[Slackbuilds-users] [13.37] w3m SB fails on x86_64 (dependency missing?)

[Felix Pfeifer]

Hi all,

i updated the script and will submit it now, it should work
on slackware 64. I'll test it on 32 bit later tonight.
Sorry for the delay.

greetings
Felix

2011/5/8  <xgizzmo at slackbuilds.org>:
> On Sunday 08 May 2011 14:23:33 Dario Niedermann wrote:
>> The slackbuild for w3m 0.5.2 fails on 13.37 x86_64 with the following
>> error:
>>
>> -----
>> make[2]: Entering directory `/tmp/SBo/w3m-0.5.2/po'
>> rm -f ja.gmo && : -c --statistics -o ja.gmo ja.po
>> mv: cannot stat `t-ja.gmo': No such file or directory
>> make[2]: *** [ja.gmo] Error 1
>> make[2]: Leaving directory `/tmp/SBo/w3m-0.5.2/po'
>> make[1]: *** [stamp-po] Error 2
>> make[1]: Leaving directory `/tmp/SBo/w3m-0.5.2/po'
>> make: *** [po] Error 2
>> Exit 2
>> -----
>>
>> This might be the result of some missing dependency (gettext-tools ?)
>> that is not declared on the slackbuild's page or README file.
>>
>> Anyway, I modified the script in order to build w3m 0.5.3. The
>> changes are:
>>
>> - patch 'w3m-0.5.2-nulcn.patch' was removed, since it has already
>>   been applied to the upstream 0.5.3 source, as detected by the `patch`
>>   program;
>>
>> - NLS was disabled because it was causing the above build error, and I
>>   personally don't need it;
>>
>> - enabled the 'w3m' keymap rather than the 'lynx'-style keymap (this is
>>   a simple `configure` option).
>>
>> If you want the new slackbuild, download it at:
>>
>>       http://devio.us/~ndr/downloads/w3m-0.5.3.tgz
>>
>>
>> Diff between the two slackbuilds (SBo's 0.5.2 and my own 0.5.3) follows:
>>
>> =====BEGIN DIFF=====
>> Common subdirectories: w3m-0.5.2/patches and w3m-0.5.3/patches
>> diff -u w3m-0.5.2/w3m.SlackBuild w3m-0.5.3/w3m.SlackBuild
>> --- w3m-0.5.2/w3m.SlackBuild  2011-04-15 10:47:28.000000000 +0200
>> +++ w3m-0.5.3/w3m.SlackBuild  2011-05-08 19:32:54.000000000 +0200
>> @@ -2,10 +2,11 @@
>>
>>  # Slackware build script for w3m
>>  # Written by slakmagik <jsun at freeshell.org>
>> +# Modified for w3m version 0.5.3 by Dario Niedermann <dnied at tiscali.it>
>>  # Released under the WTFPL
>>
>>  PRGNAM=w3m
>> -VERSION=0.5.2
>> +VERSION=0.5.3
>>  BUILD=${BUILD:-1}
>>  TAG=${TAG:-_SBo}
>>
>> @@ -59,7 +60,6 @@
>>  patch -p1 < $CWD/patches/w3m-0.4.1-helpcharset.patch
>>  patch -p1 < $CWD/patches/w3m-0.5.1-gcc4.patch
>>  patch -p1 < $CWD/patches/w3m-0.5.2-multilib.patch
>> -patch -p1 < $CWD/patches/w3m-0.5.2-nulcn.patch
>>  patch -p1 < $CWD/patches/w3m-0.5.2-ssl_verify_server_on.patch
>>
>>  CFLAGS="$SLKCFLAGS" \
>> @@ -67,8 +67,9 @@
>>  ./configure \
>>    --prefix=/usr \
>>    --mandir=/usr/man \
>> -  --enable-keymap=lynx \
>> +  --enable-keymap=w3m \
>>    --enable-gopher \
>> +  --disable-nls \
>>    --build=$ARCH-slackware-linux \
>>    --host=$ARCH-slackware-linux
>>
>> diff -u w3m-0.5.2/w3m.info w3m-0.5.3/w3m.info
>> --- w3m-0.5.2/w3m.info        2011-04-15 10:47:28.000000000 +0200
>> +++ w3m-0.5.3/w3m.info        2011-05-08 19:21:40.000000000 +0200
>> @@ -1,8 +1,8 @@
>>  PRGNAM="w3m"
>> -VERSION="0.5.2"
>> +VERSION="0.5.3"
>>  HOMEPAGE="http://w3m.sourceforge.net/"
>> -DOWNLOAD="http://downloads.sourceforge.net/w3m/w3m-0.5.2.tar.gz"
>> -MD5SUM="ba06992d3207666ed1bf2dcf7c72bf58"
>> +DOWNLOAD="http://downloads.sourceforge.net/w3m/w3m-0.5.3.tar.gz"
>> +MD5SUM="1b845a983a50b8dec0169ac48479eacc"
>>  DOWNLOAD_x86_64=""
>>  MD5SUM_x86_64=""
>>  MAINTAINER="Felix Pfeifer"
>> =====END DIFF=====
>>
>> _______________________________________________
>> SlackBuilds-users mailing list
>> SlackBuilds-users at slackbuilds.org
>> http://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
>> Archives - http://lists.slackbuilds.org/pipermail/slackbuilds-users/
>> FAQ - http://slackbuilds.org/faq/
>>
>>
>
> It maybe a parallel make error, if you are running make with more than 1 job
> try it with make -j1.
> _______________________________________________
> SlackBuilds-users mailing list
> SlackBuilds-users at slackbuilds.org
> http://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> Archives - http://lists.slackbuilds.org/pipermail/slackbuilds-users/
> FAQ - http://slackbuilds.org/faq/
>
>