[Slackbuilds-users] calibre will not build

[Larry Hajali]

I'll take a look at it this weekend.  I haven't looked at this for a while
so I will need to troubleshoot.

Thanks,
--Larry

On Tue, Jun 2, 2020 at 9:20 AM Chris Abela <kristofru at gmail.com> wrote:

> That brings out nothing:
>
> $ grep \/tmp /proc/mounts
>
> $ cat /proc/mounts
> proc /proc proc rw,relatime 0 0
> sysfs /sys sysfs rw,relatime 0 0
> tmpfs /run tmpfs rw,nosuid,nodev,noexec,relatime,size=32768k,mode=755 0 0
> devtmpfs /dev devtmpfs rw,relatime,size=8192k,nr_inodes=1009193,mode=755 0
> 0
> /dev/myvg/root / ext4 rw,relatime,stripe=32736,data=ordered 0 0
> devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
> tmpfs /dev/shm tmpfs rw,relatime 0 0
> cgroup_root /sys/fs/cgroup tmpfs rw,relatime,mode=755 0 0
> cpuset /sys/fs/cgroup/cpuset cgroup rw,relatime,cpuset,clone_children 0 0
> cpu /sys/fs/cgroup/cpu cgroup rw,relatime,cpu 0 0
> cpuacct /sys/fs/cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0
> blkio /sys/fs/cgroup/blkio cgroup rw,relatime,blkio 0 0
> memory /sys/fs/cgroup/memory cgroup rw,relatime,memory 0 0
> devices /sys/fs/cgroup/devices cgroup rw,relatime,devices 0 0
> freezer /sys/fs/cgroup/freezer cgroup rw,relatime,freezer 0 0
> net_cls /sys/fs/cgroup/net_cls cgroup rw,relatime,net_cls 0 0
> perf_event /sys/fs/cgroup/perf_event cgroup
> rw,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event
> 0 0
> net_prio /sys/fs/cgroup/net_prio cgroup rw,relatime,net_prio 0 0
> pids /sys/fs/cgroup/pids cgroup
> rw,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids
> 0 0
> fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
> /dev/mapper/myvg-boot /boot ext4 rw,relatime,data=ordered 0 0
> /dev/mapper/myvg-home /home ext4 rw,relatime,data=ordered 0 0
> /dev/mapper/myvg-www /var/www ext4 rw,relatime,stripe=32748,data=ordered 0
> 0
> cgmfs /run/cgmanager/fs tmpfs rw,relatime,size=100k,mode=755 0 0
>
>
>
> On Tue, Jun 2, 2020 at 5:50 PM Matteo Bernardini <
> matteo.bernardini at gmail.com> wrote:
>
>> IMHO you could verify it with a
>>
>> grep \/tmp /proc/mounts
>>
>> Il mar 2 giu 2020, 17:35 Chris Abela <kristofru at gmail.com> ha scritto:
>>
>>> No Matteo,
>>>
>>> $ ls -ld /tmp
>>> drwxrwxrwt 12 root root 102400 Jun  2 17:29 /tmp/
>>>
>>> I notice that I missed some dependencies as my queue files were
>>> outdated. My building machine is very slow, so please stand-by until I
>>> update you.
>>>
>>> Chris
>>>
>>> On Tue, Jun 2, 2020 at 5:16 PM Matteo Bernardini <
>>> matteo.bernardini at gmail.com> wrote:
>>>
>>>> Seeing that "permissione denied" makes me think that you are trying to
>>>> build it with a /tmp filesystem mounted with a "noexec" option...
>>>> Is that the case?
>>>> If It is, try to export a different TMP for building just calibro.
>>>>
>>>> Il mar 2 giu 2020, 17:02 Chris Abela <kristofru at gmail.com> ha scritto:
>>>>
>>>>> I have installed updated packages of all the dependencies but clibre
>>>>> will still not build:
>>>>>
>>>>> ####### Building extension podofo #######
>>>>>
>>>>> ####### Building extension pictureflow #######
>>>>> Traceback (most recent call last):
>>>>>   File "setup.py", line 121, in <module>
>>>>>     sys.exit(main())
>>>>>   File "setup.py", line 106, in main
>>>>>     command.run_all(opts)
>>>>>   File "/tmp/SBo/calibre-3.34.0/setup/__init__.py", line 242, in
>>>>> run_all
>>>>>     self.run_cmd(self, opts)
>>>>>   File "/tmp/SBo/calibre-3.34.0/setup/__init__.py", line 234, in
>>>>> run_cmd
>>>>>     self.run_cmd(scmd, opts)
>>>>>   File "/tmp/SBo/calibre-3.34.0/setup/__init__.py", line 238, in
>>>>> run_cmd
>>>>>     cmd.run(opts)
>>>>>   File "/tmp/SBo/calibre-3.34.0/setup/build.py", line 278, in run
>>>>>     self.build(ext, dest)
>>>>>   File "/tmp/SBo/calibre-3.34.0/setup/build.py", line 301, in build
>>>>>     return self.build_pyqt_extension(ext, dest)
>>>>>   File "/tmp/SBo/calibre-3.34.0/setup/build.py", line 488, in
>>>>> build_pyqt_extension
>>>>>     with open(os.path.join(src_dir, sip['target'] + '.exp'), 'wb') as
>>>>> f:
>>>>> IOError: [Errno 13] Permission denied:
>>>>> u'/tmp/SBo/calibre-3.34.0/build/pyqt/pictureflow/pictureflow.exp'
>>>>> _______________________________________________
>>>>> SlackBuilds-users mailing list
>>>>> SlackBuilds-users at slackbuilds.org
>>>>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
>>>>> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
>>>>> FAQ - https://slackbuilds.org/faq/
>>>>>
>>>>> _______________________________________________
>>>> SlackBuilds-users mailing list
>>>> SlackBuilds-users at slackbuilds.org
>>>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
>>>> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
>>>> FAQ - https://slackbuilds.org/faq/
>>>>
>>>> _______________________________________________
>>> SlackBuilds-users mailing list
>>> SlackBuilds-users at slackbuilds.org
>>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
>>> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
>>> FAQ - https://slackbuilds.org/faq/
>>>
>>> _______________________________________________
>> SlackBuilds-users mailing list
>> SlackBuilds-users at slackbuilds.org
>> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
>> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
>> FAQ - https://slackbuilds.org/faq/
>>
>> _______________________________________________
> SlackBuilds-users mailing list
> SlackBuilds-users at slackbuilds.org
> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
> FAQ - https://slackbuilds.org/faq/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.slackbuilds.org/pipermail/slackbuilds-users/attachments/20200612/ccbeb6f1/attachment.htm>