[Slackbuilds-users] Scribus-1.4.6: build fails not finding freetype.h

[Sebastien BALLET]

Hello,

The differences between the line I sent in my previous post and the
corresponding line from your last build is as below :

--- /tmp/working_scribus_words.txt      2017-08-05 19:51:25.288007196 +0200
+++ /tmp/non_working_scribus_words.txt  2017-08-05 19:53:34.080012943 +0200
@@ -45,7 +45,7 @@
 -I/usr/lib/qt/mkspecs/default
 -I/usr/include/libxml2
 -I/usr/include/python2.7
--I/usr/include/freetype2
+-I/usr/local/include
 -DSHAREDIR=\"/usr/share/scribus/\"
 -DDOCDIR=\"/usr/share/doc/scribus/\"
 -DICONDIR=\"/usr/share/scribus/icons/\"

I'm wondering why  /usr/include/freetype2 is not found on your side. It
seems (but I can be wrong) that  /usr/local/include is used instead of
/usr/include/freetype2. Maybe you have something in /usr/local/include
which cause your issue.

-- 
SeB

2017-08-05 18:27 GMT+02:00 Rich Shepard <rshepard at appl-ecosys.com>:

> On Sat, 5 Aug 2017, Sebastien BALLET wrote:
>
> I just built scribus 1.4.6 on a 14.1 vm without any issue.
>>
>
> Sebastien,
>
>   Then it must be something here that I don't recognize.
>
> Can you try to build it again in verbose mode and post the output. To do
>> that, you must pass "VERBOSE=1" to make, or run scribus.SlackBuild as
>> below :
>> $ VERBOSE=1 ./scribus.SlackBuild
>>
>
>   It still fails with the same error.
>
>   What I notice in the output (scribus-build.txt.gz attached) is during
> configuration scribus is not going to build with qt3, and that's noted as
> being good. But, on line 49001 of the output file I see that the qt3
> library
> is to be included. Makes no sense to me; I've qt4 and qt5 installed, but
> not
> qt3. And what these have to do with freetype.h may be irrelevant.
>
> Thanks,
>
> Rich
> _______________________________________________
> SlackBuilds-users mailing list
> SlackBuilds-users at slackbuilds.org
> https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
> FAQ - https://slackbuilds.org/faq/
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.slackbuilds.org/pipermail/slackbuilds-users/attachments/20170805/cf26da38/attachment.html>