignore intent.cache the same way it ignores mimeinfo.cache but 15.0 is not affected, only current. ???? ??? 10 ??? 2026 ???? 6:44??.?., ?/? Yiannis ??????: > I have this issue: > > sbopkglint /tmp/bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz > Using tests from /usr/share/sbo-maintainer-tools/sbopkglint.d > Exploding /tmp/bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz to > /tmp/SBo/sbopkglint.PJkz8U ...OK > Running pre-doinst test...OK > Installing /tmp/bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz to > /tmp/SBo/sbopkglint.PJkz8U ...OK > Running test: 05-basic-sanity...OK > Running test: 10-docs...OK > Running test: 15-noarch...OK > Running test: 20-arch...OK > Running test: 25-lafiles...OK > Running test: 30-manpages...OK > Running test: 35-desktop... > --- ERR: unknown file (not .desktop) in desktop dir: > -rw-r--r-- 1 root root 15 ??? 10 18:39 usr/share/applications/intent.cache > FAILED > Running test: 40-newconfig...OK > Running test: 45-doinst...OK > Running test: 50-icons...OK > Running test: 60-usr_info...OK > Running test: 65-python...OK > Running test: 70-tmp_path...OK > Running test: 75-static_libs...OK > Running test: 85-perl...OK > Running test: 90-terminfo...OK > Running test: 95-pkgconfig...OK > !!! bsky-desktop-bin-1.3.1-x86_64-1_SBo.tgz: 1 failures > > But in github: https://github.com/SlackBuildsOrg/slackbuilds/pull/18658 > the issue does not exist, which is valid. > > Q: why in my end it does not ignore intent.cache the same way it ignores > mimeinfo.cache? > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From urchlay at slackware.uk Tue Nov 10 21:45:13 2026 From: urchlay at slackware.uk (B. Watson) Date: Tue, 10 Nov 2026 16:45:13 -0500 (EST) Subject: [Slackbuilds-users] sbo-maintainer-tools-0.9.9 In-Reply-To: References: Message-ID: <3b196143-2c87-bc98-527b-20558a1ed6@slackware.uk> On Tue, 10 Nov 2026, Yiannis wrote: > So 35-desktop should ignore intent.cache the same way it ignores > mimeinfo.cache but 15.0 is not affected, only current. It looks like the issue is caused by -current's update to desktop-file-utils-0.29, which just happened on November 9 (yesterday). I just became aware of this issue about 12 hours ago, and applied a fix to sbo-maintainer-tools. Will do a release in time for this weekend's SBo update.